• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.113-116
• /
• 2004

We developed internal and external type sensor to measure ultra-high frequency (UHF) partial discharge (PD) in 170 kV gas-insulated switchgears (GIS). We also manufactured a PD-generator to verify and measure the detection sensitivity of those sensors. We measured the output power of the UHF PD sensors induced by PDs of 5 pC using the PD-generator. We measured UHF propagation loss of an 170 kV GIS for optimal arrangement of the sensors. We used swept UHF signal from a network analyzer into the GIS to measure the loss of various components of the GIS.

• Journal of Sensor Science and Technology
• /
• v.24 no.5
• /
• pp.353-357
• /
• 2015

A new SPICE-compatible model for a gate/body-tied PMOSFET photodetector (GBT PD) with an overlapping control gate is presented. The proposed SPICE-compatible model of a GBT PD with an overlapping control gate makes it possible to control the photocurrent. Research into GBT PD modeling was proposed previously. However, the analysis and simulation of GBT PDs is not lacking. This SPICE model concurs with the measurement results, and it is simpler than previous models. The general GBT PD model is a hybrid device composed of a MOSFET, a lateral bipolar junction transistor (BJT), and a vertical BJT. Conventional SPICE models are based on complete depletion approximation, which is more applicable to reverse-biased p-n junctions; therefore, they are not appropriate for simulating circuits that are implemented with a GBT PD with an overlapping control gate. The GBT PD with an overlapping control gate can control the sensitivity of the photodetector. The proposed sensor is fabricated using a $0.35{\mu}m$ two-poly, four-metal standard complementary MOS (CMOS) process, and its characteristics are evaluated.

• Journal of Chest Surgery
• /
• v.27 no.5
• /
• pp.413-417
• /
• 1994

Adenoid cystic carcinoma usually grows in the trachea or near its bifurcation and causes obstruction of the air way. We recently experienced a 33 year-old male patient who had adenoid cystic carcinoma in the left main bronchus with the chief complaint of productive cough. On the bronchoscopy, the mass obstructed the left main bronchus completely and had nodularity and increased vascularity.The trachea was shifted to the left side and the lower lobe of the left lung was atelectatic on chest X-ray and computed axial tomogram.He underwent left tracheal sleeve pneumonectomy and lymph node dissection through bilateral thoracotomy. At first,we attempted left tracheal sleeve pneumonectomy through the left thoracotomy,however, it was very difficult to perform carinoplastic procedure after sleeve resection of 2.5cm of distal trachea and 1cm of proximal right main bronchus including whole left lung because of poor operative field and difficulty in the anastomosis of the right main bronchus to the distal end of the trachea without tension.Therefore after radical resection of the left lung we made right thoracotomy,through which we could anastomosed the distal trachea and right main bronchus with 4-0 PDS interrupted suture after mobilization of the right hilum without difficulty. The tumor was confirmed to be adenoid cystic carcinoma with metastasis to subcarinal lymph node histopathologically. Postoperative course was uneventful but he needed two bronchoscopic procedure to clear distal airway of the retained bronchial secretion. He was discharged at 14 days after operation with complete recovery.

• Journal of Microbiology
• /
• v.43 no.4
• /
• pp.361-365
• /
• 2005

In this study, we chronicle the establishment of a novel transformation system for the unicellular marine green alga, Dunaliella salina. We introduced the CaMV35S promoter-GUS construct into D. salina with a PDS1000/He micro-particle bombardment system. Forty eight h after transformation, via histochemical staining, we observed the transient expression of GUS in D. salina cells which had been bombarded under rupture-disc pressures of 450 psi and 900 psi. We observed no GUS activity in either the negative or the blank controls. Our findings indicated that the micro-particle bombardment method constituted a feasible approach to the genetic transformation of D. salina. We also conducted tests of the cells' sensitivity to seven antibiotics and one herbicide, and our results suggested that 20 ${\mu}g$/ ml of Basta could inhibit cell growth completely. The bar gene, which encodes for phosphinothricin acetyltransferase and confers herbicide tolerance, was introduced into the cells via the above established method. The results of PCR and PCR-Southern blot analyses indicated that the gene was successfully integrated into the genome of the transformants.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.345-349
• /
• 2007

We wished to create a set of small molecular weight PDZ domain ligands that may be used in functional studies on the proteins AF6, PSD-95 and Shank. As a starting point, the Shank3 PDZ domain was cloned, purified, and characterized the structure of Shank3 PDZ domain by 1D $^1H-NMR$. The chemical shift dispersion of the proton signals indicates that the purified Shank3 PDZ protein is very pure and globally well folded. Currently, we are working on improving the yield of the protein production for complete NMR structural analysis of the Shank3 PDZ domain.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.347-352
• /
• 2010

In this study, we addressed a novel nanosized curdlan-silica complex, which is curdlan bound to silica, for the development of a sustain-releasing micro element fertilizer formulation. The complex was obtained as follow steps; First, Curdlan polymer, sodium silicate ($Na_2SiO_3$) and isopropyl alcohol were dissolved in DDW. Next the resultant solution was irradiated by $^{60}Co$ gamma-irradiator (150 TBq of capacity; ACEL, Canada). Then $MgSO_4$ was treated with the resultant solution. The obtained colloidal solution was dried by freeze dryer. Finally, we obtained a novel nanosized curdlan-silica formulation containing $MgSO_4$ from the colloidal solution. The morphology of the complex was characterized by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The nanosized curdlan-silica complex has a particle size ranging from 20 to 80 nm and high stability. Our results suggested that the nano-complex can be applicable to use in various sustain-releasing formulation for pesticide delivery system (PDS).

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3058-3067
• /
• 2021

Sodium zinc borate glasses doped with dysprosium and modified with different concentrations of barium oxide (0-50 mol %) were fabricated using the melting quenching technique. The structural properties of the prepared glass systems were characterized using XRD and FTIR methods. The absorption spectra of the prepared glasses were measured to determine their energy gap and their related optical properties. The density of the glasses and other physical parameters were also reported. Additionally, with the help of Photon Shielding and Dosimetry (PSD) software, we investigated the radiation shielding parameters of the prepared glass systems at different energy values. It was found that an increase in the density of the glasses by increasing the concentration of BaO significantly improved the gamma ray shielding ability of the samples. For practical results, a compatible irradiation set up was designed to check the shielding capability of the obtained glasses using a gamma ray source at 662 keV. The experimentally obtained results strongly agreed with the data obtained by PDS software at the same energy. These results demonstrated that the investigated glass system is a good candidate for several radiation shielding applications when comparing it with other commercial shielding glasses and concretes.

• Journal of Society of Preventive Korean Medicine
• /
• v.22 no.3
• /
• pp.11-19
• /
• 2018

Objectives : The aim of this study is to investigate the current research trend of herbal medicine based on the published articles in pharmacoepidemiologic journals. Methods : A total of 3 electronic journals, Pharmacoepidemiology and Drug Safety(PDS), Drug Safety and Journal of Pharmacoepidemiology and Risk Management(JPERM) from January 2013 to August 2018 were used for searching articles about herbal medicine. Selected articles were reviewed and classified under 5 categories-collection of adverse events in herbal medicine, statistical modeling and methodology, pharmaco-epidemiologic outcome study, drug utilization review(DUR), risk management system and regulation. Results : A total of 8 articles were finally included for analysis. 2 articles were categorized in collection of adverse events in herbal medicine, 1 was statistical modeling and methodology, 2 were pharmacoepidemiologic outcome study and 3 were risk management system and regulation. There was no article in DUR. And then pharmacoepidemiologic research trends of herbal medicine were summarized in classification of 5 categories. Conclusions : To sum up with these 8 articles of herbal medicine in pharmacoepidemiologic journals, herbal medicine was of interesting concern among researchers. The need for research on safety and risk management of herbal medicine is steadily increasing, pharmacoepidemiologic research about herbal medicine must be activated in Korea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.204-214
• /
• 2019

A CAD program has recently been introduced that can be directly developed into a three-dimensional human body shape and made into a pattern. It is possible to fabricate a bra that reflects the volume and surface area of the breast; however, it still needs to be verified. This study investigates the average size and shape of 20 big-breasted women and designs a brassiere pattern for women with large breasts using a 3D Flattening function of OptiTex PDS v15.6. In addition, the study verifies the reliability of the proposed method compared to a conventional brassiere pattern. The study results are as follows. First, the three dimensional measurement values were smaller than the direct measurement dimensions when the three dimension measurement dimensions of the subjects were compared with the direct measurement dimensions, the replica measurement dimensions and the three dimensional measurement dimensions. Second, the 3D flattening pattern reflects the actual shape, length, and area of the actual breast when comparing a brassiere pattern using a 3D shape and pattern reflecting the direct measurement.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.188-203
• /
• 2021

The specific benefits of the modified films formed on preliminary anodized aluminum, including the versatility of their potential applications impose the need for evaluation of the exploitation reliability of these films. In this aspect, the durability of Cu and Ni modified anodized aluminum oxide (AAO) films on the low-doped AA1050 alloy was assessed through extended exposure to a 3.5% NaCl model corrosive medium. The electrochemical measurements by means of electrochemical impedance spectroscopy (EIS) and potentiodynamic scanning (PDS) after 24 and 720 hours of exposure have revealed that the obtained films do not change their obvious barrier properties. In addition, supplemental analyses of the coatings were performed, in order to elucidate the impact of the AC-deposition of Cu and Ni inside the pores. The scanning electron microscopy (SEM) images have shown that the surface topology is not affected and resembles the typical surface of an etched metal. The subsequent energy dispersive X-ray spectroscopy (EDX) tests have revealed a predominance of Cu in the combined AAO-Cu/Ni layers, whereas additional X-ray photoelectron (XPS) analyses showed that both metals form oxides with different oxidation states due to alterations in the deposition conditions, promoted by the application of AC-polarization of the samples.