Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Design of Reduced Shear Stress with High-Viscosity Flow Using Characteristics of Thin Film Flow on Solid Surfaces

완전접촉 경계면 위의 박막유동 특성을 이용한 고점도 전단유동에 따른 표면응력 감소 설계

  • Received : 2014.05.14
  • Accepted : 2014.07.21
  • Published : 2014.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The shear stress on a surface due to the thin film fluid flow is an important issue. In case of a rotating disk, the fluid is delivered to the edge of the disk by centrifugal force, which acts as a body force on the fluid. Wear of a surface is affected by the shear stress acting on the surface and curvature. In this study, we utilize computational fluid dynamics software to model the ratio of curvature and local shear stress on solid surfaces. The key goal of the study is to determine an optimized curvature for the thin film fluid flow on a solid surface in order to minimize the local shear stress affecting the wear of this surface. Our results on the effects of curvature will be utilized for the design of devices that utilize thin film fluid flow on a solid surface, such as rotating-disk spray systems and thin film coating.

회전원판 위 표면에 작용하는 유동 전단응력은 표면마모를 발생시키는 주원인이다. 유체는 원심력에 의해 가장자리까지 자유표면을 갖는 박막유동으로 전달된다. 표면마모는 받음각 또는 곡률에 따른 전단응력 정도에 비례하여 차이를 보이게 된다. 전산해석을 통한 속도분포 기울기로 받음각에 기준한 곡률의 전단응력비를 비교하였다. 곡률반경 변화에 따른 전단유동의 응력감소를 모델링하여 표면마모를 효율적으로 줄일 수 있는 최적구간을 결정하는 것이 본 연구의 주제이며, 이 연구결과는 회전무화나 박막코팅과 같은 박막유동을 활용하는 기구의 최적설계에 적용될 수 있다.

Keywords

References

  1. Hong, H. E., Ahn, H. T. and Myung, H. J., 2012, "An Efficient Incompressible Free Surface Flow Simulation Using CPU," J. Comput. Fluids Eng., Vol. 17, No. 2, pp. 35-41. https://doi.org/10.6112/kscfe.2012.17.2.035
  2. Sung, J. Y., Choi, H. G. and Yoo, J. Y., 1995, "A Study on the Thin Liquid Film Flow with Free Surface," KSME Fall Annual Meeting 1995, pp. 252-257.
  3. Hong, H. E., Ahn, H. T. and Myung, H. J., 2012, "Characterizing Liquid Flim Thickness in Spinning Disc Reactors," J. Comput. Fluids Eng., Vol. 17, No. 2, pp. 35-41. https://doi.org/10.6112/kscfe.2012.17.2.035
  4. Shevchuk, I. V., 2009, Convective Heat and Mass Transfer in Rotating Disk Systems, Springer, New York, pp. 163-189.
  5. Jang, Y. J., 2011, "The Near-Wall Flow Analysis using Wall Function in LES Code(FDS5)," J. Comput. Fluids Eng., Vol. 2011, No. 10, pp. 1594-1600.
  6. Choi, W. C., Seo, Y. M., Choi, S. K. and Chung, K. M., 2009, "Development of 3-equation Turbulence Model for Free Shear Flow and Channel Flow," KSME Fall Annual Meeting 2009, Vol. 2009, No. 11, pp. 2125-2130.
  7. Kim, B. J., Jeong, E. S. and Kim, J. H., 1998, "Effects of Interfacial Shear Stress on Laminar-Wavy Film Flow," Trans. Korean Soc. Mech. Eng. B, Vol. 22, No. 7, pp. 992-1000.
  8. Yoon, S. H. and Jeong J. T., 2011, "Study of Stokes Flow Past a Vertical Plate in a Two-Dimensional Channel," Trans. Korean Soc. Mech. Eng. B, Vol. 35, No. 6, pp. 609-615. https://doi.org/10.3795/KSME-B.2011.35.6.609
  9. Jeong, J. D., Cho, S. G and Lee, C. H., 2006, "Behavior of a Heavy Particle in the Shear Flow Near a Flat Wall," Trans. Korean Soc. Mech. Eng. B, Vol. 30, No. 8, pp. 806-817. https://doi.org/10.3795/KSME-B.2006.30.8.806
  10. B. H. Kim, Beskok, A. and Cagin, T., 2010, "Viscous Heating in Nanoscale Shear Driven Liquid Flows," Microfluidics and Nanofluidics, Vol. 9, No. 3, pp. 31-40. https://doi.org/10.1007/s10404-009-0515-5
  11. Kim, C. N., Oh, T. Y., Choi, M. J. and Jung, S. D., 2005, "Elastic Motion of the Blood Vessel and Wall Shear Stress in Carotid Artery with Stenosis," Journal of the Korean Society of Precision Engineering, Vol. 22, No. 9, pp. 179-187.
  12. Byeon, H. J., Ha, H. J. and Lee, S. J, 2011, "Experimental Estimation of Wall Shear Stress in a Stenotic Rat Mesentery Vessel," KSME Fall Annual Meeting 2011, Vol. 2011, No. 10, pp. 3075-3077.
  13. Hierck, B. P., Heiden, K. V., Poelma, C., Westerweel, J., Poelmann, R. E., 2008, "Fluid Shear Stress and Inner Curvature Remodeling of the Embryonic Heart, Choosing the right lane!" The Scientific World JOURNAL, Vol. 8, pp. 212-222. https://doi.org/10.1100/tsw.2008.42
  14. Choi, S. H. and Lee. Y., 1997, "Skin Friction Measurements using He-Ne Laser," Trans. Korean Soc. Mech. Eng. B, Vol. 21, No. 7, pp. 939-947.
  15. Kim, J. T. and Rhee, K. H., 1995, "A Study on the Flow Inside the Laminar Wavy Liquid Film using Flow Visualization," KSME Fall Annual Meeting 1995, pp. 263-267.
  16. Kang, S. J. and Lee, Y., 1999, "Experimental Study on the Global Skin Friction Measurements Using the Interferometry," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 27, No. 4, pp. 128-134.
  17. Lim, S. H. and Choi, H., 1997, "Optimal Shape Design using a Mathematical Theory in Laminar Flow," KSME Spring Annual Meeting 1997, pp. 357-362.
  18. Park, G. J., Kwak, H. S., Son, B. C. and Kim, K. J., 2007, "Numerical Investigation of the Flow in a Micronozzle for Dispensing a Highly Viscous Sealant," Journal of Computational Fluids Engineering, Vol. 12, No. 4, pp. 54-60.
  19. Choi, Y. and Lee, D, 2012, "A Study on Effect of Surface Texturing on Wall Shear Stress Distribution of Engine Piston Ring," KSPE Fall Annual Meeting 2012, Vol. 17, No. 2, pp. 933-934.
  20. Lim, Y. J., Kim, I. T. and Kwak, K. H., 2011, "Evaluation of Permanent Deformation Characteristics in Crushed Subbase Materials using Shear Stress Ratio and Large Repeated Triaxial Compression Test," Journal of the Korean Society of Road Engineers, Vol. 13, No. 4, pp.41-50. https://doi.org/10.7855/IJHE.2011.13.4.041
  21. Park, B. S. and Kim, B. H., 2013, "Design of Rotary Atomizer using Characteristics of Thin Film Flow on Solid Surfaces," Trans. Korean Soc. Mech. Eng. A, Vol. 37, No. 12, pp. 1473-1482. https://doi.org/10.3795/KSME-A.2013.37.12.1473
  22. Young, Munson, Okiishi and Huebsch, 2007, A Brief Introduction to FLUID MECHANICS, 4th, John Wiley & Sons, New York, pp. 256-259.