• 한국물환경학회지
• /
• 제29권5호
• /
• pp.691-702
• /
• 2013

This review paper summarizes the theory, application, and potential drawbacks of diffusive gradient in thin film (DGT) probe which is a widely used in-situ passive sampling technique for monitoring inorganic contaminants in aquatic environments. The DGT probe employs a series of layers including a filter membrane, a diffusive hydrogel, and an ionic exchange resin gel in a plastic unit. The filter side is exposed to an aquatic environment after which dissolved inorganic contaminants, such as heavy metals and nuclides, diffuse through the hydrogel and are accumulated in the resin gel. After retrieval, the contaminants in the resin gel are extracted by strong acid or base and the concentrations are determined by analytical instruments. Then aqueous concentrations of the inorganic contaminants can be estimated from a mathematical equation. The DGT has also been used to monitor nutrients, such as ${PO_4}^{3-}$, in lakes, streams, and estuaries, which might be helpful in assessing eutrophic potential in aquatic environments. DGT is a robust in-situ passive sampling techniques for investigating bioavailability, toxicity, and speciation of inorganic contaminants in aquatic environments, and can be an effective monitoring tool for risk assessment.

• 대한화학회지
• /
• 제58권1호
• /
• pp.9-16
• /
• 2014

Borate 완충용액에서 Ni의 부동화 피막의 생성과정(growth kinetics)과 부동화 피막의 전기적 성질을 변전위법, 대 시간 전류법 그리고 단일 주파수 또는 다중 주파수 전기화학적 임피던스 측정법으로 조사하였다. 이때 생성되는 산화피막은 Mott-Schottky 식이 적용되는 p-형 반도체 성질을 보였으며, 낮은 전극전위에서 생성되는 Ni의 부동화 피막 $Ni(OH)_2$는 전극 전위가 증가하면서 NiO, NiO(OH)로 변화되는 것을 알 수 있었다.

• 대한화학회지
• /
• 제60권3호
• /
• pp.169-176
• /
• 2016

Borate 완충용액에서 Al의 부식과 부동화에 관하여 변전위법, 대 시간 전류법 그리고 다중 주파수 전기화학적 임피던스 측정법으로 조사하였다. 공기 또는 산소의 영향은 환원과정에 영향을 주었지만 산화반응에는 영향을 미치지 못 하는 것으로 보인다. 부동화 영역에서 생성되는 피막의 전기적 성질은 Mott-Schottky 식이 적용되는 n-type 반도체 성질을 보였다. 낮은 전극전위에서 생성되는 Al의 산화피막은 Al(OH)₃로 충분한 부동화 효과를 보이지 못하나, 전극전위가 증가하면서 Al₂O₃로 변하였다. Al₂O₃ 피막은 “전기장에 의한-이온의 이동” 과정에 의하여 성장하는 것으로 보인다.

• 한국엔터테인먼트산업학회논문지
• /
• 제15권7호
• /
• pp.59-70
• /
• 2021

하마구치 류스케의 2018년 작 영화 <아사코>는 시바사키 도모카의 원작소설 『꿈속에서도 깨어나서도』(2010)의 서사를 영화언어로 각색하는 과정에서 원작의 특징인 '유사'와 '반복'의 대안적 내러티브와 수동적 주인공을 배제하지 않고 계승한다. 본 논문은 하마구치 류스케가 영화 <아사코>의 서사를 구성하는 데 있어 수행한 소설적 '말하기'에서 영화적 '보여주기'로 서사를 전환하는 과정과 이로 인해 발생한 원작과 영화의 차이점을 고찰한다. 또한 영화 <아사코>가 전통적인 영화 시나리오 이론이 오랜 시간 지양해온 수동적 주인공이란 장치를 규범적 시나리오 작법의 다른 장치를 적극적으로 활용하는 스토리텔링으로 극복할 수 있던 요인 및 반복 구조와 규범적 내러티브 구조를 동시에 차용하여 모던 시네마와 고전적 영화의 관객 모두를 사로잡은 스토리텔링 전략에 관한 분석을 수행하고자 한다.

• 대한화학회지
• /
• 제56권1호
• /
• pp.47-53
• /
• 2012

Borate 완충용액에서 Zn의 부동화 피막이 생성되는 과정과 부동화 피막의 전기적 특성을 조사하였다. 이 때 생성되는 산화피막은 Mott-Schottky 식이 적용되는 n-형 반도체 성질을 보였으며, ZnO와 $Zn(OH)_2$로 구성되어 두 종류의 주개(깊은 주개와 얕은 주개)가 존재함을 알 수 있었다.

• 열처리공학회지
• /
• 제13권5호
• /
• pp.337-345
• /
• 2000

As a case hardening process for stainless steels, nitriding is more preferred and widely used than carburizing which deterioates corrosion resistance severely. In order to add the nitrogen into the stainless steels, passive film on the surface must be removed effectively before nitriding. Conventional gas nitriding process is performed in the temperature range of 500 to $600^{\circ}C$ with $NH_3$ gas, which often leads to sensitization of stainless steels. In this study, we tried to activate passive film of austenitic stainless steels by heating at low pressure. ($900^{\circ}C$, $5{\times}10^{-2}$ Torr.) Nitriding was performed at the solution treatment temperature of $1100^{\circ}C$ with nitrogen molecules instead of $NH_3$ gas. An attainable nitrogen content in a case depends on the nitrogen gas pressure at constant nitriding temperature. A case depth is proportional to the square root of solution time, which suggests that inward diffusion of nitrogen follows the Fick's 2nd law. Surface nitrogen atoms are dissolved as interstitial solutes, or precipitated in the form of MN, $M_2N$ nitrides, which increase the case hardeness. Dissolved nitrogen in the case enhances the cavitation resistance of austenitic stainless steels dramatically.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.354-359
• /
• 2015

Stainless steel has poor corrosion resistance in marine environment due to the breakdown of a passive film caused by chloride. It suffers electrochemical corrosion like pitting corrosion, crevice corrosion, and stress corrosion crack (SCC) in marine environment. In general, it indicates that the passive film of $Al_2O_3$ has better corrosion resistance than that of $Cr_2O_3$ in seawater. This paper investigated the damage behavior 304 stainless steel and hot-dip aluminized 304 stainless steel in seawater solution. Various electrochemical experiments were carried out including potential measurement, potentiodynaimic experiment, Tafel analysis and galvanostatic experiment. As a result of anodic polarization experiment, higher pitting damage depth was indicated at 304 stainless steel than hot-dip aluminized 304 stainless steel. In addition, relatively higher corrosion current density was shown at hot-dip aluminized stainless steel as a result of Tafel analysis.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.253-259
• /
• 2003

Zirconium based alloys have been extensively used as a cladding material for fuel rods in nuclear reactors, due to their low thermal neutron absorption cross-section, excellent corrosion resistance and good mechanical properties at high temperatures. However, a cladding material for fuel rods in nuclear reactors was contact water during long time at high-temperature, so it is necessary to improve the wear and corrosion resistance of the fuel cladding, At ambient environment, there are few data or paper on the characteristic of corrosion in chloride solution and acidic solution. The specimens used in this work are pure Zr and Zircaloy-4. Zircaloy-4 is a specific zirconium-based alloy containing, on a weight percent basis, 1.4% Sn, 0.2% Fe, 0.1% Cr. Pitting corrosion resistance of two alloys by ASTM G48 is higher than that of electrochemical method. Passive film formed on Zircaloy-4 is mainly composed of $ZrO_2$, metallic Sn, and iron species regardless of formation environments. Also, passive film formed on Zr alloys shows n-type semiconductic property on the base of Mott-Schottky plot.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.421-429
• /
• 2018

In this study, various electrochemical experiments were carried out to compare the corrosion characteristics of AA5052-O, AA5083-H321 and AA6061-T6 in seawater. The electrochemical impedance and potentiostatic polarization measurements showed that the corrosion resistance is decreased in the order of AA5052-O, AA5083-H321 and AA6061-T6, with AA5052-O being the highest resistant. This is closely associated with the property of passive film formed on three tested Al alloys. Based on the slope of Mott-Schottky plots of an n-type semiconductor, the density of oxygen vacancies in the passive film formed on the alloys was determined. This revealed that the defect density is increased in the order of AA5052-O, AA5083-H321 and AA6061-T6. Considering these facts, it is implied that the addition of Mg, Si, and Cu to the Al alloys can degrade the passivity, which is characterized by a passive film structure containing more defect sites, contributing to the decrease in corrosion resistance in seawater.

• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.85-97
• /
• 2000

The purpose of this study was to compare the corrosion characteristics between implant fixture and two types of abutment screw ; gold screw, titanium screw. The anodic polarization behavior, the galvanic corrosion behavior, and the crevice corrosion behavior of prepared samples were investigated using potentiostat and scanning electron microscope. The results were as follows: 1. Anodic polarization behavior of samples; The primary passivation potential of implant fixture was -420mV, implant abutment was -560mV. titanium screw was -370mV and gold screw was -230mV. All samples were shown to have a high corrosion potential and good formation of passive film. The critical passive current density of gold screw was higher than that of other samples and the sample of gold screw showed a unstable passive film formation at passive region. 2. Galvanic corrosion behavior of samples; Contact current density between implant fixture and titanium screw showed $8.023{\times}10^{-5}C/cm^2$. Contact current density between implant fixture and gold screw showed $5.142{\times}10^{-5}C/cm^2$. 3. Crevice corrosion behavior of samples; The crevice corrosion resistance of sample using titanium screw was higher than that of sample using gold screw, and a severe corrosion morphologies were observed at the fixture-screw interface by the scanning electron microscope.