• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2005년도 국제표면실장및인쇄회로기판생산기자재전 전자패키지 기술세미나
• /
• pp.59-71
• /
• 2005

• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.25-31
• /
• 2015

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.61-67
• /
• 2005

Since lead (Pb)-free solders for electronics have higher melting points than that of eutectic Sn-Pb solder, they need higher soldering temperatures. In order to decrease the soldering temperature we tried to coat Sn-Bi layer on $Sn-3.5\%Ag$ solder by electroplating, which applies the mechanism of transient liquid phase bonding to soldering. During heating Bi will diffuse into the $Sn-3.5\%Ag$ solder and this results in decreasing soldering temperature. As bonding samples, the 1608 capacitor electroplated with Sn, and PCB, its surface was finished with electroless-plated Ni/Au, were selected. The $Sn-95.7\%Bi$ coated Sn-3.5Ag was supplied as a solder between the capacitor and PCB land. The samples were reflowed at $220^{\circ}C$, which was lower than that of normal reflow temperature, $240\~250^{\circ}C$, for the Pb-free. As experimental result, the joint of $Sn-95.7\%Bi$ coated Sn-3.5Ag showed high shear strength. In the as-reflowed state, the shear strength of the coated solder showed 58.8N, whereas those of commercial ones were 37.2N (Sn-37Pb), 31.4N (Sn-3Ag-0.5Cu), and 40.2N (Sn-8Zn-3Bi). After thermal shock of 1000 cycles between $-40^{\circ}C$ and $+125^{\circ}C$, shear strength of the coated solder showed 56.8N, whereas the previous commercial solders were in the range of 32.3N and 45.1N. As the microstructures, in the solder $Ag_3Sn$ intermetallic compound (IMC), and along the bonded interface $Ni_3Sn_4$ IMC were observed.

• 대한기계학회논문집A
• /
• 제39권5호
• /
• pp.467-471
• /
• 2015

최근까지, 전자제품에 사용되는 솔더는 납성분이 남아 있으며, 전자부품 및 시스템의 무연 (Pb-free) 솔더에 대한 관심은 반도체 및 전자산업에서 증가하고 있다. 본 논문에서 사용된 솔더접합부는 Sn-37Pb, Sn-4Ag 및 Sn-4Ag-0.5Cu/Ni 기판 이다. 인공시효처리는 $150^{\circ}C$에서 각각 0hr, 100hr, 200hr, 400hr, 600hr 그리고 1000hr 동안 수행되었으며, SP 시험을 이용해 $30^{\circ}C$와 $50^{\circ}C$에서 접합강도를 평가했다. 전단강도는 인공시효시간과 온도가 증가함에 따라 전반적으로 감소하였다. 무연솔더는 Sn-37Pb 보다 총파괴 에너지가 높았으며, Sn-4Ag-0.5Cu/Ni 접합부는 고온에서 기계적 물성치가 가장 우수하였다.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.37-42
• /
• 2001

지금 까지 전자패키지 접합에 사용되어온 Sn/37Pb 솔더는 낮은 용융온도와 우수한 물리적 특성, 그리고 저렴한 가격 등으로 널리 사용되었다. 그러나 납의 독성으로 인한 환경문제와 인체 유해성이 문제화되면서 이를 대체할 무연솔더의 요구가 시급한 실정이다. 또한 제품의 소형화에 따른 접합부의 미세화로 인한 접합부신뢰성이 요구되고 있다. 본 연구에서는 현재 Sn/37Pb 솔더를 사용하여 제품에 사용되고 있는 48 $\mu$BGA 패키지를 사용하여 Sn/Ag 계열 의 두 무연솔더인 Sn/3.5Ag/0.75Cu와 Sn/2.0Ag/0.5Cu/2.0Bi를 접합하여 장기신뢰성을 시효처리를 통하여 제시하였다. 시효처리는 $130^{\circ}C$, $150^{\circ}C$, $170^{\circ}C$ 온도에서 각각 300, 600, 900 시간동안 하였으며, 시효처리에 따른 전단강도와 각 솔더의 활성화에너지를 구하여 Sn/37Pb 솔더와 비교하였다. 두 무연솔더의 시효강도는 Sn/37Pb 솔더 보다 우수하였으며, 시효처리에 따라 형성된 솔더내부의 금속간화합물의 형상으로부터 균열의 성장과 형성에 대하여 논하였다. 이런 실험결과들로부터 두 무연솔더의 장기신뢰성 측면에서 대체가능성을 제시하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1998년도 특별강연 및 춘계학술발표 개요집
• /
• pp.157-158
• /
• 1998

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.75.1-75
• /
• 2000

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.49-49
• /
• 2004

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.211-213
• /
• 1999

In the future, restrictions are likely to be imposed on the use of lead in the electronics industry. In dealing with such a move, we have been developing Pb-free Sn-Ag plating process to replace presently available Sn-Pb process. In this paper, the result of a basic comparison test between Sn-Pb plating and Sn-Ag plating is reported.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.79-92
• /
• 2004

RoHS compliant products are now being mass-produced. Eco-product(Pb-free+RoHS compliant+Halogen-free) will be possible from 2005. Pb-free flip chip will be qualified by 2004. 4Q. Lead Finish: SnBi-Under mass production Pd PPF-Under small production Matte Sn-will be internally qualified by 2004. 4Q Development of Pb-free Solder Ball: Stable Supply, Cost Down.