• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.61-73
• /
• 2015

The early-phase naval ship design demands requirements synthesis rather than design synthesis, which conducts engineering design for several domains on a detailed level. Requirements synthesis focuses on creating a balanced set of required operational capabilities satisfying user's needs and concept of operations. Requirements are evolved from capability based languages to function based language by statistical exploration and engineering design which are derived in the following order: concept alternative, concept baseline, initial baseline and functional baseline. The early-phase naval ship design process can be divided into three passes: concept definition, concept exploration and concept development. Main activities and outcomes in each pass are shortly presented. Concept definition is the first important step that produces a concept baseline through extensive design space exploration promptly. Design space exploration applies a statistical approach to explore design trends of existing ships and produce feasible design range corresponding to concept alternative. It further helps naval systems engineers and operational researchers by inducing useful responses to user and stakeholders' questions at a sufficient degree of confidence and success in the very early ship design. The focus of this paper is on the flow of design space exploration, and its application to a high-speed patrol craft. The views expressed in this paper are those of the authors, and do not reflect the official policy or rule of the Navy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.73-80
• /
• 2011

In this paper, we design and implementation of effective remote management system for VoIP(Voice over IP) terminal. Ordinary VoIP terminal is connected inside of NAT(Network Address Translation) assigned private IP address. NAT provides address mapping between outside public IP address and inside private IP address, for outside system telephone call is connected to inside VoIP terminal. In this paper, we also design and implementation of UDP hole punching function that the outside calls pass through the NAT, for outside management system call is connected to internal VoIP terminal, and gathered to management information of the VoIP terminal. Also, we evaluated and analysed of developed system in the test environment. As a result of test, It showed that it was well performed without any data error and data loss in the connectivity, and It showed that it was well gathered management information of the VoIP terminal.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.55-64
• /
• 2014

In a Web application, you can pass without restrictions special network security devices such as IPS and F/W, URL parameter, which is an important element of communication between the client and the server, is forwarded to the Web server. Parameters are modulated by an attacker requests a URL, disclose confidential information or through e-commerce, can take financial gain. Vulnerability parameter manipulation thereof cannot be able to determine whether to operate in only determined logical application, blocked with Web Application Firewall. In this paper, I will present a technique OTACUS(One-Time Access Control URL System) to complement the shortcomings of the measures existing approaches. OTACUS can be effectively blocked the modulation of the POST or GET method parameters passed to the server by preventing the exposure of the URL to the attacker by using clean URL technique simplifies complex URL that contains the parameter. Performance test results of the actual implementation OTACUS proves that it is possible to show a stable operation of less than 3% increase in the load.

• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.83-93
• /
• 2020

With the rapid increase of vehicles, various traffic problems, e.g., car crashes, traffic congestions, etc, frequently occur in the road environment of the urban area. To overcome such traffic problems, intelligent transportation systems have been developed with a traffic flow analysis. The traffic flow, which can be estimated by the vehicle counting scheme, plays an important role to manage and control the urban traffic. In this paper, we propose a novel vehicle counting method based on predicted centers of each lane. Specifically, the centers of each lane are detected by using the accumulated movement of vehicles and its filtered responses. The number of vehicles, which pass through extracted centers, is counted by checking the closest trajectories of the corresponding vehicles. Various experimental results on road CCTV videos demonstrate that the proposed method is effective for vehicle counting.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.1
• /
• pp.89-96
• /
• 2015

Smart water grid is a water network with communication to save water and energy using various water resources. In smart water grid, water product from the various sources can be blended to be supplied to end-users. The product water blending was reported by literatures while feed water blending has been rarely reported so far. In this work, a commercial reverse osmosis (RO) system design software provided by a membrane manufacturer was used to elucidate the effect of feed water blending on the performance of seawater reverse osmosis (SWRO) plant. Fresh water from exisiting water resource was assumed to be blended to seawater to decrease salt concentration of the RO feed water. The feed water blending can simplify the RO system from double to single pass and decrease seawater intake amount, the unit prices of the RO system components including high pressure pump, and operation risk. Due to the increase in RO plant capacity with the feed water blending, however, the RO membrane area and total power consumption increase at higher water blending rates. Therefore, a specific benefit-cost analysis should be carried out to apply the feed water blending to SWRO plants.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1236-1243
• /
• 2010

The perimeter defense system was created and its characteristics were evaluated. It was designed to utilize the fiber sensing device, namely OTDR(Optical Time Domain Reflectometer) which has been used for the maintenance of the optical communication network. An OTDR was constituted by a pulse laser with the nature of 1310nm, +15dBm for the observation of 400 meter optical fence. The high-speed 32-bit processor(S3C2440) has applied to MPU(Main Processor Unit) which helps to improve the performance of OTDR algorithms. Consequently, the maximum error was 0.84 meter on the performance test of the 10km monitoring and the pass criteria of ${\pm}1m$ satisfied in all the sections. The alarm delay time was under 3 sec after detecting the disorder. For the case of secondary trespassing after primary trespassing, the optical switch was installed in OTDR to monitor the secondary trespassing and to measure the multi-point detection. Therefore, this paper shows that the detections of secondary trespassing and multi-point is possible by means of optical switch.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.103-105
• /
• 2008

In grid-interconnection system, a fast, robust and precise phase angle detector is most important to grid synchronization and the active power control. The phase angle can be easily estimated by synchronous dq PLL system. On the other hand under unbalanced voltage condition, synchronous dq PLL system has problem that harmonics occur to phase angle or magnitude of grid voltage because of the effect of the negative sequence components. So, To eliminate the negative sequence components, the PLL method using APF (All Pass Filter) in a stationery reference frame to extract positive sequence components under unbalanced voltage condition is researched. In this paper, we propose a new PLL method with decoupling network using APF in a synchronous reference frame to extract the positive sequence components of the grid voltage under unbalanced grid. The cut-off frequency of APF in a synchronous reference frame can be set to twice of the fundamental frequency comparing with that of APF in a stationery reference frame which is the fundamental frequency. The proposed PLL strategy can detect the phase angle quickly and accurately under unbalanced gird voltages. Simulation and experimental results are presented to verify the proposed strategy under different kind of voltage dips.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.73-80
• /
• 2003

The Java programming language is designed for developing effective applications in a heterogeneous network environment. Major problem in Java is its performance. many attractive features of Java make the development of software easy, but also make it expensive to support ; applications written in Java are often much slower than their counterparts written in C or C++. To use Java`s attractive features without the performance penalty, sophisticated optimizations and runtime systems are required. Optimising Java bytecode has several advantages. First, the bytecode is independent of any compiler that is used to generate it. Second, the bytecode optimization can be performed as a pre=pass to Just-In-Time(JIT) compilation. Many attractive features of Java make the development of software easy, but also make it expensive to support. The goal of this work is to develop automatic construction of code optimizer for Java bytecode. We`ve designed and implemented a Bytecode Optimizer that performs the peephole optimization, bytecode-specific optimization, and method-inlining techniques. Using the Classfile optimizer, we see up to 9% improvement in speed and about 20% size reduction in Java class files, when compared to average code using the interpreter alone.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.705-711
• /
• 2011

This paper proposes an effective algorithm of license plate recognition for industrial applications. By applying Canny edge detection on a vehicle image, it is possible to find a connected rectangular, which is a strong candidate for license plate. The color information of license plate separates plates into white and green. Then, OTSU binary image processing and foreground neighbor pixel propagation algorithm CLNF will be applied to each license plates to reduce noise except numbers and letters. Finally, through labeling, numbers and letters will be extracted from the license plate. Letter and number regions, separated from the plate, pass through mesh method and thinning process for extracting feature vectors by X-Y projection method. The extracted feature vectors are compared with the pre-learned weighting values by backpropagation neural network to execute final recognition process. The experiment results show that the proposed license plate recognition algorithm works effectively.

• Strategy21
• /
• s.37
• /
• pp.144-176
• /
• 2015

In September 2013, President Park Geun-hye announced her controversial "Look North" policy, of which the most salient aspect is the "Eurasia Initiative". This comprises various proposals designed to overcome existing constraints by developing new markets and creating new economic partners in continental areas from which South Korea has been alienated since the end of World War II, and this dovetails nicely with China's One Belt, One Road Initiative. The concepts of the "Silk Road Rail Express (SRX)" and the "East Sea Rim Maritime Community (ESRMC)" have also been discussed. SRX is at present a purely symbolic railroad project intended to encourage individual, cultural, trade and diplomatic exchanges. ESRMC is a model for establishing an ad hoc community to promote regional economic cooperation around the East Sea. President Park's Eurasia Initiative will provide South Korean investment for the Northeast to complement Russian plans, like the "Northern Energy Road" being built by Gazprom, and Chinese plans, like the Chang-Ji-Tu Development Plan for the North Korean port of Rajin. China's trade, as well as its energy and food supplies, pass through the Strait of Malacca and the Indian Ocean, and are thus vulnerable to interdiction by India or the US. China is therefore trying to reduce its exposure geopolitical risk by establishing a network of corridors between the Belt and the Road to provide alternative paths. The "China-Pakistan Economic Corridor" and the "China-Myanmar Economic Corridor" provide such connections, and South Korea hopes that SRX and ESRMC can become part of a "China-South Korea Economic Corridor". This concept could do much to revitalize the underdeveloped northern provinces of China and Russia's Far East, not to mention North Korea. By linking up the Trans-Siberian Railway, the Trans-China Railway, the Trans-Mongolian Railway and the Trans-Korean Railway all these Asian countries will be connected to one another, and ultimately to Europe. An interim connection between China and South Korea using a rail-ferry has also been proposed.