• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권1호
• /
• pp.64-71
• /
• 2016

This paper proposes nonlinear behavior in a love model for Romeo and Juliet with an external force of discontinuous time. We investigated the periodic motion and chaotic behavior in the love model by using time series and phase portraits with respect to some variable and fixed parameters. The computer simulation results confirmed that the proposed love model with an external force of discontinuous time shows periodic motion and chaotic behavior with respect to parameter variation.

• 한국전자통신학회논문지
• /
• 제11권1호
• /
• pp.87-92
• /
• 2016

Van der Pol 발진기는 비선형 제동 현상을 가진 비보존 발진기로서 높은 진폭에서의 에너지는 소산적이며 (dissipative)이고 낮은 진폭들에서는 생성되는 구조를 가진다. 본 논문에서는 Van Der Pol 발진기 모델에서 다른 거동을 확인하기 위하여 주기적 외력을 인가하고 여기에서 파라미터 변화에 따라 어떻게 리미트 사이클이 변화하는지에 대한 패턴을 확인하고자 한다.

• 한국전자통신학회논문지
• /
• 제11권2호
• /
• pp.191-196
• /
• 2016

Van der Pol 발진기는 비선형 제동 현상을 가진 비보존 발진기로서 높은 진폭에서의 에너지는 소산적이며 낮은 진폭들에서는 생성되는 구조를 가진다. 본 논문에서는 분수 차수를 가지는 Van der Pol 발진기 모델에서 주기적 외력을 인가하였을 경우 분수차수로 표현되는 미분 방정식에서 분수차수의 파라미터 변화에 따른 리미트 사이클이 변화 상태를 확인하고자 한다.

• 한국전자통신학회논문지
• /
• 제10권7호
• /
• pp.845-850
• /
• 2015

사람의 감정 중의 하나인 사랑은 사회학과 심리학에서 주된 관심사로 연구되어 왔다. 기본적인 사랑 모델에서 비선형 특성을 찾기는 어렵다. 따라서 본 논문에서는 기본적인 사랑모델에서 비선형 거동을 찾기 위하여 기본적인 사랑 방정식에 외력을 주고 이때의 시계열과 위상 공간을 통하여 비선형 거동이 있음을 확인한다. 또한 이 비선형거동이 일반 카오스 발생현상인 주기배증과정, 카오스, 주기과정의 현상과 유사하게 유사한 주기 배증 과정, 카오스, 주기과정이 있음을 확인한다.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.119-125
• /
• 1997

The drilling experiment of carbon fiber epoxy composite material with WC-drill has been done under the various cutting conditions in order to minimize the problems occurred in the material while being drilled. It has been confirmed by a frequency analysis of the cutting force signals that the variation of cutting force resulted from the periodic variation of the angle between the ortating drill and the stacking angle of the carbon fiber. By the drilling experiment with several drills having different point angles, the drilling char- acteristics, which show the relations between the change in the point angle and cutting force or external surface condition, were analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.543-548
• /
• 2000

Vibration localization of a periodic structure with mistuning is presented in this paper. Mistuning in periodic structures can lead to an increase of the forced response which is much larger than those of perfectly tuned assembly. Thus, mistuning has a critical impact on high cycle fatigue in structures, and it is of great importance to predict the mistuned forced response in efficient manner. In this paper, forced response of a coupled pendulum is investigated to identify localization effects of periodic structures. The effects of mistuning and damping on the maximum forced response are examined. It is seen that in certain condition of mistuning and coupling, strong localization occurs and this can be significant under weak damping.

• 한국가시화정보학회지
• /
• 제12권1호
• /
• pp.30-34
• /
• 2014

Bluff bodies under the external periodic force vibrate at their own natural or forced frequency. Rectangular bodies or similar structures such as high-rise towers and apartments, and recently a well-cited application - offshore floating bodies, usually needs to reduce these vibrations for stability and the mode control. Therefore, this study is aiming to reduce or control the vibration of a structure by a passive control method, i.e., TLCD (Tuned Liquid Column Damper). Controlling a moving body with a TLCD based on a variety of the orifice shape has been preliminary studied. In order to get a proper control, an optimized study is made on the design of the orifice shape, which has internal plates with the holes. The results show the force acting on the body due to the periodic movement highly depends on the number of holes on the plate and the height of the water level. Therefore, the optimum shape of the orifice and the height of the water level should be confirmed by a series of experiments.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.52-60
• /
• 2002

The purpose of this research is to study the vibration and acoustic pressure radiation from a thin isotropic flat plate stiffened by a rectangular array of beams, and excited by a time harmonic point force. These constructions on aircraft and ship structures are often subjected to fiequency dependent pressure fluctuations and forces. Forces from the these excitations induce structural vibrations in a wide range of fiequencies, which may cause such things as acoustic fatigue and internal cabin noise in the aircraft. It is thus important that the response characteristics and vibration modes of such periodic structures be horn. From this theoretical model, the sound pressure levels(SPL) in a semi-infinite fluid(water) bounded by the plate with the variation in the locations of an external time harmonic point farce on the plate can be calculated efficiently using three numerical tools such as the Gauss-jordan method the LU decomposition method md the IMSL numerical package.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1212-1217
• /
• 2006

This study is concerned with static and sinusoidal disturbance rejection for a single periodic input disturbance with known period. In the area of active elimination of a disturbance force, the control input should have two different kinds of gains: one is to deliver a stable control and the other is a force component to cancel the external disturbance force. In this paper we employ a simple state feedback control law to make the balance beam stable and employ a linear observer to estimate the states which represent the external disturbance force components. Simulation results verify our proposed control method to reject a static and sinusoidal disturbance force.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.55-61
• /
• 2008

This paper discusses the advantages of using Fourier-based periodic excitation and of combining internal and external models in dynamic robot parameter identification. Internal models relate the joint torques or forces with the motion of the robot; external models relate the reaction forces and torques on the bedplate with the motion data. This combined model allows to combine joint torque/force and reaction torque/force measurements in one parameter estimation scheme. This combined model estimation will yield more accurate parameter estimates, and consequently better predictions of actuator torque, which is shown by means of a simulated experiment on a CRS A465 industrial robot.