• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.91-102
• /
• 2002

We need a component-based system to reflect software changes in user's requirements, to implement a system at a rapid speed as well as to efficiently manage the system in a maintenance phase and to easily change software. Moreover, the component-based system has a merit in development cost. However, existing component development methodology for implement of component-based system is inefficient in object identification for component identification. Moreover, the existing component development methodology also fails to provide any method to identify system component. It merely provides procedures and methods to identify business component focused on a whole system domain. In addition, it has another problem that it considerably relies on developer's experiences and intuitions for component identification. Therefore, according to this paper, RUP (Rational Unified Process) is applied from a requirement analysis phase to an object identification phase in order to improve the inefficiency of object identification. In addition, this paper procedures and methods for system component identification, and identifies business components based on the identified system component, rather than on the whole system domain. This paper also provides and applies cohesion metric and coupling metric so as to overcome the problem that component identification depends on developer's intuitions and experiences. Accordingly, the component identification method proposed in this paper, may identify components more effectively based on facility of object identification, functional reusability of components, traceability, and independence of components.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.43-51
• /
• 2020

The main purpose of protective facility for small military unit is to provide the protection of not all the weapons system but the near-miss bullet in Korean army. In particular about the small caliber bullets, especially KM80 in Korea, there were many studies that both of the experiential and structural design methods dose not reflect enough the military threat. For that reason, a new equation to calculate effective anti-piercing depths for RC slabs against small caliber bullets is proposed in earlier research with actual shooting test. But, the test only considers the strength of concrete without the thickness of concrete, types of aggregate, the angle of yaw of bullet, high-strength concrete, etc. Therefore, this study evaluated the ballistic resistance performance by thickness and proportion of magnetic aggregate of concrete. As a result, we identified two major statistical estimations that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage and the thickness and proportion of magnetic aggregate of concrete dose not effect on the protection ability of concrete structure.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.151-157
• /
• 2012

Even though the protective facility is well made with the development of medicine, the spatial dose within the radiation section could increase the exposure of the workers. The spatial dose is always present in distribution room within the Department of Nuclear Medicine, so the spatial dose of the interior distribution room is measured and analyzed for the prediction of the exposure dose. The spatial dose rate was $6.78{\pm}0.083{\mu}Sv/h$ in the $^{18}F$ distribution room of department of Nuclear Medicine, $9.248{\pm}0.013{\mu}Sv/h$ in $^{99m}Tc$, and $^{131}I$ distribution room. In addition, in case of $^{18}F$ distribution room, the yearly external exposure dose was $42.5{\mu}Sv$ when the nurse does IV in 1m in distance. It also showed that the spatial dose rate on the direction of right oblique showed higher than others by the standard of distribution window of distribution room. Therefore, the staying time of the workers should be short during distributing radiopharmaceuticals in the distribution room and the design of the distribution protection is necessary to reduce the exposure in the direction of right oblique of the protection. The utmost endeavors are required to reduce the worker's individual exposure dose while doing IV.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.15 no.1
• /
• pp.19-29
• /
• 2016

This study aims to find a direction for desirable space organization in future Korean kindergartens by analyzing the current status of space organization in Japanese kindergartens. This study includes comparisons and analyses of Korean and Japanese curricula, facility standards on the national level and standards of national subsidy, current numbers of kindergarteners and preschoolers, and changes in kindergarten facilities over the last 5 years. Six kindergartens each in Korea and Japan, which were constructed after 2011 or are recommended as being good in space organization and kindergarten planning, are selected. The contents of space organization analysis are 'entry and placement, outdoor space', 'space program,' and 'plan design and organization of unit space'. In conclusion, in terms of space organization, Korean and Japanese kindergartens are very similar to each other. However, Japanese kindergartens have more outdoor space about $9.75m^2$ and lot area about $11.89m^2$ than Korean kindergartens. The extra space was used to educate students in various contents regarding social network and physical activity. Furthermore, in Japan, special spaces such as "atelier classes" and "PTA" were used for various types of education. Based on the results of the study will be developed, such as specific models and guidelines for the improvement of facilities Korea kindergarten.

• Biomedical Science Letters
• /
• v.16 no.2
• /
• pp.75-82
• /
• 2010

The molecular epidemiological characteristics of methicillin-resistant Staphylococcus aureus (MRSA) isolates have demonstrated their genetic diversity and evolution. A total of 137 strains of MRSA clinical isolates was collected from Korean healthcare facility in 2007. The MRSA clinical isolates were analyzed by molecular typings (SCCmec element and agr locus typing), virule nce factor gene detections {(Panton-Valentine leukocidin (PVL), enterotoxin, exfoliative toxin and toxic shock syndrome toxin-1), and amplified fragment length polymorphism (AFLP)}. The MRSA clinical isolates were classified as SCCmec type II-agr type 1 (2 strains), type II-agr type 2 (79 strains), type III-agr type 1 (24 strains), type III-agr type 2 (2 strains), type IV-agr type 1 (27 strains), type IV-agr type 2 (2 strains), and non-typable (1 strain, agr type 3). Based on SCCmec types, SCCmec type II (95.1%) and III (88.5%) indicated higher multidrug resistance rate than SCCmec type IV (10.3%) (P<0.001). The most common enterotoxin genes were seg (83.8%), sei (83.1%), and sec (80.2%). The tst gene was present in 86 out of 137 (62.8%) MRSA isolates. All MRSA isolates were negative for PVL and exfoliative toxin genes. The combinations of toxin genes were observed in particular SCCmec types; 97.6% of SCCmec type II strains carried sec, seg, sei and tst genes, 73.0% of SCCmec type III strains carried sea gene, and 89.7% of SCCmec type IV strains carried sec, seg and sei genes. Each of the SCCmec types of MRSA isolates had distinct AFLP profile. In conclusion, SCCmec type II, agr type 1 and 2 have demonstrated to be the most common types in Korea, and the results indicated that the virulence factors are closely associated with their molecular types (SCCmec and agr types).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.855-860
• /
• 2011

We numerically simulated a dissolved air flotation (DAF) tank to predict the performance of the pilot facility. The flow was assumed to be two-dimensional and two-phase. The velocity distributions in the separation zones of differently shaped DAFs were compared to find the effect of the shape on the performance. The results showed that the typical flow pattern that appeared in a well-designed DAF-tank was generated in the separation zone of the base model. This flow pattern could be maintained while the baffle height was sufficiently tall regardless of the other geometric parameters. However, the baffle height and angle, the contact zone width, and the perforated plate affected the uniformity of the downward flow in the separation zone. Except for the baffle height, the base model used in this study showed a better uniformity of downward flow than did other models with different geometric parameters.

• Journal of Korea Port Economic Association
• /
• v.33 no.2
• /
• pp.97-109
• /
• 2017

The Terminal Operating Company (TOC) decides to replace the harbor cranes in order to increase revenue and profit through the improvement of unloading efficiency. To achieve this goal, substantial costs and efforts are necessary. However, the conative participation of harbor stakeholders is needed, because they will certainly be passionate enough when expected effects are obvious. The purpose of this study is to analyze the effect on stakeholders on direct and indirect cost saving when the cargo handling equipment is replaced. According to the analysis, a total cost saving of 6,561.8 million won will arise including a vessel chartering fee of 3,649.6 million won, a port facility fee of 1,528.8 million won, and fuel costs of 1,383.4 million won as direct effects. As indirect cost effects, a total cost saving of 3,107.0 million won will emerge including an environmental pollution cost of 2,134.8 million won and a freight inventory cost of 972.2 million won. Consequently, the replacement of harbor cranes in the TOC has positive effects on shipping companies, shippers, and the government in terms of costs and other aspects. The results of this study can be utilized as a basis to draw a conative cooperation of stakeholders on TOC's promotion of the harbor cranes replacement.

• Korean Journal of Hospice Care
• /
• v.5 no.1
• /
• pp.74-81
• /
• 2005

Purpose: The purpose of this study is to help apply spiritual care in clinics by testing whether spiritual support like prayer and praise, which is appled on a patient who has been cared for by Facility Hospice can have an effect on their physical pain, emotional anxietv, loneliness and well being. Method: This research was done on a subject patient who had been hospitalized in Saemmul from Jan, 2002 to June, 2003, and who could easily communicate. Questionnaire of quality of life, they had this test from the date of admission into the hospital 1week, 3week, 5week later. The Target was 182 people for the hospital data, 124 people after one week, 84 people after 3 weeks and 54 people after for 5 weeks later. For statistics, SPSS for Window(SPSS inc. ver.10), student T-test and one way ANOVA were used. The interrelation between pray and pain was analyzed by the "Pearson correlation". In case where the P-value was below 0.05, we concluded it had statistical-value. Results: When we compared both the party which had a low degree of peace by prayer and praise and the B party which had the highest degree, B party had an increasing tendency for less anxiety and loneliness and more well-being. Each of the data 0, 1, 3 and 5 week showed visible difference between both parties. Conclusion: First, in case that a late cancer patient is hospitalized, the difference for tranquility and pain control by prayer and praise is not noticeable. While, 1 and 3 weeks later, the difference is visible, so we concluded the relationship between the cancer patient's spiritual tranquility and physical pain are closely related with each other. Also the patients who are in spiritual peace by prayer and praise can control the pain better than the other patients. Second, because the patient who can feel calm from the data of being admitted into the hospital is mentally calm, both party's difference is noticeable in each period of the 1, 3 and 5th week. Compared with other patients, the object patients who have spiritual tranquility will have less anxiety and loneliness and more tranquility.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.139-146
• /
• 2017

This study was an attempt to review of tuberculosis control projects supported by(Official Development Assistance: ODA) and to describe the meaning of the influencing factors. Also, the study aims to determine the exit strategies of donor countries to sustain these projects. The research was conducted reviewing of tuberculosis-related reports and documents, and understood the tuberculosis control projects in Philippines. There were 14 people who participated, and explored the sustainability limits using in-depth interviewing and observation method. Data from interviews and participant observations were analyzed to the phenomenological method by Colaizzi(1978). A total 4 categories were grouped on the final. The finding shows factors that affect the sustainability of these tuberculosis control projects within Philippines supported by ODA have been divided and explained as follow; "limit of workforce", "limit of finance", "limit of facility and equipment", "limit of participation". To sustain these projects, the following alternative plans have been exemplified; "strengthening professionalism", "strengthening education and public relations", "activated strategy for community involvement", "matching funds for financing". Furthermore, the study of integrated tuberculosis control projects will be needed.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.136-140
• /
• 2011

Mechanical properties of degraded materials must be measured for evaluating the integrity of the facilities operating at high temperature. In fact it is complicated to obtain the different degraded specimens from an operating facility. Specimens of 1Cr-0.5Mo steel prepared by the isothermal heat treatment at $700^{\circ}C$ were tested, which has been widely used as tubes for heat exchangers and as plates for pressure vessels. The magnetic properties and Rockwell hardness (HRB) were measured at room temperature. The peak interval of Barkhausen noise envelope (PIBNE), coercivity, and hardness decreased with the increase of degradation. The magnetic and mechanical softening of matrix is likely to govern the properties of the specimen more than the hardening of grain boundary by carbide precipitations. The degradation of test material may be determined by the linear correlation of PIBNE and HRB. Degradation of 1Cr-0.5Mo steel could well be nondestructively evaluated by PIBNE measured with surface type probe.