• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.269-272
• /
• 2008

This paper deals with damage patterns of cabinet panel for low voltage deteriorated by flame. In order to analyze damage patterns, we used Metallurgical Microscope, x-ray system, and Fourier Transform Infrared spectroscopy. Firstly, Metallurgical microscope was used for analysis of electrical causes, such as electric short and overload. Secondly, X-ray system was used for analysis of internal characteristics of circuit breakers. Lastly, Fourier Transform Infrared spectroscopy was used for analysis of damage direction by flame. The following results were obtained.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.66-71
• /
• 2001

A sectional analysis of trunk-lid carried out by using the equilibrium approach based on the force balance together with geometric relations and plasticity theory. In computing a force balance equation, it is required to define a geometric curve approximating the shape of sheet metal at any step of deformation from the interaction between the die and the deformed sheet. The trunk-lid panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the three-dimensional shape composition of the two-dimensional analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.569-576
• /
• 2003

Fundamental issues in static finite element analysis of reinforced concrete panel subjected to biaxial tensile loads are discussed. This paper is trying to bring our attention to the appropriate use of concrete material models such as cracking criteria, tension stiffening model and the steel models which are basically used in the nonlinear finite element analysis of reinforced concrete panels. We mainly investigate the sensitivity of available material models and finite element technologies to the finite element analysis result using our recent reinforced concrete panel experiment result. Throughout this study, we found that the judicious use of the material models and finite element technologies with the sound understanding of structural characteristics can only guarantee the accurate prediction of panel behaviour.

• 한국음향학회지
• /
• 제18권2호
• /
• pp.32-39
• /
• 1999

본 논문에서는 2차원 구조물의 고주파수 대역 진동 해석을 위하여, 원형파를 기본으로 한 레이 추적 기법(RTM)의 특성에 관한 논의를 하였다. 발산되는 원형파를 묘사하는 레이튜브 개념을 사용하여, 연성경계에서 입사파, 전달파, 그리고 반사파가 경계조건을 만족하도록 관계식을 유도하였다. 제안된 레이 모델을 직렬 배열 연결 평판 구조물에 적응하였는데, 직렬로 배열된 2개의 연결된 평판, 3개 및 4개의 연결된 평판에 대한 해석 결과를 통계적 에너지 해석법(SEA) 및 파동 인텐시티 해석법(WIA)과 비교하여 보았다. 그 결과, SEA 보다 개선된 예측을 할 수 있으며, WIA와는 비슷한 예측 성능을 보임을 확인할 수 있었다. 또한, 제안된 RTM을 사용하면 진동 에너지와 진동 인텐시티의 대략적 공간 분포를 알 수 있는 장점이 있다. 제안된 RTM은 2차원 연성 구조물의 고주파수 진동 해석을 위한 유용한 기법으로써 쓰일 것으로 기대된다.

• 대한토목학회논문집
• /
• 제37권2호
• /
• pp.451-457
• /
• 2017

본 연구에서는 폭발하중을 받는 슬래브-기둥 접합부의 거동을 해석적으로 분석하였다. 슬래브-기둥의 거동을 분석하기 위해 유한요소해석프로그램 LS-DYNA를 사용하여 폭발해석을 수행하였다. 대상 접합부의 형태는 일반적인 내부기둥형태의 슬래브-기둥 접합부와 기둥주위에 드롭패널(drop panel)을 보강한 접합부로 설정하였다. 또한, 슬래브에 의한 기둥의 구속도에 따라 내부기둥, 외부기둥 그리고 모서리기둥 시험체를 모델링하여 비교분석이 수행되었다. 해석결과는 접합부의 파괴형상, 단위부재의 거동 등을 포함하고 있다. 해석결과 드롭패널을 보강한 경우 슬래브-기둥 접합부의 거동이 향상되는 것을 확인하였으며 슬래브에 의한 기둥의 구속도가 감소할수록 거동이 저하되는 것을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.315-327
• /
• 2002

본 연구의 목적은 패널영역을 고려한 2차 탄소성힌지해석을 이용한 평면 강뼈대구조물의 이산화 최적설계알고리즘을 개발하는데 있다. 강뼈대구조물의 일반적인 해석은 구조물의 거동에서 패널영역 변형의 효과를 고려하지 않는다. 최적설계의 목적함수는 강뼈대구조물의 중량을 함수로 취하였으며, 제약조건식은 하중저항계수법(AISC-LRFD1994)시방규정을 근거로 하였다. 강뼈대구조물의 해석에서 현실적인 모델 사용의 중요성을 입증하기 위해 접합부 모델에서 패널영역을 고려하지 않은 수치해석과의 비교로부터 이 모델의 타당성이 판명되어진다. 개발된 알고리즘은 범용 프로그램인 SAP2000의 치적설계결과와 비교하여 본 연구에서 개발된 최적화 알고리즘의 타당성을 입증하였다. 이 연구의 결과는 일반적인 강뼈대구조물의 설계방법보다 패널영역의 거동을 고려한 최적설계 알고리즘이 더 경제적인 설계라는 것을 나타내었다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.84-96
• /
• 2022

In the worst case, a temporary ignition source (also known as transient combustibles) between two electrical panels can damage both panels. Mitigation strategies for electrical panel fires were previously developed using fire modeling and risk analysis. However, since they do not comply with deterministic fire protection requirements, it is necessary to analyze the boundary values at which combustibles may damage targets depending on various factors. In the present study, a sensitivity analysis of input variables related to the damage threshold of two electrical panels was performed for dimensionless geometry using a Fire Dynamics Simulator (FDS). A new methodology using a damage evaluation map was developed to assess the damage of the electrical panel. The input variables were the distance between the electrical panels, the vertical height of the fuel, the size of the fire, the wind speed and the wind direction. The heat flux was determined to increase as the vertical distance between the fuel and the panel decreased, and the largest heat flux was predicted when the vertical separation distance divided by one half flame length was 0.3-0.5. As the distance between the panels increases, the heat flux decreases according to the power law, and damage can be avoided when the distance between the fuel and the panel is twice the length of the panel. When the wind direction is east and south, to avoid damage to the electrical panel the distance must be increased by 1.5 times compared to no wind. The present scale model can be applied to any configuration where combustibles are located between two electrical panels, and can provide useful guidance for the design of redundant electrical panels.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.187-190
• /
• 2001

Response surface method is applied to evaluate the reliability of laminated composite panels. Since the linear and nonlinear first-ply failure load are computed using deterministic finite element analysis, new probabilistic finite element analysis is not necessary. Tsai-Wu criterion is used to construct the limit state suface. Material properties, layer thickness and lamina strengths of laminated composite panel are treated as random design variables. feasibility and accuracy of current method is validated using Monte-Carlo method Which perform thousand times of finite element analysis directly.

• 한국해양공학회지
• /
• 제12권1호
• /
• pp.10-22
• /
• 1998

In the present work the elastic-plastic FE formulations using dynamic explicit time integration schemes are used for numerical analysis of a large auto-body panel stamping processes. For analyses of more complex cases with larger and more refined meshes, the explicit method is more time effective than implicit method, and has no convergency problem and has the robust nature of contact and friction algorithms while implicit method is widely used because of excellent accuracy and reliability. The elastic-plastic scheme is more reliable and rigorous while the rigid-plastic scheme require small computation time. In finite element simulation of auto-body panel stamping processes, the roobustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry conditions. The performnce of the dynamic explicit algorithms are investigated by comparing the simulation results of formaing of complicate shaped autobody parts, such as a fuel tank and a rear hinge, with the experimental results. It has been shown that the proposed dynamic explicit elastic-plastic finite element method enables an effective computation for complicated auto-body panel stamping processes.

• Steel and Composite Structures
• /
• 제19권4호
• /
• pp.1011-1033
• /
• 2015

In this article, large amplitude bending behaviour of laminated composite flat panel under combined effect of moisture, temperature and mechanical loading is investigated. The laminated composite panel model has been developed mathematically by introducing the geometrical nonlinearity in Green-Lagrange sense in the framework of higher-order shear deformation theory. The present study includes the degraded composite material properties at elevated temperature and moisture concentration. In order to achieve any general case, all the nonlinear higher order terms have been included in the present formulation and the material property variations are introduced through the micromechanical model. The nonlinear governing equation is obtained using the variational principle and discretised using finite element steps. The convergence behaviour of the present numerical model has been checked. The present proposed model has been validated by comparing the responses with those available published results. Some new numerical examples have been solved to show the effect of various parameters on the bending behaviour of laminated composite flat panel under hygro-thermo-mechanical loading.