• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.17-24
• /
• 2015

In this study, the effect of delignification degree of Korean white pine wood on fibrillation efficiency by wet disk-milling (WDM) and the properties of thus-obtained microfibrillated cellulose (MFC) were investigated. The effect on the tensile properties of nanopaper was also investigated. The delignification degree was adjusted by repeating 'Wise' method using sodium chlorite and acetic acid. The increase in delignification degree improved fibrillation efficiency, showing the smaller nanofiber dimension at the shorter WDM time. The filtration time of MFC water suspension was increased by the increase of WDM cycles. Tensile strength and elastic modulus of the nanopaper were increased by increasing delignification degree and disk-milling cycles.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.14-20
• /
• 2018

Wet clutches in an automatic transmission enable the transmission of the engine power by the frictional torque experienced and noted between disk and plates. Since the clutch frictional torque considerably affects the shift quality of an automatic transmission as well as the durability of the machinery, its friction characteristics must be carefully examined to meet the design requirements. The SAE No. 2 friction test machine is a well-known standard to evaluate mainly the friction characteristics of plate clutches along with the required automatic transmission fluids. This paper reviews the experimental analysis of the wet clutch friction characteristics by using the exclusively developed clutch test machine which is capable of controlling the clutch test procedure, in accordance with the applicable test standard and processing of the experimental data automatically. As the clutch test machine is designed for the accommodation of dual clutches which is applied to the real transmission, it can evaluate not only the clutch friction characteristics, but also an actuation performance of a measured clutch piston. In respect to friction characteristics involving dynamic friction coefficients, the energy absorbed in a clutch disk and the recorded temperatures of clutch plates during braking actions and procedures are also investigated. Additionally, the change of friction coefficients by the use of the repeated clutch application is also observed with the endurance test functions of an accurately calibrated and dedicated clutch test machine.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.61-69
• /
• 2011

In this paper, the factors affecting the dynamic characteristics of a polyurethane spring restoring disk bearing are analysed to predict the dynamic behavior of the bearing. The prediction results and the test results are compared. The Young's modulus of the polyurethane spring, which varies according to strain of spring and the friction coefficient, of PTFE (PolyTetraFluoroEthylene), which varies according to the velocity and pressure of PTFE, are considered as the factors influencing the dynamic characteristics. W-PTFE virgin products are used and polyurethane springs are produced for the tests. The equation related to changing the friction coefficient and the modulus of elasticity are obtained through an inverse estimation of the test results. The estimation results, considering the factors affecting the dynamic characteristics, simulate the test results more appropriately than the estimation without the consideration of those factors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.903-906
• /
• 2011

The electroplating and electro-less plating methods have been applied for the high density chip interconnect of the Copper Pillar Tin Bump (CPTB) preparation. The CPTB was prepared, which had been electroplated about $100{\mu}m$ pitch of copper layer firstly, and then the Tin layer was deposited on the copper pillar surface to protect the oxidation of it. It was also very important to get uniform thickness of electroplated copper layer, though it was difficult and sensitive. In order to control the thickness distribution, it was examined that the current separating disk of Insulating Gate with a hole in the center was installed between electrodes. The current flows through the center hole of the Insulating Gate in the cylindrical electroplating bath and the other parts were blocked to protect current flowing. The main current flowed through the center hole of the Insulating Gate directly to the opposite electrode of wafer disk. As the results, it was verified that the copper layer was thick in the center part of wafer disk with distribution of thinner to the outer part toward edge.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.28-38
• /
• 2013

During the past decades, the B+-tree has been most widely used as an index file structure for disk-resident databases. For the disk based B+-tree, a node update can be cheaply performed just by modifying its associated disk page in place. However, in case that the B+-tree is stored on flash memory, the traditional algorithms of the B+-tree come to be useless due to the prohibitive cost of in-place updates on flash memory. For this reason, the earlier schemes for flash memory B+-trees usually take an approach that saves B+-tree changes from real-time updates into extra temporary storage. Although that approach can easily prevent frequent in-place updates in the B+-tree, it can suffer from a waste of storage space and prolonged search times. Particularly, it is not allowable to process range searches on the leaf node level. To resolve such problems, we devise a new scheme in which the leaf nodes and their parent node are stored together in a single flash block, called the p-node block.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.1
• /
• pp.62-66
• /
• 2007

Plant Regeneration via organogenesis from leaf disk of Korean dandelion was investigated. Leaf disk cultured on MS medium with various combinations of BA (0-4 mg/L) and 2,4-D (0-1 mg/L). Shoot regeneration from leaf explant was observed after 3 weeks of culture. The highest shoot regeneration frequency from leaf disk was obtained with 2 mg/L BA. To analyze the effect of leaf age along shoot formation, we measured number of shoots per explant, shooting rate, fresh and dry weight of leaf explant. The highest number of shoots (11.5) per explant were obtained leaf from 7 weeks old plantlets after seed germination. The regenerated shoots were transferred in 1/2 MS medium with 0.5 mg/L NAA for root formation. Regeneratied plantlets thought organogenesis were growing to whole plants in the pots with acclimation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1027-1034
• /
• 2014

The shear stress on a surface due to the thin film fluid flow is an important issue. In case of a rotating disk, the fluid is delivered to the edge of the disk by centrifugal force, which acts as a body force on the fluid. Wear of a surface is affected by the shear stress acting on the surface and curvature. In this study, we utilize computational fluid dynamics software to model the ratio of curvature and local shear stress on solid surfaces. The key goal of the study is to determine an optimized curvature for the thin film fluid flow on a solid surface in order to minimize the local shear stress affecting the wear of this surface. Our results on the effects of curvature will be utilized for the design of devices that utilize thin film fluid flow on a solid surface, such as rotating-disk spray systems and thin film coating.

• Journal of KIISE:Databases
• /
• v.36 no.6
• /
• pp.455-465
• /
• 2009

Suffix trees are widely used in similar sequence matching for DNA. They have several problems such as time consuming, large space usages of disks and memories and data skew, since DNA sequences are very large and do not fit in the main memory. Thus, in the paper, we present a space efficient indexing method called SENoM, allowing us to build trees without merging phases for the partitioned sub trees. The proposed method is constructed in two phases. In the first phase, we partition the suffixes of the input string based on a common variable-length prefix till the number of suffixes is smaller than a threshold. In the second phase, we construct a sub tree based on the disk using the suffix sets, and then write it to the disk. The proposed method, SENoM eliminates complex merging phases. We show experimentally that proposed method is effective as bellows. SENoM reduces the disk usage less than 35% and reduces the memory usage less than 20% compared with TRELLIS algorithm. SENoM is available to query efficiently using the prefix tree even when the length of query sequence is large.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.4
• /
• pp.431-437
• /
• 2018

Acinetobacter baumannii is categorized as a red alert pathogen that is increasingly associated with a high mortality rate in infected patients because of its resistance to extensive antibiotics. This study evaluated the antibacterial activities of some essential oils (tee tree, rosemary, and lavender oils) against 18 clinical isolates of multidrug-resistant A. baumannii (MRAB). The carbapenemase screening Hodge test showed that all 20 strains of A. baumannii were resistant to imipenem. The identification of multidrug-resistant microbes was carried out using the VITEK system. The antimicrobial activity of essential oils was tested by a disk diffusion method against MRAB. In the disk diffusion method, tea tree showed the largest increase in inhibition size compared to lavender oil, and rosemary had no antibacterial effect. These results proved the antimicrobial effect of multidrug resistance A. baumannii. Tee tree oil would be a useful alternative natural product for the treatment and prevention of most common human pathogens and MRAB infections. This is expected to be used as an antimicrobial agent, such as hand disinfectant using natural essential oil in the future.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.2
• /
• pp.99-108
• /
• 2021

The study reports the clinical case of a patient with lower extremity weakness and gait disturbance treated with Korean medicine treatments including Chuna therapy. The patient suffered lower extremity weakness and gait disturbance with diagnosis of lumbar disk herniation and spinal stenosis. As a treatment, the doctor applied Chuna therapy, herbal medicine, acupuncture, pharmacopuncture, cupping and moxa. The effect of treatment was evaluated by numeral rating scale (NRS), self-walkable distance, functional independence measure (FIM), Oswestry disability index (ODI) and manual muscle test (MMT). NRS decreased from 6 to 4 at the leg. Self-walkable distance increased from 0 m to 10 m, FIM increased 85 to 96 points while ODI decreased 64% to 54%. MMT of hip flex and knee extension improved from grade 3+, grade 3 to grade 4, respectively. Korean medicine treatment can be effective for patients who suffer lower extremity weakness and gait disturbance due to lumbar disk herniation and spinal stenosis. Further clinical studies are required to verify these findings.