• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.169-176
• /
• 1998

A method for the dynamic analysis of multibody systems undertaking impulsive force is introduced in this paper. A partial velocity matrix based on Kane's method is introduced to reduce the number of equations to be solved. Only minimum number of equations of motion can be obtained by using the partial velocity matrix. This reduces the computational effort significantly to obtain the dynamic response of the system. At the very moment of the impulse, instead of using the numerical integrator to solve the equations of motion, the impulse and momentum principle is used to obtain the dynamic response. The impulse as wall as the reaction force acting on the kinematic joints can easily calculated too.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.922-924
• /
• 1998

In this paper, an optical fiber sensor(OF sensor) utilizing the principal of Mach-Zehnder interferometer were proposed to detect the partial discharge signals in insulating oil. At first the AC breakdown signals were detected to check the response of the OF sensor. The detected signals from OF sensor was consistent with that from current probe. After the response checking, simultaneous measurements and continuous recording were made of electrical and the OF sensor signals from partial discharge(PD) produced by IEC(b) electrode system immersed in insulating oil. The continuous recording made it possible to extract basic quantities of PD from the OF sensor signals, such as pulse phase and pulse amplitude distribution. Through the signal analysis, the absolute peaks of the OF sensor PD signal was found to be increased with the amplitude of electrical signals, and these results mean that there is a strong correlation between OF sensor and electrical PD signals. It was demonstrated that the OF sensor in this research had a possibility to detect the PD signals in power apparatus.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권11호
• /
• pp.512-515
• /
• 2003

This paper is to investigate how partial discharge pulse signal can flow in 6.6㎸ motor stator windings. Pulse propagation is experimentally analyzed in stator windings using a variety of frequency-domain techniques. The experiments were performed on two stator windings in the laboratory. Spectrum analyzer(9KHz to 3㎓) with tracking generator(100kHz to 3㎓) was used. Sweep time of the tracking generator was looms. The frequency spectrum of the response signal was detected by active FET probe(1㎓). The active FET probe has a flat amplitude response up to 1㎓ without high frequency attenuation. The stator winding acts as a low-pass filter below 600KHz, the high-frequency components being highly declined. The resonance peaks show about 1.1MHz and 2MHz in low frequency of No. 1 and No. 2 stator windings, respectively. This low-frequency range indicates that attenuation is low. The peaks of partial discharge magnitude show about 900MHz, 1.6MHz in No. 1 stator winding and about 800KHz, 1.4MHz in No. 2 stator winding.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1048-1057
• /
• 2008

This paper represents a design method for PID or low-order controllers cascaded with a linear plant in the unit feedback system where it is required to meet the given time response specifications such as overshoot and settling time. This problem is difficult to solve because the zeros of the controller appear in the numerator of the overall system and thus those zeros may make the time response design difficult. In this paper, we propose a new approach based on the partial model matching and the so called K-polynomial. The partial matching problem is formulated to an optimization problem in which a quadratic function of coefficient errors between a target model and the resulting closed loop system is minimized. For the sake of satisfying the closed loop stability, a set of quadratic constraints associated with the cost function is introduced. As a result, the controller designed meets both time response requirements and the closed loop stability, if any. It is shown through several examples that the present method can be easily applied to these problems.

• 한국통신학회논문지
• /
• 제30권9C호
• /
• pp.871-876
• /
• 2005

본 논문에서는 비대칭적인 채널 특성을 갖는 고밀도 광 기록 시스템에 적용 가능한 적응 등화 부분 응답 최대유사(partial response maximum likelihood, PRML) 검출 방법을 제안한다. 모의실험을 통해 비대칭적인 채널에서 제안한 PRML 검출 방법이 기존의 PRML 방법보다 성능이 향상되는 것을 확인하였고, Verilog HDL을 이용하여 구현 및 검증하였다. 본 논문에서 제안한 적응 등화기는 LMS(Least Mean Square error) 알고리즘을 이용한 탭 계수 갱신부와 FIR 필터로 구성되어 있다. FIR 필터는 속도 향상을 위해 일반적으로 이용되는 DF(Direct Form) 방식이 아닌 TDF(Transposed Direct Form) 방식을 이용하여 구현하였다. 또한, 검출기는 레지스터 변환(register exchange, RE) 방식을 이용한 비터비 검출 방법으로 구현하였다.

• 한국통신학회논문지
• /
• 제13권4호
• /
• pp.285-301
• /
• 1988

다치 직교 PRS(Partial Response Signaling) 시스템이 잡음, 간섭, 캐리어옵\ulcornerV, 위상지터, 페이딩 등에 의해 개별적으로 또는 복합적으로 영향을 받았을 경우에 대한 PRS 신호의 오율식을 유도하였다. 유도된 식에 의해 반송파 대잡음 전력비, 반송파 대 간섭파 전력비, 위상에러, 임펄스 지수, 가우스성 잡음전력 대 임펄스성 잡음 전력비, PLL(Phase Locked Loop)의 신호 대 잡음전력비, 페이딩 지수 등을 함수로 하여 수치계산을 통해 각 경우의 오율특성을 구했다. 얻은 결과로부터, 일반적으로 임펄스성 잡음보다 오율 특성을 보다 더 열화시키지만 일단 신호가 페이딩을 받게되면 그 반대로 가우스성 잡음이 임펄스성 잡음보다 더욱 에러를 발생시킨다는 것을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.531-532
• /
• 2006

This paper presents our implemented, synthesized and tested on demand and partial reconfiguration approaches for FIR filters using Xilinx Virtex FPGAs. Our scope is to implement a low-power, area-efficient autonomously reconfigurable digital signal processing architecture that is tailored for the realization of arbitrary response FIR filters on Xilinx Virtex4 FPGAs. The implementation of design addresses area efficiency and flexibility allowing dynamically inserting and/or removing the partial modules to implement the partial reconfigurable FIR filters with various taps. This partial reconfigurable FIR filter design shows the configuration time improvement, good area efficiency and flexibility by using the dynamic partial reconfiguration method.

• 한국전자파학회논문지
• /
• 제16권2호
• /
• pp.128-133
• /
• 2005

본 논문에서 는 새로운 구조의 partial H-plane 필터 인 아이 리스 결합형 Partial H-plane 필터를 제안했다. 제안된 필터는 기존의 H-plane 필터와 구조적으로 비교될 수 있고 커플링 구조로 아이리스 타입의 차단도파로를 사용한다. 시뮬레이션 기반의 필터 설계법으로 아이리스 결합형 partial H-plane 필터와 H-plane 필터를 설계하여 서로 특성을 비교했으며 제안된 필터가 기존의 H-plane필터와 비교해서 사분의 일의 부피를 가지면서 주파수 응답특성이 같은 것을 확인했다. H-밴드에서 측정 결과와 시뮬레이션 결과가 잘 일치하는 것을 확인했다.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.109-123
• /
• 2021

This research endeavor intends to use the implicit finite element method to investigate the structural response of steel shear walls with partial plate-column connection. To this end, comprehensive verification studies are initially performed by comparing the numerical predictions with several reported experimental results in order to demonstrate the reliability and accuracy of the implicit analysis method. Comparison is made between the hysteresis curves, failure modes, and base shear capacities predicted numerically using ABAQUS software and obtained/observed experimentally. Following the validation of the finite element analysis approach, the effects of partial plate-column connection on the strength and stiffness performances of steel shear wall systems with different web-plate slenderness and aspect ratios under monotonic loading are investigated through a parametric study. While removal of the connection between the web-plate and columns can be beneficial by decreasing the overall system demand on the vertical boundary members, based on the results and findings of this study such detachment can lower the stiffness and strength capacities of steel shear walls by about 25%, on average.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.786-791
• /
• 2005

This paper is concerned with the examination and evaluation concerning a tuning method of multivariable PID controllers based on partial model matching on frequency domain proposed by authors from practical view point. In this case, PID controller parameters are determined by minimizing the loss function defined by the difference between frequency response of ideal model transfer function and actual frequency response on several frequency points. The purpose of the paper is to examine and evaluate the performance of the method through actual experiments of MIMO liquid level experimental process control equipment.