• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.962-964
• /
• 2003

In this paper, development of portable power interrupt tester to evaluate microprocessor based control circuits for an endurance under abnormal power source. 89C2051 micro-controller is performed to make power interrupt signal, and software controls peripheral hardwares and built-in functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging use.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.253-255
• /
• 2003

Flash memory는 device 특성상 peripheral circuit을 구성하는 transistor의 종류가 다양하고, 이에 따른 각 transistor의 동작 전압 영역이 넓다. 이에 따라 설계 초기의 전기적 특성 스펙 절정을 위해서는, silicon 상에서 소자의 scale down에 따른 전기적 특성을 선 검증하는 과정이 필수적이었으며, 이로 인해 설계 및 소자 개발의 기간을 단축하기 어려웠다. 본 연구에서는 TCAD tool을 사용하여 silicon상에서의 제작 공정을 거치지 않고, 효과적으로 model parameter를 생성할 수 있도록 하는 방법을 제안하여. 전기적 특성 스펙 결정과 설계 단계의 시간 지연을 감소할 수 있도록 한다.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.83-90
• /
• 2004

Generally, electronic appliances are used on the basis of normal power source supply. The power source inevitably includes the abnormal condition, such as, sudden voltage sagging, power interrupt, and induced noises. As the electronic appliances which include micro-controller-based circuits are being increased recently, the controller circuit sometimes malfunctions by the abnormal condition of the power source. This situation causes serious problems such as hitch of electric appliance, fire and medical instrument glitch, which produces serious situations. In this paper, development of power interrupt tester which is highly suitable for an endurance test device under abnormal power source to microprocessor-based circuits is proposed 89C2051 microcontroller is performed to make power interrupt signal, and software controls peripheral hardwares and built-in functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging use.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.553-563
• /
• 2012

Serial peripheral interface (SPI) has been identified as a bottleneck in many wireless sensing systems today. SPI is used almost universally as the physical connection between the microcontroller unit (MCU) and radios, storage devices, and many types of sensors. Virtually all wireless sensor nodes today perform up to twice as many bus transactions as necessary to transfer a given piece of data, as an MCU must serve as the bus master in all transactions. To eliminate this bottleneck, we propose the master-handoff protocol. After the MCU initiates reading from the source slave device and writing to the sink slave device, the MCU as a master becomes a slave, and either the source or the sink slave becomes the temporary master. Experiment results show that this master-handoff technique not only cuts the data transfer time in half, but, more importantly, also enables a superlinear energy reduction.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2091-2093
• /
• 1998

In this paper, development of power interrupt tester which is highly suitable for microprocessor-based circuits test device is proposed. ATMEL 89C2051 microcontroller is performed to make power interrupt signal, and built-in software controls peripheral hardwares and many functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging-use

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.1
• /
• pp.23-28
• /
• 2010

The automotive industry tries to provide infotainment systems to emerging automobiles. Since the infotainment systems require various peripheral devices and network connectivity, legacy operating systems such as Linux and Windows can be much preferred due to its plentiful device drivers and multimedia applications while the operating systems following OSEK standard are used for automotive electronic control units. Thus it is highly desired that the system software supporting infotainment applications can be portable over different legacy operating systems providing unified programming interfaces. The majority of legacy operating systems support POSIX interfaces for application development. MOST is an automotive network standard for infotainment systems. Network Service defines the protocol stacks for MOST control data, which is essential to implement infotainment applications over MOST. In this paper, we suggest a POSIX-based Network Service so that we can utilize legacy device drivers and applications for automotive infotainment systems. We measure the performance of the POSIX-based Network Service and show that its overhead is not significant.

• Journal of Korea Multimedia Society
• /
• v.24 no.6
• /
• pp.825-837
• /
• 2021

The Bluetooth Low Energy profile has the advantage of continuing wireless communication with very little power consumption compared to the existing Bluetooth, so it is widely applied to smart devices. Most of them are applied to Point-to-Point (1:1) communication between Central (Master) and Peripheral (Slave), but can be applied to Point-to-Multiple (1:N) wireless communication through the use of multiple threads and timers. Therefore, in this paper, a precise timer was designed in the BLE profile to devise an image segmentation transmission/reception structure based on multiple access, and a smart image block device applied to it was designed and verified.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.518-523
• /
• 2008

Using network communication, KTX OBCS is KTX's core device which inspects operation status of various electric equipments and supports driving command, train control, train's maintenance, train crew's driving. Since this device is manufactured as specialized system, being dependent on TGV manufacture specification and France's high speed train operation method, actual technic transfer is difficult. Therefore, there are many difficulties, since most of interface signals are connected with OBCS when function improvement, maintenance, various electric equipments(propulsion control device, auxiliary power supply device, door control device etc.) are replaced with localized ones, which are required in operational view after introduction of KTX. Ergo, this study would like to contribute to function improvement and maintenance's efficiency, furthermore to realize technical independence, escaping from dependency of developed foreign technology in high speed train and electric equipments, through KTX OBCS' function analysis and mutual interface information analysis with peripheral device(driver console, PID system, fault display device, various electric equipments).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1603-1609
• /
• 2010

This Paper deals with a design, making a prtotype and test methods of Real-time towed Line Array Sensor Data processing board for fast data communication and long range data transmission with SFM(Serial FPDP Module) through Optic-fiber channel. Towed line array sensors are installed in Frigate and the each LAS A, B, C group data from LAS is packed a previously agreed protocol and transmitted to the signal processing unit. Considering the limited space of VME 6U size, LAS Data processing board is designed with MPC8265 PowerPC Controller of Freescale for main system control and Altera's CycloneIII FPGA for sensor data packing, self-test simulation data generation, S/W FIFO et cetera. LAS Data processing board have VxWorks, the RTOS(Real Time Operating System) that present many device drivers, peripheral control libraries on board for real-time data processing.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.920-930
• /
• 2012

In this paper, we designed and built a wired temperature controller system which is based on ASIC for a wireless temperature controller system based on FPGA. FPGA devices and wireless controller systems are growing quickly especially for industrial systems for sensing temperature and humidity. FPGA can set up a desired system and a CPU, and directly set up or change a peripheral device based on an IP quickly for an affordable price. This wireless system is easy to install in the field where there are lots of changes and the system is complex. It also has advantages for maintenance. In this study, we are using a 32 bit RISC CPU based on MicroBlaze, with a touch interface, peripheral device, and porting the embedded Linux. Also, we added wireless communication using ZigBee. With this system we provide remote monitoring and control through the web by adding a web server. Compared to the original system, we say not only a performance improvement, but also more efficient development and cheaper costs. In this study, we focused especially on building a better development environment and a more effective user interface.