Browse > Article

Propagation of Partial Discharge Pulse in High Voltage Motor Stator Windings  

김희동 (한국전력연구원)
Publication Information
The Transactions of the Korean Institute of Electrical Engineers C / v.52, no.11, 2003 , pp. 512-515 More about this Journal
Abstract
This paper is to investigate how partial discharge pulse signal can flow in 6.6㎸ motor stator windings. Pulse propagation is experimentally analyzed in stator windings using a variety of frequency-domain techniques. The experiments were performed on two stator windings in the laboratory. Spectrum analyzer(9KHz to 3㎓) with tracking generator(100kHz to 3㎓) was used. Sweep time of the tracking generator was looms. The frequency spectrum of the response signal was detected by active FET probe(1㎓). The active FET probe has a flat amplitude response up to 1㎓ without high frequency attenuation. The stator winding acts as a low-pass filter below 600KHz, the high-frequency components being highly declined. The resonance peaks show about 1.1MHz and 2MHz in low frequency of No. 1 and No. 2 stator windings, respectively. This low-frequency range indicates that attenuation is low. The peaks of partial discharge magnitude show about 900MHz, 1.6MHz in No. 1 stator winding and about 800KHz, 1.4MHz in No. 2 stator winding.
Keywords
Citations & Related Records
연도 인용수 순위
  • Reference
1 G. Stone, 'Importance of Bandwidth in PD Measurement in Operating Motors and Generators', IEEE Trans. on Dielectrics and Electr. Insul., Vol. 7, No. 1, pp. 6-11, 2000   DOI   ScienceOn
2 Q. Su, C. Chang and R. C. Tychsen, 'Travelling Wave Propagation Partial Discharges Along Generator Stator Windings', Proceedings of the 5th International Conference on Properties and Application of Dielectric Materials, pp. 1132-1135, 1997   DOI
3 IEEE Std 1434-2000, IEEE Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery
4 I. J Kemp and C. Zhou, 'Measurement Strategies for PD Testing and Pulse Propagation in Stator Windings', IEEE International Symposium on Electr. Insul., pp. 214-217, 1996   DOI
5 J. Kemp, H. Zhu, H. G. Sedding, J W. Wood and W. K. Hogg, 'Towards a new partial discharge calibration strategy based on the transfer function of machine stator windings', IEE Proc.-Sci. Meas. Technol., Vol. 143, No. 1, pp. 57-62, 1996   DOI   ScienceOn
6 J W. Wood, H. G. Sedding, W. K. Hogg, J Kemp, H. Zhu, 'Partial discharge in HV machines ; considerations for a PD specification', IEE Proc.-Sci. Meas. Technol., Vol. 140, No.5, pp. 409-416, 1993