The purpose of this research is to observe the differences in consumers behavior on clothes care based on their different lifestyles and different demographic characteristics. The research surveyed 267 women of 20 years old or older living in Taegu City. SPSS package was used for data analysis and frequency, percentage, average, standard deviation, factor analysis, cluster analysis, ANOVA(analysis of valiance). and Duncan test were used The results are as follows: 1. Lifestyle factors for the research object were found as 'Consumption-oriented','family-oriented', 'Economic-oriented','Leisure-oriented','conservatism-oriented'. The categories for analysis according to these factors are classified into 5 categories, category 1 is Leisure/Family-oriented group, category 2 Consumption/Leisure avoidance-oriented group, category 3 Economy/Family Apathy-oriented group, category 4 Conservatism-oriented group, and category 5 Consumption/Innovation group. Five factors for behavior on clothes care are found, including washing method, interest in detergent, environmental behavior, washing effectiveness, and management after washing 2. Behavior on clothes care based on lifestyle groups showed a meaningful difference according to the following: Interest in detergent(p<.05 level), environmental behavior(p<.01 level), and washing effectiveness(p< .01 level) 3. In demographic variations (such as age, monthly income, monthly expenditure on clothes), there is a meaningful difference in behavior on clothes care, such as interest in detergent or management after washing, according to different age groups. However, no meaningful difference is found in behavior on clothes care according to other demographic characteristics.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.431-432
/
2012
In the era of 20 nm scaled semiconductor volume manufacturing, Microelectronics Manufacturing Engineering Education is presented in this paper. The purpose of microelectronic engineering education is to educate engineers to work in the semiconductor industry; it is therefore should be considered even before than technology development. Three Microelectronics Manufacturing Engineering related courses are introduced, and how undergraduate students acquired hands-on experience on Microelectronics fabrication and manufacturing. Conventionally employed wire bonding was recognized as not only an additional parasitic source in high-frequency mobile applications due to the increased inductance caused from the wiring loop, but also a huddle for minimizing IC packaging footprint. To alleviate the concerns, chip bumping technologies such as flip chip bumping and pillar bumping have been suggested as promising chip assembly methods to provide high-density interconnects and lower signal propagation delay [1,2]. Aluminum as metal interconnecting material over the decades in integrated circuits (ICs) manufacturing has been rapidly replaced with copper in majority IC products. A single copper metal layer with various test patterns of lines and vias and $400{\mu}m$ by $400{\mu}m$ interconnected pads are formed. Mask M1 allows metal interconnection patterns on 4" wafers with AZ1512 positive tone photoresist, and Cu/TiN/Ti layers are wet etched in two steps. We employed WPR, a thick patternable negative photoresist, manufactured by JSR Corp., which is specifically developed as dielectric material for multi- chip packaging (MCP) and package-on-package (PoP). Spin-coating at 1,000 rpm, i-line UV exposure, and 1 hour curing at $110^{\circ}C$ allows about $25{\mu}m$ thick passivation layer before performing wafer level soldering. Conventional Si3N4 passivation between Cu and WPR layer using plasma CVD can be an optional. To practice the board level flip chip assembly, individual students draw their own fan-outs of 40 rectangle pads using Eagle CAD, a free PCB artwork EDA. Individuals then transfer the test circuitry on a blank CCFL board followed by Cu etching and solder mask processes. Negative dry film resist (DFR), Accimage$^{(R)}$, manufactured by Kolon Industries, Inc., was used for solder resist for ball grid array (BGA). We demonstrated how Microelectronics Manufacturing Engineering education has been performed by presenting brief intermediate by-product from undergraduate and graduate students. Microelectronics Manufacturing Engineering, once again, is to educating engineers to actively work in the area of semiconductor manufacturing. Through one semester senior level hands-on laboratory course, participating students will have clearer understanding on microelectronics manufacturing and realized the importance of manufacturing yield in practice.
This study aims at investigating the correlation between such variables as a child's family circumstance and personality and that of the child's mathematical ability. For the objects of the study five hundreds and sixteen students (male 273, female 243) were andomly selected from the fifth grade primary school students in the city of Seoul. For the tool of measure the investigation of Korean family circumstances with particular characteristics, the personality test by Chong Pom Mo and Kim Ho Kwon, and the intelligence test by Lee Sang Ro, Chin Whal Kyo and Pyon Chang Jin were employed. For the statistical analysis S. A. S. C., the statistical analysis package of KAIST was employed. The resutis of the test can be summarized as follows. The correlation between the variable of family Circumstance and that of mathematical alility 1) In case of the significance level 0.05 the education of the childs mother and the order of the child's birth have much to do with the perception speed. In case of the significance level 0.1 it makes some difference in the child's perception spead whether the clild's mother has a job or not. 2) In case of the significance level 0.05 the education of the child's father and mother, the father's job and the type of habitation have influence on the child's perception of space. 3) In case of the significance level 0.05 the education of the child's father and mother, the father's job, the order of the child's birth, the type of habitation, their religion, and their cultural, and economic standard have influence on the child's ability of inference. 4) In case of the significance level 0.05 the education of the child's father and mother, the father's job, the type of habitation, their religion and their cultural and economic standard have influence on the child's ability of calculation. 5) In case of the significance level 0.05 any variable of the child's family circumstance has nothing to do with the child's memory. In case of the significance level 0, 1 the type of family and the type of habitation have effect on the child's memory. 6) In case of the significance level 0.05 the education of the child's parents, the jobs of the parents, the type of habtation, their religion, and their cultural and economic standard have influence on the child's linguistic notion. The correlation between the variable of the child's personality and that of the child's mathematical ability 1) In regard to the priority of the variables influencing the child's perception speed, the child's discretion comes first in order, and then sociability and impulsiveness of the child. 2) The child's discretion has effect on the child's space perception. 3) The child's discretion has effect on the child's ability of inference. 4) In regard to the child's ability of calculation the child's discretion comes first in order, and then impulsiveness and sociability of the child. 5) The child's discretion has effect on memory. 6) The child's discretion has effect on the child's linguistic notion.
The DAC-7512E is a 12-bit digital to analog converter that is low power and a single package with internal buffers. The DAC-7512E takes up minimal PCB area for applications of space power electronics design. The spacecraft mass is a crucial point considering spacecraft launch into space. Therefore, we have performed a TID test for the DAC-7512E 12-bit serial input digital to analog converter to reduce the spacecraft mass by using a low-level Gamma-ray irradiator with $Co^{60}$ gamma-ray sources. The irradiation with $Co^{60}$ gamma-rays was carried out at doses from 0 krad to 100 krad to check the error status of the device in terms of current, voltage and bit error status during conversion. The DAC-7512E 12-bit serial digital to analog converter should work properly from 0 krad to 30 krad without any error.
The purpose of this study was to investigate the effect of demographics and general buying characteristics of knitwear consumers on their buying decision-making process. In this study, a self-administered questionnaire was distributed to young career women and female undergraduate students. of 580 questionnaires, 496 were used in the following analysis. The data was analyzed with SPSS package. T-test, one-way ANOVA and x² analysis were used to investigate the impact of characteristics of the consumers on their demographics. The high school graduate-career women group, relative to other groups, showed significant differences in practical aspects in buying knitwear. Second, the knitwear buying places of consumers were significantly different depending on the demographics and general buying characteristics of knitwear. The higher annual knitwear buying expenses and the lower knitwear buying frequency, the more a consumer shopped in department stores. Third, the knitwear satisfaction level of consumers was significantly different depending on their demographics and general buying characteristics of knitwear. career women relative to female undergraduate students showed significant differences in satisfaction with design, quality and yarns.
The purpose of this study was to investigate social support buffering stress symptoms and the relationship between stress symptoms and job performance. The data were obtained from questionnaires completed by 529 workers employed in textile or clothing companies. The SPSS package was used for data analysis which included t-test, ANOVA, and correlation analysis. The results showed there were significant differences in the perceived levels of social support according to individual differences such as gender, marital status, length of service, title of current position, and division of responsibility. Workers with a high level of supervisor or co-worker social support were found to have the lower levels of stress symptoms. Social support appeared to moderate the relationship between stress symptoms and job performance.
Journal of Korean Home Economics Education Association
/
v.9
no.2
/
pp.17-30
/
1997
Purpose of this study is to analyze the validity of textbook content on practical arts for the 6th curriculum, to grasp the content problems and to propose the strategy of reformation to be satisfied with consumer better than supplier. The data collected from 196 elemantary school teachers who lived in Gyungsang-namdo and analized by SPSS/PC(sup)+ package program. The statistical methods used for analysis were frequency, descriptives, validity, t-test, oneway ANOVA. The major findings can be summarised as follows: 1. The textbooks on practical arts for 3rd, 4th, 5th and 6th grades showed unbalanced division for picture, figure, table unite and evaluation type of all units doesn’t show diversity. 2. The validity of textbook contents on practical arts was found to be the highest for 3rd grade textbook and the lowest for 6th grade one. Among the validity of the evaluation items,‘differentiation with other subject’and ‘usefulness of living’showed high scores, wheres ‘fitness of child level’marked lowest score. 3. There was no significant difference Among the validity contents of teachers based on socio-demographic variables.
We describe newly developed software named KPACK for relativistic electronic structure computation of molecules containing heavy elements that enables the two-component ab initio calculations in Kramers restricted and unrestricted formalisms in the framework of the relativistic effective core potential (RECP). The spin-orbit coupling as relativistic effect enters into the calculation at the Hartree-Fock (HF) stage and hence, is treated in a variational manner to generate two-component molecular spinors as one-electron wavefunctions for use in the correlated methods. As correlated methods, KPACK currently provides the two-component second-order M${\o}$ller-Plesset perturbation theory (MP2), configuration interaction (CI) and complete-active-space self-consistent field (CASSCF) methods. Test calculations were performed for the ground states of group-14 elements, for which the spin-orbit coupling greatly influences the determination of term symbols. A categorization of three procedures is suggested for the two-component methods on the basis of spin-orbit coupling manifested in the HF level.
The Purpose of this study is to investigate the marital conflict degree, and find out how demographic variables have and effect on marital conflict. For the data , 521 Married woman living in pusan were selected. The data were analyzed with the SPSS PC+ statistical package using M.SD. Factor analysis. Pearson's correlation, one-way ANOVA, scheffe-test, multiple regression. The main results are as follows: First, items were loaded eight resource categories such as character, sexual, children, communication, husband' family, spousal digression, economic difficulties and financial affairs problem. Second, the degree of marital conflict is relatively middle. Taking a look at each conflict factor, conflict of character problem is the highest, the next is communication problem and the third is children problem. Third, among family environmental variables level of education, income, job of husband and husband's dissatisfaction with job hove influence on the marital conflict.
This study was conducted to develop the questionnaire for the measurement of environmental attitudes and test its reliability and validity. Development and valiadation of the 46 survey items that measure environmental attitudes were described. The total of 3 surveys were conducted and the total of 510 persons including diverse sample groups were questionnaired. The SAS $PC^+$ package program was used in both the reliability analysis and the validity analysis of surveyed data. Results revealed the very high reliability and the high validity of the questionnaire. The reliability of the finalized questionnaire was increased to the level of Cronbach-$\alpha$ 0.92 after the repeated reliability analyses and revisions of the firstly and secondly designed questionnaires. The validity of our questionnaire was sufficiently affirmed through the use and aplication of factor analysis and known-groups technique.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.