• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.6-9
• /
• 2020

Thin film transistors (TFTs) with large-area, high mobility, and high reliability are important factors for next-generation displays. In particular, thin transistors based on IGZO oxide semiconductors are being actively researched for this application. In this study, several methods for improving the reliability of a-IGZO TFTs by applying various materials on a passivation layer are investigated. In the literature, inorganic SiO₂, TiO₂, Al₂O₃, ZTSO, and organic CYTOP have been used for passivation. In the case of Al₂O₃, excellent stability is exhibited compared to the non-passivation TFT under the conditions of negative bias illumination stress (NBIS) for 3 wavelengths (R, G, B). When CYTOP passivation, SiO₂ passivation, and non-passivation devices were compared under the same positive bias temperature stress (PBTS), the Vth shifts were 2.8 V, 3.3 V, and 4.5 V, respectively. The Vth shifts of TiO₂ passivation and non-passivation devices under the same NBTS were -2.2 V and -3.8 V, respectively. It is expected that the presented results will form the basis for further research to improve the reliability of a-IGZO TFT.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.405-405
• /
• 2011

실리콘 질화막(SiNx : H)는 결정질 실리콘 태양전지 제작 공정에서 ARC (Anti Reflection Coating)과 표면 패시베이션의 역할로써 많이 사용되었지만, layer 자체의 quality가 좋지 않기 때문에 최근에는 SiNx/SiO2 이중 layer로 passivation layer를 형성하고 있다. SiO2 layer는 Si substrate를 소스로 하여 성장시키기 때문에 막의 질이 우수하기는 하지만, 막 성장을 위해서 Furnace를 이용해야 하기 때문에, 공정 시간과 공정 비용을 증가시키는 단점이 있다. 본 연구에서는 SiO2 layer를 Furnace가 아닌, 질산(HNO3)을 이용하여SiNx/Thin SiO2 passivation layer 제작하였다. 실험에서는 SiO2 성장을 위해서 질산 용액에 p-type wafer를 dipping하여 시간대 별, SiO2 막의 두께를 관찰하였고, passivation의 효과를 확인하기 위해 lifetime을 측정하였다. 그 결과 SiNx/SiO2 이중 passivation layer는 SiNx 단일 막으로 passivation을 하였을 때보다, lifetime이 10 us 상승했고, 셀 제작시 효율은 약 1.1%, Fill Factor는 약 4% 정도 증가한 것을 확인할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.128.1-128.1
• /
• 2011

In amorphous silicon and crystalline silicon(a-Si:H/c-Si) heterojuction solar cells, intrinsic hydrogenated amorphous silicon(a-Si:H) films play an important role to passivate the crystalline silicon wafer surfaces. We have studied the correlation between the surface passivation quality and nature of the Si-H bonding at the a-Si:H/c-Si interface. The samples were obtained by VHF-CVD under different deposition conditions. The passivation quality and analysis of all structures studied was performed by means of quasi steady state photoconductance(QSSPC) methods and fourier transform infrared spectrometer(FTIR) measurements respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.346-346
• /
• 2009

For high efficiency hetero junction solar cell over 20%, good silicon wafer passivation is one of the most important technological factor. Compared to the conventional PECVD technique, HWCVD has appeared as an promising alternative for high quality passivation layer formation. In this work, HWCVD passivation layer characteristics have been intensively investigated on wafer surface treatment, Hydrogen density in deposited thin layer and thermal effects in deposition process. Comprehensive results of the individual process factors on interface passivation has been discussed and resultant silicon hetero junction solar cell characteristics has been investigated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.1
• /
• pp.41-45
• /
• 2014

We have investigated the passivation property of $SiN_x$ and $SiO_2$ thin films formed using various process conditions for the application of crystalline Si solar cells. An increase in the thickness of $SiN_x$ deposited using plasma enhanced chemical vapor deposition (PECVD) led to the improvement of passivation quality. This could be associated with the passivation of Si dangling bonds by hydrogen atoms which were supplied during PECVD deposition. The $SiO_2$ thin films grown using dry oxidation process exhibited better passivation behavior than those using wet oxidation process, implying the dry oxidation process was more effective in the formation of high quality $SiO_2$ thin films. The relative effective life time gradually decreased with increasing dry oxidation temperature. Such a degradation of passivation behavior could be attributed to the increase in interface trap density caused by thermal damages.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.93-93
• /
• 2009

실리콘 태양전지의 효율 향상을 위한 노력의 일환으로 결정질 실리콘 웨이퍼 표면passivation 물질 중 Atomic Layer Deposition (ALD)을 이용하여 증착한 $Al_2O_3$ 박막에 대한 관심이 증가하고 있다. 본 연구에서는 $Al_2O_3$ 박막의 증착 전 실리콘 웨이퍼의 산화막 두께에 따른 passivation 효과에 대해서 연구하였다. 실리콘 산화막은 $HNO_3$ 용액을 사용하여 화학적으로 생성시켰으며 $HNO_3$ 용액과의 반응 시간을 조절하여 실리콘 산화막의 두께를 조절하였다. 실리콘 산화막 생성 후 ALD로 $Al_2O_3$ 박막을 증착하였으며 증착 후 $N_2$ 분위기에서 annealing 하였다. Annealing 후 passivation 효과는 Quasi-Steady-State Photo Conductance를 사용하여 minority carrier의 lifetime을 측정하였다. Capacitance-Voltage measurement, Transmission Electron Microscopy, Ellipsometry를 사용하여 실리콘 산화막의 두께에 따른 $Al_2O_3$ 박막의 passivation 효과를 분석하였다.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.223-224
• /
• 2008

Important element are low cost, high-efficiency crystalline silicon solar cells. in this paper, Will be able to contribute in low cost, high-efficiency silicon solar cells, Applies oxide/nitride passivation, produced screen-printed solar cells. and the Measures efficiency, and evaluated a justice quality oxide/nitride passivation screen-printed solar cells.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.462-462
• /
• 2014

The effect of rear passivation for passivated emitter and rear cell (PERC) using ozone and H2O oxidant of atomic layer deposited (ALD) Al2O3 was studied by post-annealing in N2 and forming gas ambients. Rear surface of PERC solar cell was passivated by Al2O3 grown by ALD with ozone and H2O oxidant. Al2O3 grown by ALD with ozone oxidant has been known to have many advantages, such as lower interface defects, low leakage current density. Its passivation quality is better than Al2O3 with H2O. Al2O3 layer with 10 nm and 20 nm thickness was grown at $150^{\circ}C$ with ozone oxidant and at $250^{\circ}C$ with H2O oxidant. And then each samples were post-annealled at $450^{\circ}C$ in N2 ambients and at $850^{\circ}C$ in forming gas ambients. The passivation quality was investigated by measuring the minority carrier lifetime respectively. We examined atomic layer deposited Al2O3 such as growth rate, film density, thickness, negative fixed charge density at AlOx/Si interface, and reflectance. The influences of process temperature and heat treatment were investigated using Sinton (WCT-120) by Quasi-Steady State Photoconductance (QSSPC) mode. Ozone-based ALD Al2O3 film shows the best carrier lifetime at lower deposition temperature than H2O-based ALD.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.4
• /
• pp.483-490
• /
• 2009

In this paper, a novel low-damage silicon nitride passivation for 100nm InAlAs/InGaAs MHEMTs has been developed using remote ICPCVD. The silicon nitride deposited by ICPCVD showed higher quality, higher density, and lower hydrogen concentration than those of silicon nitride deposited by PECVD. In particular, we successfully minimized the plasma damage by separating the silicon nitride deposition region remotely from ICP generation region, typically with distance of 34cm. The silicon nitride passivation with remote ICPCVD has been successfully demonstrated on GaAs MHEMTs with minimized damage. The passivated devices showed considerable improvement in DC characteristics and also exhibited excellent RF characteristics($f_T$of 200GHz).The devices with remote ICPCVD passivation of 50nm silicon nitride exhibited 22% improvement(535mS/mm to 654mS/mm) of a maximum extrinsic transconductance($g_{m.max}$) and 20% improvement(551mA/mm to 662mA/mm) of a maximum saturation drain current ($I_{DS.max}$) compared to those of unpassivated ones, respectively. The results achieved in this work demonstrate that remote ICPCVD is a suitable candidate for the next-generation MHEMT passivation technique.