• 대한전자공학회논문지SD
• /
• 제45권9호
• /
• pp.33-40
• /
• 2008

메모리의 속도가 빠르게 향상됨에 따라, 고속 메모리를 테스트하기 위한 테스트 장비가 요구되고 있다. 특히 고속 메모리를 사용자가 원하는 명령어를 그대로 사용하여 효율적으로 테스트할 수 있도록 패턴을 만들어 내는 알고리즘 패턴 생성기(ALPG)가 필요하다. 본 논문에서는 고속 메모리 테스트를 위한 새로운 병렬 ALPG를 제안한다. 제안하는 ALPG는 명령어 분석기를 통해 사용자가 실행하고자 하는 명령어를 그대로 사용하여 고속 메모리 테스트를 위한 패턴을 생성할 수 있다.

• 아동학회지
• /
• 제6권1호
• /
• pp.3-16
• /
• 1985

The purpose of this study was the application of sequential analysis to mother-infant interaction data, with particular reference to goodness of fit. The subjects of this study were 22 7- to 16-month-old infants(12 girls and 10 boys) and their mothers. Each mother-infant dyad was videotaped in a 5-min free-play session in the playroom. The videotaped data was transcribed on the behavioral checklist every 3 seconds. The recorded raw data were lagged by one time interval (3 sec.). Transitional probabilities from behavior at time t-1 to behavior at time t were gathered. The statistical analysis of frequency data and transitional probabilities consisted of Z test, t test, and sign test. It was found that regarding 1) direction of effect: the transitional probability of infant vocalization following maternal vocalization was significantly higher than the reverse; the transitional probability of a 'Coacting State' following a 'Mother Active State' was significantly higher than the reverse; the probability of a 'Mother Active State' following 'Quiescent State' was significantly higher than that of a 'Coacting State' following an 'Infant Active State'; 2) sex differences: male infants' transitional probability from an 'Infant Active State' to a 'Quiescent State' was significantly higher than that of female infants; 3) age differences: more than younger infants older infants had higher transitional probabilities from a 'Mother Active State' to a 'Coacting State', from a 'Parallel State' to a 'Coacting State', and from a 'Quiescent State' to a 'Parallel State'. These showed goodness of fit for sex and age differences, particularily for direction of effect.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1229-1234
• /
• 2008

In this work, ultra high-voltage (17 - 50 kV AC), reliable 80 pF mica capacitors for partial discharge system application were investigated. Mica was used as the dielectric of the capacitors. Using the conservative design rule, over 3 individual $50\;{\mu}m$ thick mica sheets with a size of 30mm{\times}35mm were used with lead foils to form a parallel capacitor element and 20 mica sheets were interleaved with lead foils to form a series stack of parallel capacitor element to meet the requirements of the capacitors. The dimensions of the fabricated 80 pF capacitors for 17 kV AC and 50 kV AC were $90\;mm{\times}90\;mm$ and $95\;mm{\times}180\;mm$, respectively. The high-frequency characteristics of the capacitance (C) and dissipation factor (D) of the developed capacitors were measured using a capacitance meter. The developed capacitors exhibited C of 79.5 - 87.5 pF, had D of 0.001% over the frequency ranges of 150 kHz to 50 MHz, had a self-resonant frequency of 65 MHz, and showed results comparable to those measured for the capacitors prepared recently by $Adwel^{Tm}$. The developed capacitors also showed excellent characteristics for thermal shock test and temperature cycling test.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.34-44
• /
• 2003

An advanced aeroelastic analysis using a computational structural dynamics (CSD), finite element method (FEM) and computational fluid dynamics (CFD) is presented in this Paper. A general aeroelastic analysis system is originally developed and applied to realistic design problems in the transonic flow region, where strong shock wave interactions exist. The present computational approach is based on the modal-based coupled nonlinear analysis with the matched-point concept and adopts the high-speed parallel processing technique on the low-cost network based PC-clustered machines. It can give very accurate and useful engineering data on the structural dynamic design of advanced flight vehicles. For the nonlinear unsteady aerodynamics in high transonic flow region, Euler equations using the unstructured grid system have been applied to easily consider complex configurations. It is typically shown that the advanced numerical approach can give very realistic and practical results for design engineers and safe flight tests. One can find that the present study conducts a virtual flutter flight test which are usually very dangerous in reality.

• ETRI Journal
• /
• 제32권1호
• /
• pp.73-83
• /
• 2010

Combinatorial testing has been an active research area in recent years. One challenge in this area is dealing with the combinatorial explosion problem, which typically requires a very expensive computational process to find a good test set that covers all the combinations for a given interaction strength (t). Parallelization can be an effective approach to manage this computational cost, that is, by taking advantage of the recent advancement of multicore architectures. In line with such alluring prospects, this paper presents a new deterministic strategy, called multicore modified input parameter order (MC-MIPOG) based on an earlier strategy, input parameter order generalized (IPOG). Unlike its predecessor strategy, MC-MIPOG adopts a novel approach by removing control and data dependency to permit the harnessing of multicore systems. Experiments are undertaken to demonstrate speedup gain and to compare the proposed strategy with other strategies, including IPOG. The overall results demonstrate that MC-MIPOG outperforms most existing strategies (IPOG, IPOF, IPOF2, IPOG-D, ITCH, TConfig, Jenny, and TVG) in terms of test size within acceptable execution time. Unlike most strategies, MC-MIPOG is also capable of supporting high interaction strengths of t > 6.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1017-1024
• /
• 2009

In the past few decades, the rockfill embankment dam, which has superior workability and economy, has become a major trend. In Korea, most of the embankment dams are rockfill dams, but recently, in response to the demand for sustainable development and environmentally-friendly water resource development, the sand and gravel in streams has become a major construction material for dams, rather than the non-economic rockfill, and its application examples have also increased. In this study, a large triaxial test was performed, with construction samples of different maximum sizes, in parallel with the grading method at the 'B Dam' construction site in Korea, and the effects of the different maximum sizes on the strain of the dam construction material and on the shear strength characteristics were analyzed to provide the basic data for determining the strength characteristics of the coarse-grained materials by the maximum size.

• 대한산업공학회지
• /
• 제35권4호
• /
• pp.257-265
• /
• 2009

This paper considers the hybrid flow shop scheduling problem for the objective of minimizing the number of tardy jobs. In hybrid flow shops, each job is processed through multiple production stages in series, each of which has multiple identical parallel machines. The problem is to determine the allocation of jobs to the parallel machines at each stage as well as the sequence of the jobs assigned to each machine. Due to the complexity of the problem, we suggest search heuristics, tabu search and simulated annealing algorithms with a new method to generate neighborhood solutions. In particular, to evaluate and select neighborhood solutions, three surrogate objectives are additionally suggested because not much difference in the number of tardy jobs can be found among the neighborhoods. To test the performances of the surrogate objective based search heuristics, computational experiments were performed on a number of test instances and the results show that the surrogate objective based search heuristics were better than the original ones. Also, they gave the optimal solutions for most small-size test instances.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.140-150
• /
• 2006

본 논문은 SOC 내부의 다양한 코어들을 효율적으로 테스트하기 위한 하드웨어 구조에 초점을 두고 있다. 기존의 한 번에 한 개의 코어만을 순차적으로 테스트하는 방식은 많은 테스트 시간을 요구한다. 이를 보완하고자 본 논문에서는 병렬적으로 여러 코어를 테스트할 수 있는 S-TAM 구조 및 컨트롤러를 제안한다. S-TAM 구조는 테스트 버스 공유 방식을 이용하여 브로드캐스트 방법을 지원하며 이를 기반으로 하여 임의의 코어만을 선택적으로 테스트할 수도 있다. 이뿐 아니라 S-TAM 컨트롤러는 IEEE 1149.1 및 IEEE 1500 등과 같은 서로 상이한 테스트 기반을 통해 구현된 다양한 코어들을 동시에 제어함으로써 효과적인 SOC 테스트를 가능하게 한다.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.352-362
• /
• 2005

Statement of problem. Accurate impression is essential to success of implant prostheses. But there have been few studies about the accuracy of fixture-level impression techniques in internal connection implant systems. Purpose. The purpose of this study was to compare the accuracy of two fixture-level impression techniques in two conditions (parallel and divergent) and to assess the effect of tightening sequences and forces on stresses generated on superstructures in internal connection implant system (Astra Tech). Material and methods. Two metal master frameworks made from two abutments (Cast-to Abutment ST) each and a corresponding, passively fitting, dental stone master cast with four fixture replicas (Fixture Replica ST) were fabricated. Ten dental stone casts for each impression techniques (direct unsplinted & splinted technique) were made with vinyl polysiloxane impressions from the master cast. Strain gauges for each framework were fixed midway between abutments to measure the degree of framework deformation on each stone cast. Pairs of strain gauges placed opposite each other constituted one channel (half Wheatstone bridge) to read deformation in four directions (superior, inferior, anterior, and posterior). Deformation data were analyzed using one-way ANOVA and the Tukey test at the .01 level of significance. And the effect of tightening sequences (right-to-left and left-to-right) and forces (10 Ncm and 20 Ncm) were assessed with ten stone casts made from parallel condition by the splinted technique. Deformation data were analyzed using paired t-test at the .01 level of significance. Conclusions. Within the limitations of this study, the following conclusions could be drawn. 1. Frameworks bent toward the inferior side on all casts made by both direct unsplinted and splinted impression techniques in both parallel and divergent conditions. 2. There was no statistically significant difference of accuracy between the direct unsplinted and splinted impression techniques in both parallel and divergent conditions (P>.01). 3. There was no statistically significant difference of stress according to screw tightening sequences in casts made by the splinted impression technique in parallel condition (P>.01). 4. Greater tightening force resulted in greater stress in casts made by the splinted impression technique in parallel condition (P<.01).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.360-360
• /
• 2010

반도체 산업은 지속적인 design rule 감소로 인해 직접도 및 Pin Count가 점점 증가함에 따라 보증해야할 회로의 수와 기능이 더불어 증가하고 있으며, 그 중 Test Cost 감소 방법 확보가 시급하게 되었다. 이에 따라 Test Cost 감소와 직결된 Test Time 감소 방법이 다양하게 제시되고 연구되고 있다. 본 논문은 Test Time의 한 부분인 반도체 검사 장비 (Automatic Test Equipment)의 효율적인 제어 방법을 제공함으로써, 관련 분야의 이해를 돕고자 한다.