• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.441-442
• /
• 2009

Concrete has some self-healing ability if the crack is occurred. Concrete with a inorganic-organic chemical compound, self-healing ability is increased at the surface of the crack. In this study, we investigate self-healing performance of concrete using admixutre by performing permeability test.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.20-27
• /
• 2001

A variable configuration tracked vehicle(VCTV) is developed to reduce turning energy and improve climbing ability for stairs. This mechanism has four track T-type frames. By changing the driving direction, each track T-type frame rotates to minimize the contact area with ground. It also has better performance than other VCTV in energy consumption of turning. Futhermore this mechanism is more stable than other VCTV on the rough terrain. When climbing stairs, each track T-type frame rotates to obtain a front attack angle and keep stability on steep stairs. The design parameters of components of track T-type frames are optimized to enhance the performance of climbing stairs. Performance indices include a stable angle, a climbing ability, a height of the vertical obstacle. In case that the overall length of the mechanism is 0.2m, it is required that the radius of the wheels should be 5mm and the length track contacted with he ground should be 0.09m to climb higher and steeper stairs.

• 아동학회지
• /
• 제30권1호
• /
• pp.127-148
• /
• 2009

This study investigated the effects on task performance of dyad collaboration based on young children's cognitive and social ability. The 108 5-year-old subjects were assigned to a collaborative experimental group, a comparison group working individually in sorting, writing, and making a puzzle, or a control group. Data from before and after measurements on sorting and perspective taking tasks were analyzed by t-test and ANOVA. Results showed that (1) Children working in dyad collaboration obtained significantly more improvement in their performance on both tasks than those working individually. (2) Dyads composed of a child with high level social skill but low level intelligence and a child with low levels of both showed most improvement in performance on the perspective taking task.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.268-274
• /
• 2008

This paper presents a proposed position controller for a vector controlled induction motor. The position controller design depends on the rotational motion equations and a classical speed controller (CSC) performance. The CSC is designed to have the ability to track variable reference inputs and to provide a predefined system performance. Standard position controller in industry is presented to analyze its performance and its drawbacks. Then the proposed position controller is designed, based on the well defined rotational motion equations. The proposed position controller and the CSC are applied to control the position and speed of the vector controlled induction motor with different ratings. Simulation results at different operating conditions are presented to evaluate the proposed controllers' performance. The results show that the CSC can drive the motor with a predefined speed performance and can track a variable reference speed with an approximately zero steady state error. The results also show that the proposed position controller has the ability to effect high-precision positioning in a limited time and to track a variable reference position with a zero steady state error.

• 지식경영연구
• /
• 제20권4호
• /
• pp.1-22
• /
• 2019

The purpose of this study is to investigate the role of IT-enabled dynamic capability in the relationship between intellectual capital and innovation performance under Industry 4.0. We approach the intellectual capital from the perspective of the resource-based view and define the components of intellectual capital as human capital, social capital, and organizational capital. On the other hand, the IT-based dynamic capability means that the information technology and the utilization ability of the enterprise are combined to overcome the turbulent environment. The empirical results showed that the IT-enabled dynamic capabilities mediated the relationship between intellectual capital and innovation performance as it revealed in theory. And in terms of practical implications, we found the importance of an organization's information technology ability to effectively utilize intangible resources for organizational performance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.73-76
• /
• 2005

This study aims to suggest a simple and convenient design for a mix proportion method for high performance concrete by determining the optimum fine aggregate ratio and minimum binder content based on the maximum density theory. The mix design method introduced in this study adopted the optimum fine aggregate ratio with a minimum void and binder content higher than the minimum binder content level. The research results reveal that the method helps to reduce trial and error in the mixing process and is a convenient way of producing high performance concrete with self filler ability. In an experiment based on the mix proportion method, when aggregate with the fine aggregation ratio of 41$\%$ was used, the minimum binder content of high performance concrete was 470kg/$m^{3}$ and maximum aggregate capacity was $0.657m^{3}/m^{3}$. In addition, in mixing high performance concrete, the optimal slump flow to meet filler ability was 65$\pm$5cm, V load flow speed ranged from 0.5 to 1.5.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1055-1062
• /
• 2023

Globally, the need for remanufacturing or reusing ships and various mechanical parts continues to increase due to environmental problems including global warming. Research on remanufacturing is being carried out in many areas. However, research on inspection and classification to identify the performance or degree of wear of mechanical parts is insufficient. In particular, studies on the inspection-ability and classification-ability of mechanical parts equipped with various materials and complex forms are highly required. Remanufacturing must be considered from the stage of design to extend the life cycle of mechanical parts. Particularly, it is very important to perform research for evaluating the degree of ease to inspect and classify various sorts of wear or deterioration of parts caused by long-term use easily. In this study, the degree of ease in inspecting or classifying mechanical parts for remanufacturing is defined as inspection-ability and classification-ability. In fact, to remanufacture old parts, inspection-ability and classification-ability should be reflected from the stage of design. The purpose of this study is to evaluate the inspection-ability and classification-ability of ships and various mechanical parts. This researcher has presented the quantitative evaluation procedure of inspection-ability and classification-ability, derived the factors and ranges that influence each of the details of easiness, assigned scores according to the ranges of the factors, and calculated weights. Lastly, this study presents the procedure of scoring to evaluate the overall weights of inspection-ability and classification-ability and also inspection-ability and classification-ability quantitatively.

• 수산해양교육연구
• /
• 제26권2호
• /
• pp.284-295
• /
• 2014

The purpose of the study was to validate the components of practical collaborative competencies by analyzing the perceptions of corporate personnel on practical collaborative competencies. The study reviewed the theories of collaborative intelligence, collective intelligence, cooperative learning, and learning communities. Based on the results of the literature review, the study derived seven categories of participative motivation for group activities, ability to share thinking and consciousness, motivation to share experiences, ability to control emotion, ability to promote interaction, creativity, and collaborative performance as the core competencies. To validate the elements, survey was conducted for 186 corporate personnels. The results showed that the personnels perceived the following elements as important collaborative competencies: participative motivation for group activities, motivation to form participatory atmosphere, ability to manage conflict effectively, ability to form relationships, ability to form positive team atmosphere.

• PNF and Movement
• /
• 제13권4호
• /
• pp.203-213
• /
• 2015

Purpose: Deficits in lower-extremity function and trunk control ability have a negative impact on individuals with hemiplegia. This case report aimed to describe the effect of trunk stability exercises using proprioceptive neuromuscular facilitation (PNF) on trunk control ability, balance, and gait in a patient with hemiplegia. Methods: A 77-year-old man with hemiplegia and trunk and lower extremity impairment participated in this four-week training intervention. Results: The patient demonstrated improvements in trunk control ability, balance, and gait performance. Outcome measures (Fugl-Meyer Assessment Lower Extremity (FMA-LE), Trunk Control Test, Berg Balance Scale, Timed Up and Go test, 10 Meter Walk test) were measured before and after the training program. Conclusion: The results of this case suggest that a trunk stability exercise using a PNF program may improve trunk control ability, balance, and gait in a patient with hemiplegia.

• 디지털융복합연구
• /
• 제14권11호
• /
• pp.333-345
• /
• 2016

이 연구의 목적은 간호사의 DISC성격유형, 자기효능감, 임상수행능력사이의 관계를 규명하기 위함이다. 자료는 K시의 5개 병원에 근무하는 302명의 간호사로부터 수집하였다. 기술통계, t-test, ANOVA, 피어슨 상관관계 분석을 이용하여 분석하였다. 자기효능감과 임상수행능력은 D형이 I형과 S형보다 더 높음을 나타냈다. 임상수행능력의 하위 영역에서는 간호과정, 간호기술, 전문직발전에서 D유형이 S유형보다 높았고, 자기효능감에서도 D유형이 I유형과 S유형보다 높았다. DISC 유형별 자기효능감과 임상수행능력은 I 유형 (r = .66, p<.01), S 유형 (r = .60, p<. 01), D유형(r =.56, p<.01), C 유형 (r = .52, p<.01)으로 양의 상관관계를 나타냈다. D유형에서 대인관계/의사소통이 가장 낮은 상관관계를 보였으며, I유형과 S유형에서는 교육/협력관계가 가장 낮았다. C유형에서는 간호기술이 가장 높고, 간호과정이 가장 낮았다. 본 연구결과를 특성별 교육 프로그램이나 간호사 부서 배치에 활용한다면 효과적인 업무수행 결과를 가져올 수 있으리라 사료된다.