• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.63-69
• /
• 2011

The Smart UAV must have the control characteristics of propulsion system necessary for both rotary aircraft and fixed wing aircraft though it equips turbo-shaft engine. To develop an electronic engine controller in the future, it is necessary to accumulate the experience of engine operation and data of tilt rotor aircraft. For this purpose, the computer programs which predict engine performance in the steady state and transient state can be utilized for the supplementation of flight test data. In this work, we developed a dynamic analysis program using engine performance data gathered during the flight tests. In addition the accuracy of the program was verified through comparison with flight test data and the results of steady-state performance analysis program.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.7-11
• /
• 1992

Body water compartments in vivo were determined in Holstein cattle with age ranging from 5 to 521 days to obtain an equation to estimate volumes of body water. Live weight ranged from 47 to 480 kg. Compartments were determined as antipyrine space for total body water (TBW), thiocyanate space for extracellular water (ECW) and Evans blue dye space for plasma water (PW). Body water compartments expressed as a percentage of live weight decreased as age in days increased and significantly correlated with age in days. Regression analyses revealed that prediction equations had low accuracy. Regression equations of body water compartments on live weight (WT, kg) were useful for the prediction of body fluid with a high accuracy. Live weight significantly regressed on age in days (Day), which was inferred to be utilized for estimation of standardized live weight in case animals were emaciated by certain causes such as severe diarrhea or dehydration. In conclusion, following equations were presented to estimate body water compartments of cattle in vivo : TBW in liters = $0.556({\pm}0.007)WT+10$, r = 0.993, $SE{\pm}0.7$ ECW in liters = $0.321({\pm}0.008)WT+10$, r = 0.978, $SE{\pm}0.8$ PW in liters = $0.0502({\pm}0.0012)WT+1.6$, r = 0.0983, $SE{\pm}0.1$ WT (kg) = $0.772({\pm}0.018)Day+24$, r = 0.982, $SE{\pm}2.3$.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.363-366
• /
• 2004

In order to obtain an industrial strain with higher L(+)-lactic acid yield, the wild type strain Rhizopus oryzae PW352 was mutated by means of Nitrogen ions implantation (l5 Kev, $7.8 \times 10^{14} - 2.08 \times 10^{15} ions/Cm^2$ and two mutants RE3303 and RF9052 were isolated. After 36 h shake-flask cultivation, the concentration of L(+)-lactic acid reached 131-136 g/l, the conversion rate of glucose was as high as 86%-90% and the productivity was 3.61 g/l.h. It was almost a 75% increase in lactic acid production compared with the wild type strain. Maximum fermentation temperature of RF9052 was increased to $45^{\circ}C$ from original $36^{\circ}C$. At the same time, the preferred range of fermentation temperature of RF9052 was broadened compared with PW352.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.100-110
• /
• 2008

It is not easy to monitor and identify all engine faults and conditions using conventional fault detection approaches like the GPA (Gas Path Analysis) method due to the nature and complexity of the faults. This study therefore focuses on a model based diagnostic method using Neural Network algorithms proposed for fault detection on a turbo shaft engine (PW 206C) selected as the power plant for a tilt rotor type unmanned aerial vehicle (Smart UAV). The model based diagnosis should be performed by a precise performance model. However component maps for the performance model were not provided by the engine manufacturer. Therefore they were generated by a new component map generation method, namely hybrid method using system identification and genetic algorithms that identifies inversely component characteristics from limited performance deck data provided by the engine manufacturer. Performance simulations at different operating conditions were performed on the PW206C turbo shaft engine using SIMULINK. In order to train the proposed BPNN (Back Propagation Neural Network), performance data sets obtained from performance analysis results using various implanted component degradations were used. The trained NN system could reasonably detect the faulted components including the fault pattern and quantity of the study engine at various operating conditions.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.449-455
• /
• 2009

The antioxidant properties of water extracted polysaccharides (PW), 1%(w/v) NaOH extracted polysaccharides (PN1), and 5%(w/v) NaOH extracted polysaccharides (PN5) were assessed in this paper. PW showed good capability of scavenging $H_2O_2$, anti-lipid peroxidation, reduction power, and scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH). The maximum values were all observed at the dose of 1 mg/mL sample. As far as the antioxidant activities of PN1 were concerned, the capability of scavenging superoxide radical, chelating metal, and total antioxidation showed higher than those of PN5. When polysaccharide concentration was 1 mg/mL, the 3 index described above were attached 71.8%, 51.6%, and $446.3{\mu}M$ Trolox equivalent, respectively. With respect to PN5, higher capabilities of scavenging hydroxyl free radicals were obtained while the peak of 84.8% was observed at the concentration of 1.0 mg/mL. Moreover, the concentration-dependent influences were characterized in all cases.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.245-249
• /
• 2007

In this study a model-based diagnostic method using the Neural Network was proposed for PW206C turbo shaft engine and performance model was developed by SIMULINK. Fault and test database to build the NN was obtained at various off-design operating range such as flight altitude, flight Mach number and gas generator rotational speed variation. According to the fault detection analysis results, it was confirmed that the proposed fault detection method could find well the fault of compressor, compressor turbine and power turbine at on-design point as well as off-design point conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.200-209
• /
• 2014

In this paper, we present a general model for synthetic transmit focusing method using plane waves (STF-PW) of which the properties are investigated through mathematical analysis and compared with those of the conventional focusing method. The analysis results show that STF-PW produces non-diffracting beams in the sense that their main lobe widths do not change with depth. We also present a method for synthesis of plane waves to obtain a desired main lobe width while preventing grating lobe generation and a method for broadening the region over which the non-diffracting property is maintained. The proposed model and analysis results were validated through computer simulations.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.416-424
• /
• 2019

The authentication technologies used to access computers in both IT and operational technology (OT) network areas include ID/PW, public certificate, and OTP. These authentication technologies can be seen as reflecting the nature of the business-driven IT network. The same authentication technologies is used in SCADA control networks where the operational technology is centered. However, these authentication technologies do not reflect the characteristics of the OT control network environment, which requires strict control. In this paper, we proposed a new enhanced user authentication method suitable for the OT SCADA control network centered on control information processing, utilizing the physical terminal address and operator location information characteristics of the operator's mobile terminal and control network.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.7-13
• /
• 2011

As an aid towards improving the treatment of exchange and correlation effects in electronic structure calculations, it is desirable to have a clear picture of concepts of exchange-correlation functionals in computational calculations. For achieving this aim, it is necessary to perform different theoretical methods for many groups of materials. We have performed hybrid density functional theory (DFT) methods to investigate the density charges of atoms in rings and cages of carbon nanotube. DFT methods are engaged and compared their results. We have also been inclined to see the impression of exchange and correlation on nuclearnuclear energy and electron-nuclear energy and kinetic energy. With due attention to existence methods, B3P86, B3PW91, B1B96, BLYP and B3LYP have used in this work.

• Convergence Security Journal
• /
• v.19 no.3
• /
• pp.29-36
• /
• 2019

The convergence of traditional industry and ICT is a combination of security threats and vulnerabilities in ICT and specific industry-specific problems of existing industries, and new security threats and vulnerabilities are emerging. In particular, in the medical ICT convergence industry, various problems regarding user authentication are derived from the medical information system, which is being used for abuse and security weaknesses. According, this study designed and implemented a user authentication system for secure user management in medical ICT convergence environment. Specifically, we design and implement measures to solve the abuse and security weaknesses of ID sharing and to solve the inconvenience of individual ID / PW authentication by performing user authentication using personalized devices based on medical information systems.