• 제목/요약/키워드: Pd-based Catalyst

검색결과 49건 처리시간 0.029초

메조포러스 분자체에 담지된 Pt/Pd 촉매상에서 납사분해 잔사유의 방향족 화합물 수소화 특성 (Hydrogenation Characteristics of Aromatics in Residue Oil of Naphtha Cracking on Pt/Pd Impregnated Mesoporous Molecular Sieve)

  • 최종화;정순용;오성근
    • Korean Chemical Engineering Research
    • /
    • 제43권6호
    • /
    • pp.675-682
    • /
    • 2005
  • 불화실리콘산($H_2SiF_6$)과 질산알루미늄의 혼합 수용액을 주형으로 사용되는 $C_{16}TMABr$(cethyltrimethylaminonium bromide)용액에 첨가하여 불화실리콘산의 hydrolysis 반응에 의해서 메조포러스 분자체(Al-MMS)를 합성하였다. 합성된 분자체를 분석한 결과 비표면적이 $981m^2/g$이고, 기공 크기가 $39{\AA}$ 부근에서 균일함을 보이는 메조포러스 분자체가 합성되었으며, $NH_3$-TPD 결과 산의 세기가 크지 않음을 알 수 있었다. 합성된 담체가 납사분해 잔사유에 포함되어 있는 방향족 화합물의 수소화 반응에 대한 촉매 담체로써 적용 가능한가를 조사하기 위해서 Pt 및 Pd의 금속 성분을 담지시킨 후, 납사 분해 잔사유에 많이 포함되어 있는 방향족 화합물인 나프탈렌을 모델화합물로 정하고 나프탈렌의 수소화 반응에 대한 온도별 전환율, 반응속도 상수, 활성화 에너지를 조사하였다. 또한, 다른 메조포러스 담체와 상용담체를 이용하여 촉매를 제조한 후 같은 방법으로 비교하였다. 그 결과 PtPd/Al-MMS 촉매가 우수한 탈방향족 활성과 황저항성을 나타내었으며, 다른 메조포러스 담체 및 상용 담체와 비교한 결과 활성이 우수하게 나타났다. 실제 납사분해 잔사유의 일종인 PGO(pyrolized gas oil)를 원료로 실험해 본 결과 활성이 우수하게 나타났으며 Pd/Al-MMS 촉매는 납사분해 잔사유에 포함된 방향족 화합물의 수소화 촉매로써 응용 가능성을 보였다.

Enhanced Hydrogen Production from Methanol/Water Photo-Splitting in TiO2 Including Pd Component

  • Kwak, Byeong-Sub;Chae, Jin-Ho;Kim, Ji-Yeon;Kang, Mi-Sook
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권5호
    • /
    • pp.1047-1053
    • /
    • 2009
  • The future use of hydrogen as an energy source is expected to increase on account of its environmentally friendliness. In order to enhance the production of hydrogen, Pd ions (0.01, 0.05, 0.1, and 0.5 mol%) were incorporated $TiO_2$ (Pd-$TiO_2$) and used as a photocatalyst. The UV-visible absorbance decreased with increasing level of palladium incorporation without a wavelength shift. Although all the absorption plots showed excitation characteristics, there was an asymmetric tail observed towards a higher wavelength caused by scattering. However, the intensity of the photoluminescence (PL) curves of Pd-$TiO_2$ was smaller, with the smallest case being observed at 0.1 and 0.5 mol% Pd-$TiO_2$, which was attributedto recombination between the excited electrons and holes. Based on these optical characteristics, the evolution of $H_2$ from methanol/water (1:1) photo-splitting over Pd-$TiO_2$ in the liquid system was enhanced, compared with that over pure $TiO_2$. In particular, 2.4 mL of $H_2$ gas was produced after 8 h when 0.5 g of a 1.0 mol% Pd-$TiO_2$ catalyst was used. $H_2$ was stably evolved even after 28 h without catalytic deactivation, and the amount of $H_2$ produced reached 14.5 mL after 28 h. This is in contrast to the case of the Pd 0.1 mol% impregnated $TiO_2$ of $H_2$ evolution of 17.5 mL due to the more decreasedelectron-hole recombination.

AlGaN/GaN-on-Si 이종접합 기반의 고감도 수소센서 (High Sensitivity Hydrogen Sensor Based on AlGaN/GaN-on-Si Heterostructure)

  • 최준행;조민기;김형탁;이호경;차호영
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제5권1호
    • /
    • pp.39-43
    • /
    • 2019
  • 에너지 고갈 문제에 대한 대처 방안으로 수소에너지는 직간접적인 긍정적 효과를 가져온 반면, 사용시 안정성이 매우 중요한 사항이기 때문에 수소가스에 대한 정확하고 빠른 감지를 가능하게 하는 센서 기술이 요구된다. 본 연구에서는 AlGaN/GaN 이종접합 반도체 플렛폼을 활용하여 Pd 촉매 기반의 수소센서를 개발하였으며 감도를 높이기 위하여 식각 구조를 도입하였다. 온도 및 바이어스 전압이 센서의 반응도에 미치는 영향을 수소가스 위험도 최하한선 농도인 4% 수소 농도에 노출된 경우에 대하여 세심하게 분석하였다. AlGaN/GaN 이종접합의 우수한 특성에 식각 구조가 도입된 결과 56%의 높은 반응도와 0.75 초의 빠른 응답 속도 성능을 달성하였다.

팔라듐 옥사이드 나노구조물의 성장에서 기판 온도와 성장 시간의 효과 (Effect of Substrate Temperature and Growth Duration on Palladium Oxide Nanostructures)

  • 김종일;김기출
    • 한국산학기술학회논문지
    • /
    • 제20권4호
    • /
    • pp.458-463
    • /
    • 2019
  • 팔라듐 (Pd)은 촉매 또는 유해 가스 감지물질로서 널리 활용되고 있다. 특히 자체 부피의 900배까지 수소를 흡착할 수 있는 특성 때문에 수소가스 센서로서의 다양한 연구가 이루어졌다. 본 연구에서는 팔라듐 옥사이드 (PdO) 나노구조물을 실리콘 기판 ($SiO_2(300nm)/Si$) 위에 열화학기상증착 장비를 이용하여 $230^{\circ}C{\sim}440^{\circ}C$ 영역에서 3시간 ~ 5시간 동안 성장시켰다. 원료물질인 Pd 파우더는 $950^{\circ}C$에서 기상화시켰고, 이송가스인 고순도 아르곤 가스를 200 sccm으로 흘려주었다. 성장된 팔라듐 옥사이드 나노구조물의 형상을 전계방출 주사전자현미경으로 조사하였고, 결정학적 특성을 Raman 분광학으로 분석하였다. 그 결과 성장된 나노구조물은 PdO 상을 가지고 있었으며, 특정한 기판 온도와 성장 시간에서 나노큐브 형태의 PdO 나노구조물이 성장되었다. 특히 5시간 동안 성장된 $370^{\circ}C$ 영역에서 균일한 형태의 나노큐브 PdO 나노구조물이 성장되었다. 이러한 PdO 나노큐브는 기상-액상-고상 공정으로 성장된 것으로 판단되며, 그래핀 위에 성장되는 PdO 나노큐브 구조는 고감도 수소가스 감지 센서로 활용될 수 있을 것으로 기대된다.

오존/촉매 산화공정에서 금속담지 활성탄을 이용한 페놀의 분해 특성 (Removal Characteristics of Phenol at Advanced Oxidation Process with Ozone/Activated Carbon Impregnated Metals)

  • 최재원;윤지영;박진도;이학성
    • 공업화학
    • /
    • 제23권3호
    • /
    • pp.302-307
    • /
    • 2012
  • 오존/활성탄 공정 및 오존/촉매 공정과 같은 고급산화공정을 사용하여 페놀의 분해를 비교하였다. 촉매는 조립 활성탄에 팔라듐(Pd/AC), 망간(Mn/AC), 코발트(Co/AC) 및 철(Fe/AC)을 담지하여 제조하였다. 1 h 동안의 반응결과, 포화 오존농도(1.48 mg/L)에서 용존 오존의 분해율은 Mn/AC (45%) > Pd/AC (42%) > Co/AC (33%) > AC (31%) > Fe/AC (27%)의 순서로 감소하였으며, 페놀의 제거효율은 Mn/AC (89%) > Pd/AC (85%) > Co/AC (77%) > AC (76%) > Fe/AC (71%)의 순서로 감소하였다. 총유기탄소(TOC)의 잔존 비율(C/Co)은 Pd/AC (0.29) < Mn/AC (0.36) < AC (0.40) < Co/AC (0.49) < Fe/AC (0.51)의 순서로 증가하였다. Co/AC 및 Fe/AC 공정은 오존/활성탄 공정과 비교하여 촉매효과가 거의 없었다. 또한 페놀이 분해되면서 생성되는 중간물질인 하이드로퀴논과 카테콜의 최대 농도는 Mn/AC > AC > Co/AC > Fe/AC > Pd/AC 공정의 순서로 감소하였으며, Pd/AC 공정의 경우, 1 h 동안 반응 후, 이러한 중간물질들이 검출되지 않았다.

목질폐재(木質廢材)의 열(熱)-화학적(化學的) 탈(脫)산소-수소첨가반응(환원반응)에 의한 액화(液化)탄화수소의 합성 (II) (Hydrocarbon Synthesis of Waste Lignocellulosics by Liquefaction Reaction of Thermochemical Deoxyhdrogenolysis Method (II))

  • 이병근
    • Journal of the Korean Wood Science and Technology
    • /
    • 제19권4호
    • /
    • pp.80-84
    • /
    • 1991
  • Lignocellulosic biomass including acetosolv ricestraw and spruce lignin were liquefied and converted into liquid hydrocarbons by catalytic hydroliquefaction reaction. These experimental works were carried out in 1-liter-capacity autoclave using 50% tetralin and m-cresol solution respectively as soluble solvent and Ni. Pd. Fe and red mud as catalyst. $H_2$ gas was supplied into the reactor for escaltion of deoxhydroenolysis reaction. Catalyst concentrations were 1 % of raw material based on weight. The ratio between raw materials and soluble solvent are 1g and 10cc. The reaction conditions are 400-$700^{\circ}C$ of reaction temperature, 10-50 atms of reaction pressure. The highest yield of hydrocarbon, so called "product oil" showed 32% and 5.5% of lowest char formation when red mud was used as catalyst. The product oil yields from those of other catalysts were in the range of 20-29%. The influence of different initial hydrogen pressures was examined in the range d 30-50 atms. A minimum pressure of 35 atms was necessary to obtain a complete recovery of souble solvent for recycling.

  • PDF

유해가스 차단시스템용 MEMS 가스 센서 (MEMS based on nanoparticle gas sensor for air quality system)

  • 이의복;박영욱;황인성;김선중;차정호;이호준;이종흔;주병권
    • 전기전자학회논문지
    • /
    • 제13권4호
    • /
    • pp.37-42
    • /
    • 2009
  • 본 연구에서는 졸겔법으로 ZnO, 수열합성법으로 $SnO_2$ 나노분말을 제조하고 이들 나노분말에 Pd, Ru 등의 촉매를 첨가하였다. MEMS 기술로 제작된 히터 및 전극 구조 위에 나노 감지 분말을 도포하여 CO and $NO_2$ 가스 센서를 제작하였다. 0.1 wt% Pd 도핑된 $SnO_2$ 가스센서와 Ru 도핑된 ZnO 가스 센서는 각각 CO 30 ppm, $NO_2$ 1 ppm의 낮은 농도에서도 높은 감지 특성을 보였다.

  • PDF

Study of the Optimal Calcination Temperature of an Al/Co/Ni Mixed Metal Oxide as a DeNOx Catalyst for LNT

  • Jang, Kil Nam;Han, Kwang Seon;Hong, Ji Sook;You, Young-Woo;Suh, Jeong Kwon;Hwang, Taek Sung
    • 청정기술
    • /
    • 제21권3호
    • /
    • pp.184-190
    • /
    • 2015
  • 대부분의 LNT 촉매는 낮은 온도 영역에서의 NOx 산화를 위하여 Pt와 같은 귀금속류를 사용하는 것은 경제적인 부담을 가지고 있다. 따라서, 본 연구는 이러한 문제를 해결하기 위하여 시도되었다. 즉, Pt, Pd, Rh 등과 같은 귀금속류(platinum group metal, PGM)를 사용하지 않는 LNT (lean NOx trap)용 DeNOx 촉매를 개발하기 위해 시도하였다. 이를 위해서 예비실험을 통해 Pt등 귀금속류등의 PGM (platinum group metal)을 사용하지 않는 Al/Co/Ni 혼합 금속 산화물을 선정하였다. 궁극적으로는, 선정된 촉매의 소성온도에 따른 물리화학적 특성 변화가 NOx 전환율에 미치는 영향을 살펴보고자 하였다. 이들의 물리화학적인 성질을 평가하기 위해 XRD, EDS, SEM, BET 분석을 실시하였다. 이러한 평가를 실시한 결과, 모든 소성온도에서 혼합금속 산화물은 Co2AlO4 및 NiAl2O4의 스피넬 구조가 혼재되어 있는 것으로 나타났고, NOx 기체들의 산화-환원 반응이 이루어지기에는 충분한 기공부피와 기공크기를 갖고 있음을 알 수 있었다. 그러나 NH3-TPD 분석 결과에서는 소성온도가 700 ℃ 이하를 유지해야 하는 것으로 판단되었다. 더욱이 ramp test를 통해서는 NO 및 NOx 전환율을 동시에 만족할 수 있는 시료는 소성온도는 500 ℃에서 처리된 경우임을 알 수 있었다. 이러한 결과 등을 바탕으로, Al/Co/Ni=1.0/2.5/0.3 혼합 금속 산화물의 최적 소성온도는 500 ℃임을 알 수 있었다.

Pt 기반 이원계 나노입자의 산소 및 일산화탄소 흡착 특성에 대한 전자밀도함수이론 연구 (Density Functional Theory Study of Separated Adsorption of O2 and CO on Pt@X(X = Pd, Ru, Rh, Au, or Ag) Bimetallic Nanoparticles)

  • 안혜성;하현우;유미;최혁;김현유
    • 한국재료학회지
    • /
    • 제28권6호
    • /
    • pp.365-369
    • /
    • 2018
  • We perform density functional theory calculations to study the CO and $O_2$ adsorption chemistry of Pt@X core@shell bimetallic nanoparticles (X = Pd, Rh, Ru, Au, or Ag). To prevent CO-poisoning of Pt nanoparticles, we introduce a Pt@X core-shell nanoparticle model that is composed of exposed surface sites of Pt and facets of X alloying element. We find that Pt@Pd, Pt@Rh, Pt@Ru, and Pt@Ag nanoparticles spatially bind CO and $O_2$, separately, on Pt and X, respectively. Particularly, Pt@Ag nanoparticles show the most well-balanced CO and $O_2$ binding energy values, which are required for facile CO oxidation. On the other hand, the $O_2$ binding energies of Pt@Pd, Pt@Ru, and Pt@Rh nanoparticles are too strong to catalyze further CO oxidation because of the strong oxygen affinity of Pd, Ru, and Rh. The Au shell of Pt@Au nanoparticles preferentially bond CO rather than $O_2$. From a catalysis design perspective, we believe that Pt@Ag is a better-performing Pt-based CO-tolerant CO oxidation catalyst.

Ni 박막 위 20 nm급 고정렬 Pt 크로스-바 구조물의 형성 방법 (Pattern Formation of Highly Ordered Sub-20 nm Pt Cross-Bar on Ni Thin Film)

  • 박태완;정현성;조영래;이정우;박운익
    • 대한금속재료학회지
    • /
    • 제56권12호
    • /
    • pp.910-914
    • /
    • 2018
  • Since catalyst technology is one of the promising technologies to improve the working performance of next generation energy and electronic devices, many efforts have been made to develop various catalysts with high efficiency at a low cost. However, there are remaining challenges to be resolved in order to use the suggested catalytic materials, such as platinum (Pt), gold (Au), and palladium (Pd), due to their poor cost-effectiveness for device applications. In this study, to overcome these challenges, we suggest a useful method to increase the surface area of a noble metal catalyst material, resulting in a reduction of the total amount of catalyst usage. By employing block copolymer (BCP) self-assembly and nano-transfer printing (n-TP) processes, we successfully fabricated sub-20 nm Pt line and cross-bar patterns. Furthermore, we obtained a highly ordered Pt cross-bar pattern on a Ni thin film and a Pt-embedded Ni thin film, which can be used as hetero hybrid alloy catalyst structure. For a detailed analysis of the hybrid catalytic material, we used scanning electron microscope (SEM), transmission electron microscope (TEM) and energy-dispersive X-ray spectroscopy (EDS), which revealed a well-defined nanoporous Pt nanostructure on the Ni thin film. Based on these results, we expect that the successful hybridization of various catalytic nanostructures can be extended to other material systems and devices in the near future.