• Environmental Analysis Health and Toxicology
• /
• 제23권4호
• /
• pp.231-245
• /
• 2008

Various methods for detecting changes in response behaviors of indicator specimens are presented for monitoring effects of toxic treatments. The movement patterns of individuals are quantitatively characterized by statistical (i.e., ANOVA, multivariate analysis) and computational (i.e., fractal dimension, Fourier transform) methods. Extraction of information in complex behavioral data is further illustrated by techniques in ecological informatics. Multi-Layer Perceptron and Self-Organizing Map are applied for detection and patterning of response behaviors of indicator specimens. The recent techniques of Wavelet analysis and line detection by Recurrent Self-Organizing Map are additionally discussed as an efficient tool for checking time-series movement data. Behavioral monitoring could be established as new methodology in integrative ecological assessment, tilling the gap between large-scale (e.g., community structure) and small-scale (e.g., molecular response) measurements.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.95-102
• /
• 2014

Light trapping techniques can change the propagation direction of incident light and keep the light longer in the absorption layers of solar cells to enhance the power conversion efficiency. In thin film silicon (Si) solar cells, the thickness of absorption layer is generally not enough to absorb entire available photons because of short carrier life time, and light induced degradation effect, which can be compensated by the light trapping techniques. These techniques have been adopted as textured transparent conduction oxide (TCO) layers randomly or periodically textured, intermediate reflection layers of tandem and triple junction, and glass substrates etched by various patterning methods. We reviewed the light trapping techniques for thin film Si solar cells and mainly focused on the commercially available techniques applicable to textured TCO on patterned glass substrates. We described the characterization methods representing the light trapping effects, texturing of TCO and showed the results of multi-scale textured TCO on etched glass substrates. These methods can be used tandem and triple thin film Si solar cells to enhance photo-current and power conversion efficiency of long term stability.

• BMB Reports
• /
• 제53권8호
• /
• pp.393-399
• /
• 2020

Recent advancements in the resolution and throughput of single-cell analyses, including single-cell RNA sequencing (scRNA-seq), have achieved significant progress in biomedical research in the last decade. These techniques have been used to understand cellular heterogeneity by identifying many rare and novel cell types and characterizing subpopulations of cells that make up organs and tissues. Analysis across various datasets can elucidate temporal patterning in gene expression and developmental cues and is also employed to examine the response of cells to acute injury, damage, or disruption. Specifically, scRNA-seq and spatially resolved transcriptomics have been used to describe the identity of novel or rare cell subpopulations and transcriptional variations that are related to normal and pathological conditions in mammalian models and human tissues. These applications have critically contributed to advance basic cardiovascular research in the past decade by identifying novel cell types implicated in development and disease. In this review, we describe current scRNA-seq technologies and how current scRNA-seq and spatial transcriptomic (ST) techniques have advanced our understanding of cardiovascular development and disease.

• 한국의류학회지
• /
• 제35권3호
• /
• pp.359-370
• /
• 2011

This study analyzes the textiles design of natural indigo dyed products in Korea and Japan. In this study, a total of 556 Korean natural indigo dyed products, and 2,730 Japanese natural indigo dyed products were used for analysis. The subjects of this study were 556 natural indigo dyed products and 2,730 Japanese natural indigo dyed products selling natural indigo dyed products which were found using search engine keywords of natural indigo dyeing and natural dyeing. Research and analysis was treated regarding the products, items, patterns, and the representation techniques of the patterns. The results of this study are as follows. In the pattern used for natural indigo dyed products, 71.4% of Korean products have no pattern, but 77.1% of Japanese products have patterns. On the representation techniques of the patterns, Korean products used tie-dyeing and a dip patterned fabric. While in the Japanese products, the most frequent patterning techniques were paraffin dye, followed by tie-dyeing, yarn-dyed and weaving, screen printing, and yarn-dyed and knitting. Regarding the kinds of patterns for natural indigo dyed products, only 8 kinds of patterns were used in Korean products; however, over 50 kinds of various patterns were used in Japanese products. Most patterns in the Korean products were ion patterns made by tie-dyeing. While in the Japanese products, the most frequent patterns were stripe patterns, followed by flower, dot, and ion patterns. Based on these research results, the problems of the textile design of Korean natural indigo dyed products were that most of the products have no pattern, and even though there were patterns, they lacked variations between the products. While in the case of Japan, they used the traditional and modem patterns of various textile representation techniques.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.19-24
• /
• 2012

We demonstrate the desert beetle back mimicking hybrid superhydrophilic/superhydrophobic patterned surface by using the combination method of colloidal lithography and gravure offset printing for nano and micro patterning, respectively. The two methods are cost-effective and industrially available techniques compared to the other nano/micro patterning methods. To verify the water collecting function of the hybrid surface, the water condensation behavior is investigated on the chilled surface in ambient temperature and high humidity. Due to the synergetic effect of drop and film wise condensation, the hybrid superhydrophobic/superhydrophilic surface shows the higher efficiency than one of single wettability surfaces. The work is underway to get the good patterns of hybrid surfaces for water collecting from the dew or fog.

• 한국진공학회지
• /
• 제20권1호
• /
• pp.63-69
• /
• 2011

본 연구에서는 기존 실리콘 반도체 기술 기반의 포토 및 이빔 리소그래피 공정을 통하여 유기 반도체 소자를 패터닝하였다. P3HT나 PEDOT 등의 유기 반도체는 용매에 녹기 때문에 MIMIC (micro-molding in capillaries)이나 inkjet printing 기술을 이용하여 마이크로미터 크기의 소자 제작이 가능하였으나, 펜타신은 용매에 녹지 않기 때문에 매우 복잡한 방법으로 마이크로미터 크기의 소자를 제작하여왔다. 그러나, 본 연구에서는 원자층 증착 방법으로 증착한 산화 알루미늄막을 펜타신의 보호층으로 이용하여 기존의 포토 및 이빔 리소그래피 방법으로 마이크로미터크기의 펜타신 소자를 제작하였으며 그 전기 특성을 확인하였다.

• 전자공학회논문지D
• /
• 제36D권10호
• /
• pp.23-30
• /
• 1999

본 논문에서는 전자선 직접 묘화 시스템을 이용하여 50 nm 이하의 패턴 폭을 가지는 패터닝 결과를 얻기 위한 실험을 수행하였다. SAL601 negative E-beam PR(Photo Resist)를 이용하여 실험을 진행하였고, E-beam 장비의 특성을 최대로 이용하기 위해서 PR의 두께를 100nm로 줄이고, field 크기를 200 ${um}m$로 줄여 실험하였으며, 또한 SAL601 PR의 경우 작은 선폭을 얻기 위해 중요한 요인 중에 하나인 PEB (Post Expose Bake) 온도와 시간을 줄이면서 실험을 진행하였다. 여기에 디지타이징 방식의 최적화를 통하여 50 nm 이하의 패턴 폭을 가지는 단선 패터닝 결과를 얻었다. 이 공정을 이용하여 단전자 메모리 소자에 응용 가능한 50 nm 급의 silicon 양자선과 silicon 양자점을 제작하였다. 이는 현재 많이 연구되고 있는 단전자 기억소자 및 국소 채널 MOS소자 제작에 유용할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제40권5호
• /
• pp.165-170
• /
• 2019

Cancer cells are different from normal cells in terms of life cycle, behavior, and growth patterns. Cancer cells can migrate freely in the body through blood vessels and lymph nodes. The cancer cells easily interact with various substrates including extracellular matrix and vessels and they can differentiate in the new environment. However, it is not well known about the adhesion preference of cancer cells on the substrate and the mechanism of their interaction. In this study, we prepared the nano-, micro-patterned substrates using E-beam lithography techniques. MCF-7 cells were tested on the substrates to find out their adhesion preference. The substrates were made by polydimethylsiloxane (PDMS) with specific patterns including pillars with a diameter of 500 nm, 700 nm, $3{\mu}m$ and $5{\mu}m$. MCF-7 cells were seeded on the substrates and incubated for 24 hours. As a result, this study clearly demonstrated that the MCF-7 cells preferred 700 nm patterning.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.371-376
• /
• 2003

The hot embossing process has been mentioned as one of major nanoreplication techniques. This is due to its simple process, low cost, high replication fidelity and relatively high throughput. As the initial step of quantitating the embossing process, simple parametric study about embossing time have been carried out using high-resolution masters which patterned by the DRIE process and laser machining. Under the various embossing time, the viscous flow of thin PMMA films into microcavities during Compression force has been investigated. Also, a study about simulating the viscous flow during embossing process has planned and continuum scale FDM analysis was applied on this simulation. With currently available test data and condition, simple FDM analysis using FLOW3D was made attempt to match simulation and experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1489-1492
• /
• 2005

Compared to other nano-patterning techniques, Nano imprint Lithography (NIL) has some advantages of high throughput and low process cost. To imprint low temperature and pressure, UV Nano imprint Lithography, which using the monomer based UV curable resin is suggested. Because fabrication of high fidelity pattern on topographical substrate is difficult, bi-layer Nano imprint lithography, which are consist of easily removable under-layer and imprinted pattern, is being used. If residual layer is not remained after imprinting, and under-layer is removed by oxygen RIE etching, we might be able to fabricate the bi-layer pattern for easy lift-off process.