• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4795-4802
• /
• 2010

In order to solve the traffic problem in jeju, we must reduce demand for car travel. In addition, demand for passenger travel by public transport policy is needed for conversion. And to improve the quality of public transport services are desperately needed. The purpose of this study, personal characteristics of the trip traveler and the relationship between transportation choice, and personal effectiveness as a factor in travel costs and travel time on the impact of transportation choices will investigate. Restructure its public transportation routes, when to switch to buses to car traffic on the data as a basis for the factors that may be. In addition to improving the quality of public transport services is expected to be able to contribute. To study the performance of the May 2010 survey was conducted. And multinominal logit model were conducted. According to the analysis, People who own homes and families with more than 5 people are likely to use cars. If a prolonged travel time is likely to use buses. However, increasing the cost of travel increases the likelihood that the car is available.

• Journal of Korean Society of Transportation
• /
• v.29 no.6
• /
• pp.117-128
• /
• 2011

In this study, a model is developed to predict emission factors, which aims to objectively evaluate the impact of transport projects on air quality. Two emission prediction models for the years of 2015 and 2030 are developed using the historical trends in vehicle aging and vehicle deterioration factors. The analysis results show that the emission factors under the operating speed of 30km/h for the year 2030 are 5~37% and 2~83% less than those used in the current studies for passenger cars and bus/trucks, respectively. The statistically validated experiment results demonstrate the applicability of the proposed model to evaluation of the impact of transport policies on air quality.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.189-198
• /
• 2014

This paper presents the results of an experimental investigation of the correlation between the lubrication characteristics of an engine and its fuel economy. Improving the lubrication characteristics of the engine oil is one of the most efficient ways to improve a car's fuel economy. The methods to accomplish this include lowering the viscosity, adding a friction modifier and optimizing the shear stability index of a viscosity index improver. In addition, it is necessary to use different methods to reduce the friction to individual lubrication areas, because different lubrication regimes are used for different engine parts. The experimental investigation in this study is based on design of experiments ; this paper presents the results of a modified Sequence VID test, which is an ASTM standard test used to measure the effects of automotive engine oils on the fuel economy of passenger cars. The results demonstrate the effects of the following lubrication factors on the fuel economy : the low temperature cranking viscosity, high-temperature high shear (HTHS) viscosity, friction modifier, polymer type and shear stability index of the viscosity index improver. Moreover, this study involves an analysis of variance based on design of experiments. The test results show that the HTHS viscosity, friction modifier and shear stability index of the viscosity index improver are more effective than the other factors. Therefore, lowering the viscosity, adding a friction modifier and optimizing the shear stability index of a viscosity index improver should be considered to improve fuel economy.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2014

In this paper, we present our analysis of tribological failure examples for an anti-lock brake system(ABS) in a car. The study range of this paper is to improve the quality of ABS system by analyzing with sensor, computer, actuator and oil lines. In the first example, the brake leak from hydraulic supply line in a caliper on the rear left side of the ABS hydraulic modulator. This produces the sponge phenomenon, where the car does not brake even when the driver operates the brake pedal. The hydraulic unit operating ABS is actuator that play role regulating drive condition according with the oil pressure supplied with wheel of a car. In the second example, the service man does not completely tighten the fixed bolt after repairing the car. This causes the ABS warning lamp to light up as the ABS wheel speed sensor cannot detect whether the ABS has been activated. In the third example, the ABS electronic control unit is separated from the soldered part of the inner circuit board. Consequently, the ABS fails in control because the ABS motor pump receives no-signal for the hydraulic unit. The wheel speed sensor has to large durability because of giving signal of acting condition to computer by detected the acceleration and deceleration of wheel of a car. In the fourth example, the ABS warning lamp lights up of when cracks propagate in the circuit board soldering part. The circuit of this computer is very important part for input and output the operating signal of system. Such failures can aggravate the durability of the ABS. Thus, the ABS needs to be optimized to eliminate malfunction phenomenon.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.92-99
• /
• 2013

High oil price and global warming problem are being continued all over the world. For this reason, fuel economy and emission of greenhouse gas are regulated by law in many countries. Therefore many companies are researching and producing hybrid electric vehicles (HEVs) which substitute conventional internal combustion engine vehicle. However, these researches and productions are restricted to mainly passenger cars. Because of cost and physical problems, commercial vehicles are difficult to evaluate fuel economy. So simulations are important and it is necessary to know how sensitive parameters that enter into simulation affect. In this paper, forward simulations using AVL Cruise were conducted for analysis of fuel economy for parallel hybrid bus and were repeated by changing each parameter. Based on these results, root mean square errors (RMSE) are calculated for analysis of fuel economy sensitivity. The number of target parameters are 15. These parameters were classified with high and low sensitivity parameter relatively.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.111-121
• /
• 2007

A transit assignment model can forecast the behaviors of transit users. thereby playing an important role In the evaluation of transit policies. Most existing transit assignment models are based on the models for passenger cars; therefore they cannot reflect the specific characteristics of transit modes. In addition most of the existing models are based on a single transit mode (bus or rail), and they cannot forecast the behaviors of transit users in a changing mass transportation system. The goal of this study is to overcome these problems with the exiting models and to develop a more realistic model. The newly developed model is based on mixed transit modes and is a stochastic model that can reflect the different preferences of each transit user for travel time and transfering. Data gathered from the Seoul metropolitan area's smart card are used to calibrate this model. This study is expected to be used for the evaluation of transportation policies and to attribute the development of transit revitalization strategies.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.403-411
• /
• 2020

This paper discusses the main findings of the development of the twin-hull Car ferry for island freight and passenger transport. The final model had a 19 m wide beam to create enough space for cars on the deck area and thus, enhance the economic feasibility in the market. The vessel had a V-shape with a bulbous bow to minimize the wave-making resistance and the hydrodynamic performance of the ship was verified through computational fluid dynamics. Multi-objective optimization problems of Pareto simulated annealing were used to achieve a weight reduction of approximately 3.9 % and reduce the manufacturing cost. The main results obtained in this study are expected to be useful to engineers and professionals in related industries interested in research on twin catamaran.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.2
• /
• pp.113-119
• /
• 2020

Motor noise is a major concern in order to improve perceptual feeling of car interior sound due to increased motor usage in passenger cars. The purpose of this study is to propose factors that can represent the acoustic performance of motor noise according to the change of load. To this end, at first, it is shown that power spectrum and total loudness are not fit for noise performance, and then, PN_B, partial loudness related to the brush friction component, and PN_R, partial loudness related to the torque ripple component are investigated as factors representing motor noise. The performance curve of motor noise using PN_B and PN_R is proposed to identify trends of motor noise according to the loads. The curve could be a guide for the noise control, the selection of motor, and the improvement of a system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.128-141
• /
• 2018

In this paper, a methodology to analyze the potential safe benefit of six cooperative driver assistance systems via V2V (vehicle-to-vehicle) communications is proposed. Although it is quite necessary to assess social impact with respect to new safety technologies for cooperative vehicles with V2V communications, there are few studies in Korea to predict the quantitative safety benefit analysis. In this study, traffic accident scenarios are classified based on traffic fatality between passenger cars. The sequential collision type is classified for a multiple pile-up with respect to collision direction such as forward, side, head-on collisions. Then movement of surrounding vehicle is considered for the scenario classification. Next, the cooperative driver assistance systems such as forward collision warning, blind spot detection, and intersection movement assistance are related with the corresponding accident scenarios. Finally, it is summarized how much traffic fatality may be reduced potentially due to the V2V communication based safety services.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.149-155
• /
• 2015

With increasing of GDP, the registration number of passenger cars has exceeded 20 million last year in Korea. Especially, the registration number of the diesel engine vehicles has been increasing. However, the WHO(World Health Organization) IARC (International Agency for Research on Cancer) has reported that diesel engine exhaust gas is an one of HAPs, which has carcinogenic for human, and they have designated it to Group 1. To solve this problem, exhaust gas from diesel engines has to be controlled. Thus, it has been controlling by European regulatory standard in Korea. On the other hand, in order to meet the enhanced emission regulations, all manufacturing company applied $NO_x$ control device to vehicles such as EGR (Exhaust Gas Recirculation), SCR (Selective Catalytic Reduction) and so on. However, these devices (EGR, SCR) were operated by difference reaction mechanism respectively, and the composition of exhaust gas would be differenced from that of them. In this study, it was conducted to evaluate variety characteristics on changing of exhaust gas composition by each $NO_x$ control device, and the heavy duty diesel trucks were chosen as experimental vehicles. From the result, it revealed that vehicles (with EGR) were discharged higher THC as 52.5% than that of others (with SCR). However, it did not followed that trend, in the case of CO; it was discharged as 57.2% lower than that of others (with SCR). In the future, these data would be used to apply to efficient $NO_x$ control device for meeting to EURO 6.