• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.966-970
• /
• 2006

We reported on characteristics of the piezoelectric ceramic-polymer composite for the application of the thick-film speaker. The PVDF-PZT composites were fabricated to incorporate the advantages of both ceramic and polymer with various mixing ratios by 3-roll mill mixer. The composite solutions were coated by the conventional screen-printing method on ITO electrode coated PET (Polyethylene terephthalate) polymer film. After depositing the top-electrode of silver-paste, 4 kV/mm of DC field was applied at $120^{\circ}C$ for 30 min to poling the composite films. The value of $d_{33}$ (piezoelectric charge constant) was increased when the PZT weight percent was increased. The maximum value of the $d_{33}$ was 24 pC/N at 70 wt% PZT. But the $g{33}$ (piezoelectric voltage constant) showed the maximum value of $32mV{\cdot}m/N$ at 65 wt% of PZT powder. The SPL (sound pressure level) of the speaker fabricated with the 65:35 composite film was about 68 dB at 1 kHz.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.712-715
• /
• 2016

In this paper, we fabricated flexible CNT/PVDF piezoelectric composite device by introducing CNTs (carbon nanotubes) into PVDF (poly-vinylidene fluoride) solution using spray coating technique. Flexible PEDOT:PSS conducting polymer was used as electrodes. We tried to improve the piezoelectric performance from the CNT/PVDF composite film by increasing the portion of the ${\beta}$-phase PVDF in the film. We confirmed the structural conformation of the CNT/PVDF composite film as a function of CNT concentration by using FT-IR (fourier transform infra-red). As increasing CNT concentration, portion of the ${\beta}$-phase PVDF and resulting piezoelectric performance increased in the CNT/PVDF composite film. We found that CNTs introduced were played as seeds for formation of the ${\beta}$-phase PVDF in the CNT/PVDF composite film and resulting improvement of the piezoelectric performance.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.716-719
• /
• 2016

In this paper, we fabricated flexible CNT/PVDF (carbon nanotube / polyvinylidene fluoride) piezoelectric composite device with flexible poly(3,4-ethylenedioxythiophene) : polystyrene sulfonate (PEDOT:PSS) conducting polymer electrode using spray coating method. We tried to improve the piezoelectric performance from the CNT/PVDF composite film by enhancing electrical conductivity of the PEDOT:PSS electrodes. Electrical conductivity of the PEDOT:PSS electrode was enhanced by dipping it into the EG (ethylene glycol) solvent. Changes of chemical composition of the PEDOT:PSS electrode were analyzed with the dipping time by XPS (x-ray photoelectron spectroscopy) in terms of oxygen (O1s). Finally, Piezoelectric performances such as output voltage and current were measured with the dipping time. We found that enhanced electrical conductivity of the PEDOT:PSS electrodes resulted in improvement of the piezoelectric performance of the CNT/PVDF films.

• 센서학회지
• /
• 제28권4호
• /
• pp.205-215
• /
• 2019

A flexible polyvinylidene fluoride (PVDF)/polydimethylsiloxane (PDMS) composite prototype with high piezoelectricity and force sensitivity was constructed, and its huge potential for applications such as biomechanical energy harvesting, self-powered health monitoring system, and pressure sensors was proved. The crystallization, piezoelectric, and electrical properties of the composites were characterized using an X-ray diffraction (XRD) experiment and customized experimental setups. The composite can sustain up to 100% strain, which is a huge improvement over monolithic PVDF fibers and other PVDF-based composites in the literature. The Young's modulus is 1.64 MPa, which is closely matched with the flexibility of the human skin, and shows the possibility for integrating PVDF/PDMS composites into wearable devices and implantable medical devices. The $300{\mu}m$ thick composite has a 14% volume fraction of PVDF fibers and produces high piezoelectricity with piezoelectric charge constants $d_{31}=19pC/N$ and $d_{33}=34pC/N$, and piezoelectric voltage constants $g_{31}=33.9mV/N$ and $g_{33}=61.2mV/N$. Under a 10 Hz actuation, the output voltage was measured at 190 mVpp, which is the largest output signal generated from a PVDF fiber-based prototype.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.584-589
• /
• 2007

Polyvinylidene fluoride (PVDF) is a type of electroactive polymer which shows significant shape change when exposed to electric field. PVDF is generally used as a film sensor in non-destructive evaluation (NDE) of materials. In this study, however, its properties relevant to film actuator are considered. Since most of the electromechanical applications that use PVDF and its copolymers as actuators use their piezoelectric properties, only the piezoelectric properties of PVDF are discussed here. These properties depend mainly on the degree of crystallinity of PVDF. Available data from recent research publications are used to simulate the response of a PVDF bimorph beam on the application of electric field, by a commercial finite element analysis package ANSYS. Finally, the factors that affect mechanical behavior of PVDF bimorph beam are discussed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.216-219
• /
• 2002

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) have been used use as a sensor. The advantages of PVDF are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. PVDF sensor can be directly embedded and attached to a structure. In this study, PVDF sensor was embedded in single glass fiber/epoxy composites whereas PZT sensor with AE was attached to single fiber composites (SFC). Piezoelectric sensor responds to interfacial damage of SFC. The signals measured by PVDF sensor were compared to PZT sensor. PZT sensor detected the signals of fiber fracture, matrix crack, interfacial debonding and even sensor delamination, whereas PVDF sensor only detected fiber fracture signals so far, because PZT sensor is much more sensitive than current PVDF sensor. Wave voltage of fiber fracture measured by PVDF sensor was lower than that of PZT sensor, but the results of fast Fourier transform (FFT) analysis were same. Wave velocity using two PZT sensors was also studied to know the internal and surface damage effect of epoxy specimens.

• Composites Research
• /
• 제29권4호
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF)는 압전성을 나타내는 대표적인 고분자로 1960년대부터 많은 연구가 진행되어 왔다. PVDF는 반결정의 고분자로써 5가지의 결정 구조(${\alpha}$, ${\beta}$, ${\gamma}$, ${\delta}$, 그리고 ${\varepsilon}$형)로 구성되어 있다. ${\alpha}$형과 ${\delta}$형 결정은 전기적으로 반응하지 않는 무극성 결정구조이나 ${\beta}$형, ${\gamma}$형 그리고 ${\varepsilon}$형은 전기적으로 반응하는 극성 결정구조이다. 그 중에서도 ${\beta}$형 결정구조는 트랜스 형 분자 쇄가 평행으로 충진 된 형태로서 PVDF 단위체가 갖는 영구 쌍극자가 모두 한 방향으로 배열되어 있는 구조이기 때문에 자발 분극이 커지게 되고 압전성을 나타내게 된다. 일반적으로 ${\beta}$형 결정구조는 연신을 통한 ${\alpha}$형 결정구조의 변환을 통하여 얻을 수 있고, 연신 후 후처리 공정을 통해 그 양을 증가시킬 수 있다. 습식방사로 제조된 PVDF 섬유는 응고욕에서 극성 용매의 확산 메커니즘에 의해 ${\beta}$형 결정구조가 형성되는 장점을 가지고 있지만 극성 용매가 빠져나감과 동시에 섬유 고화가 진행되기 때문에 용매의 확산 경로가 섬유 내부 기공으로 남게 되는 단점을 가지고 있다. 이 기공은 폴링(Poling) 공정에서 전기장에 의한 분극을 방해하여 그 효과를 감소시키는 역할을 한다. 또한, PVDF 섬유가 압전 특성을 필요로 하는 응용분야에 사용되기 위해서는 섬유 가공 후에 전극이 반드시 부착되어야 하는데 섬유 형태로 제조된 PVDF에 전극을 형성하기는 매우 어렵다. 본 연구에서는 압전성을 갖는 PVDF 섬유를 습식 방사와 건식 방사의 혼합 공정으로 제조하여 기공 문제를 해결하였고, 전극이 섬유 내부에 삽입된 Core/Shell 형태의 PVDF 섬유를 제조하여 까다로운 전극형성 문제를 해결하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제6권1호
• /
• pp.13-15
• /
• 2014

We develop a method to fabricate a flexible thin film audio systems using polyvinylidene fluoride(PVDF). The system we designed showed the properties of increased flexibility, transparency, and sound pressure levels. As an input port of two terminals, transparent oxide thin film with a low resistivity is adopted. In order to provide dielectric insulation, a transparent insulating oxide thin film is coated to obtain double-layered structure. In the range of visible light, the output from the output of the system showed a increased and improved sound pressure level. The piezoelectric polymer film of PVDF is used to produce mechanical vibration due to the applied electrical voltage signal. An analog electric voltage signal is transformed into sound waves in the audio system.

• 비파괴검사학회지
• /
• 제32권5호
• /
• pp.585-596
• /
• 2012

PVDF와 P(VDF-TrFE)로 대별되는 압전고분자는 종래의 대표적인 압전재료인 PZT에 비해 전기음향변환효율이 떨어지며 내부손실이 큰 단점은 있으나, 음향임피던스가 물 또는 생체와 비슷하고 수신효율이 우수하며 광대역 특성을 나타내는 등의 장점을 가진 재료이다. 또한 다른 압전재료에 비해 얇은 막으로의 제작이 쉽고, 그 막은 유연하므로 복잡한 곡면을 갖는 고주파 초음파 트랜스듀서 재료로 유용하다. 그러한 특성은 생의학적 응용에 적합한바, 다양한 형태의 초음파 트랜스듀서가 연구 개발되어져 왔다. 본 논문에서는 먼저, 압전고분자막을 이용하여 초음파 트랜스듀서를 설계 제작하는데 있어서 고려해야할 몇 가지 주요사항을 기술하고, KLM 모델을 사용한 해석을 통하여 그 고려사항들이 트랜스듀서의 동작에 미치는 영향을 파악하였다. 다음으로, 의학적 또는 생물학적 응용을 목적으로 초음파 영상을 얻고 있는 몇몇 주요 응용분야에서 사용되는 압전고분자 트랜스듀서의 구조와 그것을 이용하여 얻은 영상의 특징에 대하여 간략히 해설하였다.

• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.923-929
• /
• 2008

On the piezoelectric polymer, PVDF (poly vinylidene fluoride), the transparent conducting oxide (TCO) electrode material thin film was deposited by roll to roll sputtering process mentioned as a mass product-friendly process for display application. The deposition method for ITO Indium Tin Oxides) as our TCO was DC magnetron sputtering optimized for polymer substrate with the low process temperature. As a result, a high transparent and good conductive ITO/PVDF film was prepared. During the process, especially, the gas mixture ratio of Ar and Oxygen was concluded as an important factor for determining the film's physical properties. There were the optimum ranges for process conditions of mixture gas ratio for ITO/PVDF From these results, the doping mechanism between the oxygen atom and the metal element, Indium or Tin was highly influenced by oxygen partial pressure condition during the deposition process at ambient temperature, which gives the conductivity to oxide electrode, as generally accepted. With our studies, the process windows of TCO for display and other application can be expected.