• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.184-196
• /
• 2020

In this paper, a single-bit 2nd-order delta-sigma modulator with the architecture of cascaded-of-integrator feedforward (CIFF) is proposed for precision measurement of current flowing through a secondary cell battery in a battery management system (BMS). The proposed modulator implements two switched capacitor integrators and a single-bit comparator with peripheral circuits such as a non-overlapping clock generator and a bias circuit. The proposed structure is designed to be applied to low-side current sensing method with low common mode input voltage. Using the low-side current measurement method has the advantage of reducing the burden on the circuit design. In addition, the ±30mV input voltage is resolved by the ADC with 15-bit resolution, eliminating the need for an additional programmable gain amplifier (PGA). The proposed a single-bit 2nd-order delta-sigma modulator has been implemented in a 350-nm CMOS process. It achieves 95.46-dB signal-to-noise-and-distortion ratio (SNDR), 96.01-dB spurious-free dynamic range (SFDR), and 15.56-bit effective-number-of-bits (ENOB) with an oversampling ratio (OSR) of 400 for 5-kHz bandwidth. The area and power consumption of the delta-sigma modulator are 670×490 ㎛2 and 414 ㎼, respectively.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.33-39
• /
• 2016

With recent advances in sensor technology, CMOS-based semiconductor devices and networking protocol, the areas for application of wireless sensor networks greatly expanded and diversified. Such diversification of uses for wireless sensor networks creates a multitude of beneficial possibilities for several industries. In the application of wireless sensor networks for monitoring systems' data transmission process from the sensor node to the sink node, transmission through multi-hop paths have been used. Also mobile sink techniques have been applied. However, high energy costs, unbalanced energy consumption of nodes and time gaps between the measured data values and the actual value have created a need for advancement. Therefore, this thesis proposes a new model which alleviates these problems. To reduce the communication costs due to frequent data exchange, a State Prediction Model has been developed to predict the situation of the peripheral node using a geographic autocorrelation of sensor nodes constituting the wireless sensor networks. Also, a Risk Analysis Model has developed to quickly alert the monitoring system of any fatal abnormalities when they occur. Simulation results have shown, in the case of applying the State Prediction Model, errors were smaller than otherwise. When the Risk Analysis Model is applied, the data transfer latency was reduced. The results of this study are expected to be utilized in any efficient communication method for wireless sensor network monitoring systems where all nodes are able to identify their geographic location.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.463-470
• /
• 2022

Intravenous injection is widely used for patient treatment, including injection drugs, fluids, parenteral nutrition, and blood products, and is the most frequently performed invasive treatment for inpatients, including blood collection, peripheral catheter insertion, and other IV therapy, and more than 1 billion cases per year. Intravenous injection is one of the difficult procedures performed only by experienced nurses who have been trained in intravenous injection, and failure can lead to thrombosis and hematoma or nerve damage to the vein. Nurses who frequently perform intravenous injections may also make mistakes because it is not easy to detect veins due to factors such as obesity, skin color, and age. Accordingly, studies on auxiliary equipment capable of visualizing the venous structure of the back of the hand or arm have been published to reduce mistakes during intravenous injection. This paper is about the development of venous detection equipment that visualizes venous structure during intravenous injection, and the optimal combination was selected by comparing the brightness of acquired images according to the combination of near-infrared (NIR) LED and Filter with different wavelength bands. In addition, an image processing algorithm was derived to threshehold and making blood vessel part to green through grayscale conversion, histogram equilzation, and sharpening filters for clarity of vein images obtained through the implemented venous detection experimental module.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.485-491
• /
• 2022

Intravenous injection is the most frequent invasive treatment for inpatients and is widely used for parenteral nutrition administration and blood products, and more than 1 billion procedures are used for peripheral catheter insertion, blood collection, and other IV therapy per year. Intravenous injection is one of the difficult procedures to be performed only by trained nurses with intravenous injection training, and failure can lead to thrombosis and hematoma or nerve damage to the vein. Accordingly, studies on auxiliary equipment capable of visualizing the vein structure of the back of the hand or arm are being published to reduce errors during intravenous injection. This study is a study on the performance difference according to the number of LEDs irradiating the 850nm wavelength band on a vein detector that visualizes the vein during intravenous injection. Four LED PCBs were produced by attaching NIR filters to CCD and CMOS camera lenses irradiated on the skin to acquire images, sharpen the acquired images using image processing algorithms, and project the sharpened images onto the skin. After that, each PCB was attached to the front end of the vein detector to detect the vein image and create a performance comparison questionnaire based on the vein image obtained for performance evaluation. The survey was conducted on 20 nurses working at K Hospital.

• Information Systems Review
• /
• v.25 no.2
• /
• pp.77-101
• /
• 2023

Due to COVID-19, paid virtual live-stream concerts have emerged as an alternative format and a new revenue model for in-person live concerts. Despite the increasing scholarly and practical interest in how participants experience paid virtual live-stream concerts, few studies examined participants' consumption and participation experiences. Thus, this study aims to provide insights into consumers' virtual live-stream concert experience by employing social representations theory (SRT). We explore the features of paid virtual live-stream concerts based on the C-P-N-D (Content-Platform-Network-Device) framework and the consumers' cognitive and affective perception. To this end, an SRT-based core-periphery analysis was conducted based on 239 responses to the open-ended survey questions. The results show that network-and device-level features of virtual live concerts and participants' overall perception are presented as core elements of paid virtual live-stream concerts, whereas content- and platform-level features are peripheral elements. This finding provides an in-depth understanding of the emergence of paid virtual live-stream concerts as an alternative concert format, thereby providing an invaluable understanding of a virtual live concert experience and theoretical and practical insights.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.

• Journal of Korean Academy of Nursing
• /
• v.23 no.2
• /
• pp.299-315
• /
• 1993

Koreans are one of the fastest growing immigrant groups in America. Stress responses and stressors among this large cultural minority has been rarely been studied by nursing researchers. Adjusting to life in foreign country produces a great deal of stress. Differences in culture, language, expectations and social behavior can lead to misunderstandings between health care providers and clients. These misunderstandings are not well accounted for in health assessment. This study investigated the relationship between life events or / and daily activities as a stressor and the symptoms of stress among a sample of Korean immigrants in America. The symptoms of stress scale (SOS) was used to identify stress responses and open-ended questions were used to identify life events and daily activities considered by the respondents to be stressful. A simple random sample of 283 subjects was selected from the Directory of the Korean Society of Chicago, New York, Los Angeles, Philadelphia and Seattle. Demographically, the subjects ranged in age from 20 to 69 years, and the percentage of women and men was approximately 50% each. Almost ninety percent of the subjects were highly educated, 17% owners of business, 19% white collar professionals, 14% employed in sales or as skilled /unskilled labor, 27% as housewives and students and 3％ had no occupation. The total group SOS mean was 0.8042 ; the SOS men for man was 0.7371, and for women was 0.8713. The stress response of this subject group was high, -the stress response of women higher than that for men. In an earlier study(June, 1992) with another sample, the total mean SOS score was similar to this one. The main stressful life events or / and daily activities were, in order, economic problems (N=97), interpersonal problems (N=68), children care problems (N=258), health problems (N=49), communication problems (N=42), family problems (N=38), worry about future career (N=36), and religious problems (N=25). There was a significant difference in the SOS means between the group that expressed life events or / and daily activities to be stressful and the group that did not. Interpersonal relationships and economic and family problems were stressors for those who complained about peripheral manifestations. cardiopulmonary symptoms, central-neurological symptoms, gastrointestinal symptoms, muscle ten-sion, habitual patterns, depression, anxiety, emotional irritability and cognitive disorganization. In summary, interpersonal relationships and economic and family problems influenced stress response manifestations. Income, the number of people in the family, the year of immigration. the level of education, and marital status were related to physiological and psychosocial stress responses.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.51-62
• /
• 2003

This paper presents a novel survivor memeory management and decoding techniques with sequential backward state transition control in the trace back Viterbi decoder. The Viterbi algorithm is an maximum likelihood decoding scheme to estimate the likelihood of encoder state for channel error detection and correction. This scheme is applied to a broad range of digital communication such as intersymbol interference removing and channel equalization. In order to achieve the area-efficiency VLSI chip design with high throughput in the Viterbi decoder in which recursive operation is implied, more research is required to obtain a simple systematic parallel ACS architecture and surviver memory management. As a method of solution to the problem, this paper addresses a progressive decoding algorithm with sequential backward state transition control in the trace back Viterbi decoder. Compared to the conventional trace back decoding techniques, the required total memory can be greatly reduced in the proposed method. Furthermore, the proposed method can be implemented with a simple pipelined structure with systolic array type architecture. The implementation of the peripheral logic circuit for the control of memory access is not required, and memory access bandwidth can be reduced Therefore, the proposed method has characteristics of high area-efficiency and low power consumption with high throughput. Finally, the examples of decoding results for the received data with channel noise and application result are provided to evaluate the efficiency of the proposed method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.112-123
• /
• 2011

This study focused on developing strategies of cyber-compact city, combining compact city with information and communications technologies(ICTs), in order to enhance sustainable transportation. The cyber-compact city development is defined as a development that is able to reduce travel by ICTs and encourage people to use transit or non-motorized vehicles such as bicycles for ICT-induced travel (especially, discretionary travel) by compact and mixed land use. It can be achieved with combining cyber and compact strategies with respect to network, node, and area. For example, ICT network may use transit network facility, a transfer station may be a hub of ICTs, and transit influenced zone may work with ICT service area. We proposed three cohesive strategies for the cyber-compact city based on literature review and case studies on cyber and compact cities. The first strategy is a cohesion between public transportation and telecommunication network by centering on the two for national and urban spatial linkage structure. That is, cities or urban centers and its peripheral areas can be connected by rail network, and extra space of railway network can be used for constructing telecommunication network infrastructure. The second strategy is a cohesion between public transportation node and telecommunication node by building up regional and urban telecommunication centers near to or at main railway stations. For this strategy, telework centers and communication service centers should be established mainly at transfer stations. The third strategy is a cohesion between public transportation impact zone and telecommunication impact zone as transit oriented development.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.14-21
• /
• 2011

A 10b 500MS/s $0.13{\mu}m$ CMOS ADC is proposed for 4G wireless communication systems such as a LTE-Advanced and SDR The ADC employs a calibration-free single-channel folding architecture for low power consumption and high speed conversion rate. In order to overcome the disadvantage of high folding rate, at the fine 7b ADC, a cascaded folding-interpolating technique is proposed. Further, a folding amplifier with the folded cascode output stage is also discussed in the block of folding bus, to improve the bandwidth limitation and voltage gain by parasitic capacitances. The chip has been fabricated with $0.13{\mu}m$ 1P6M CMOS technology, the effective chip area is $1.5mm^2$. The measured results of INL and DNL are within 2.95LSB and l.24LSB at 10b resolution, respectively. The SNDR is 54.8dB and SFDR is 63.4dBc when the input frequency is 9.27MHz at sampling frequency of 500MHz. The ADC consumes 150mW($300{\mu}W/MS/s$) including peripheral circuits at 500MS/s and 1.2V(1.5V) power supply.