• Elastomers and Composites
• /
• 제45권1호
• /
• pp.40-43
• /
• 2010

본 연구에서는 전기방사 장치의 드럼형태 컬렉터의 회전속도를 조절함으로써 제조된 섬유가 랜덤 또는 배향성 (1축, 2축)을 갖는 폴리이미드(PI) 나노섬유 매트를 제조하였다. 제조된 PI 매트의 구조를 전자현미경(SEM)을 통해 관찰한 결과 전술한 배향성을 확인할 수 있었다. 1 M 리튬트리풀루오로-메탄-설포네이트와 테트라-에틸렌 글리콜디메틸 에테르의 혼합용액에 PI 매트를 침지시킨 후 이온전도기로 이온전도도를 측정하였다. 2축배향 매트가 가장 높은 이온전도도를 나타내었다. 1축 배향의 경우 이온의 이동방향과 수직방향이 평행방향보다 이온전도도가 낮게 나타났고, 아울러 일정한 주기성을 나타내었다. 주기성은 섬유간 거리와 이온 속도를 이용하여 설명할 수 있었다.

• 천문학회지
• /
• 제38권2호
• /
• pp.219-222
• /
• 2005

We present the high-resolution (2"-4") images of the molecular envelopes surrounding the evolved stars, V Hya, VY CMa, and ${\pi}^1$ Gru observed with the Submillimeter Array. The CO J=2-1 and 3-2 images of the carbon star V Hya show that the circumstellar structure of this star consists of three kinematic components; there is a flattened disk-like envelope that is expanding with a velocity of ${\~}16 km\;s^{-1}$, the second component is the medium-velocity wind having a deprojected velocity of 40-120 km $s^{-l}$ moving along the disk plane, and the third one is the bipolar molecular jet having an extreme velocity of 70-185 km $s^{-l}$. The axis of this high velocity jet is perpendicular to the plane of the disk-like envelope. We found that the circumstellar structure of the S-star ${\pi}^1$ Gru traced by the CO J =2-1 resembles that of V Hya quite closely; the star is surrounded by the expanding disk-like envelope and is driving the medium-velocity wind along the disk plane. We also obtained the excellent images of VY CMa with the CO and $^{13}CO$ J=2-1 and $SO\;6_5-5_4$ lines. The maps of three molecular lines show that the envelope has a significant velocity gradient in the east-west direction, suggesting that the envelope surrounding VY CMa is also flattened and expanding along its radial direction. The high-resolution images obtained with the SMA show that some AGB stars are associated with the asymmetric mass loss including the equatorial wind and bipolar jet.

• 대한수학회지
• /
• 제54권1호
• /
• pp.69-86
• /
• 2017

The point $P{\in}{\mathbb{P}}^2$ is referred to as a Galois point for a nonsingular plane algebraic curve C if the projection ${\pi}_P:C{\rightarrow}{\mathbb{P}}^1$ from P is a Galois covering. In contrast, the point $P^{\prime}{\in}C^{\prime}$ is referred to as a weak Galois Weierstrass point of a nonsingular algebraic curve C' if P' is a Weierstrass point of C' and a total ramification point of some Galois covering $f:C^{\prime}{\rightarrow}{\mathbb{P}}^1$. In this paper, we discuss the following phenomena. For a nonsingular plane curve C with a Galois point P and a double covering ${\varphi}:C{\rightarrow}C^{\prime}$, if there exists a common ramification point of ${\pi}_P$ and ${\varphi}$, then there exists a weak Galois Weierstrass point $P^{\prime}{\in}C^{\prime}$ with its Weierstrass semigroup such that H(P') = or , which is a semigroup generated by two positive integers r and 2r + 1 or 2r - 1, such that P' is a branch point of ${\varphi}$. Conversely, for a weak Galois Weierstrass point $P^{\prime}{\in}C^{\prime}$ with H(P') = or , there exists a nonsingular plane curve C with a Galois point P and a double covering ${\varphi}:C{\rightarrow}C^{\prime}$ such that P' is a branch point of ${\varphi}$.

• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.27-33
• /
• 2010

We have successfully demonstrated a high-pin-count and thin embedded-LSI package to realize next generation's mobile terminals. The following three design key points were applied: (i) Using Cu posts, (ii) Using the coreless structure, (iii) Using a Cu plate as the ground plane. In order to quantitatively determine the contribution of the three points, the five-stage process for reducing the number of metal layers is described by means of the electrical simulation. The point-(i) and (ii) are effective from the viewpoint of the power integrity (PI); that is, these points play important roles in reducing the number of metal layers, and especially the point-(ii) contributes at least twice as the point-(i). The point-(iii) is not effective in the PI, but has a few effects on the signal integrity (SI). For reducing the number of metal layers, we should, at first, pay attention whether the PI characteristics fulfill the specification, and then we should confirm the SI characteristics.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.130-136
• /
• 1998

A procedure of stress and strength analysis has been proposed for the centrifuge rotor of composite materials of quasi-isotropic laminates. The goal in this study is to maximize the allowable rotating speed, that is, to minimize maximum strength ratio with the given path length by changing the geometric parameter-outer radius and ply angles in quasi-isotropic laminates. Optimum values of the geometric parameter-outer radius and ply angles are obtained by multilevel optimization. All the geometric dimensions and stresses are normalized such that the result can be extended to a general case. Two dimensional analysis at each cross section with an elliptic tube hole subjected to internal hydrostatic pressures by samples as well as the centrifugal body forces has been performed along the height to calculate the stress distribution with the plane stress assumption, and Tsai-Wu failure criterion is used to calculate the strength ratio. The maximum allowable rotating speed can be increased by changing the radii of the outer surface along the height with the maximum strength ratio under the unit value : The optimal number of ply angles maximizing the allowable rotating speed in quasi-isotropic laminates is found to be the half number of tube hole, and the optimal laminate rotation angle is the half of $[{\pi}/m]$. A $[{\pi}/3]$ laminate, for instance, is stronger than a $[{\pi}/4]$ laminate for the centrifuge rotor of 6 tube hole number even though they have the same stiffness.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.595-598
• /
• 2010

Ab initio and DFT molecular orbital calculations predict that acetyl radical reacts with acetylene through interactions primarily involving the SOMO of the radical and the in-plane ${\pi}$-bond of acetylene. An energy barrier (${\Delta}E_1$) of 39.6 kJ $mol^{-1}$ is predicted for the preferred anti arrangement of reactants at the CCSD(T)/cc-pVDZ//BHandHLYP/cc-pVDZ level of theory. NBO analysis reveals additional interactions between the radical SOMO and the nearby C-H ${\sigma}$-bond in acetylene worth about 10% of the total transition state interaction energy. This type of orbital interaction has not previously been observed in radical addition reactions involving C-C ${\pi}$-bonds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.414-416
• /
• 1995

We have studied the effect of the mesogenic core of nematic liquid crystals (NLCs) for polar (out-of-plane tilt) anchoring strength on rubbed polyimide (PI) films. The order of polar anchoring strength for NLCs on rubbed PI films is 5CB > PCH5 > CCH5. This order is the same for all rubbing strengths investigated. From these results, we suggest that the polar anchoring strength strongly depends on the polarizability of the NLCs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.286-286
• /
• 2000

We consider a negative unity feedback control system in which Che PIO, PI, PD or P controller and a transfer function having only poles are in cascade, We define the notion of the structural polynomial which means that there exists a subdomain of the coefficient space in which the polynomial is Hurwitz (left half plane stable) polynomial. We obtain the necessary and sufficient condition of the structure of the transfer function of which the characteristic polynomial is a structural polynomial, In addition, this paper present another necessary and sufficient condition for the existence of a constant gain controller with which the characteristic polynomial is structurally stable, For the structurally stabilizable P controller, it is allowed that the transfer function may not to all pole plants.

• 대한수학회지
• /
• 제49권4호
• /
• pp.671-686
• /
• 2012

This paper mainly deals with the tilted Carath$\acute{e}$odory class by angle ${\lambda}$ ${\in}$ ($-{\pi}/2$, ${\pi}/2$), denoted by $P{\lambda}$) an element of which maps the unit disc into the tilted right half-plane {<${\omega}$ : Re $e^{i{\lambda}}{\omega}$ > 0}. Firstly we will characterize $P{\lambda}$ from different aspects, for example by subordination and convolution. Then various estimates of functionals over $P{\lambda}$ are deduced by considering these over the extreme points of $P{\lambda}$ or the knowledge of functional analysis. Finally some subsets of analytic functions related to $P{\lambda}$ including close-to-convex functions with argument ${\lambda}$, ${\lambda}$-spirallike functions and analytic functions whose derivative is in $P{\lambda}$ are also considered as applications.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.169-172
• /
• 2002

The voltage holding ratio(VHR) and the residual DC property in the in-plane switching (IPS) cells on a polyimide surface was studied. Several IPS cells which have different concentrations of cyano liquid crystals (LCs) were fabricated. We found that the VHR of the IPS cell was decreased with increasing concentration of cyano LCs. Also, the VHR of the IPS cell was increased with increasing specific resistivity of fluorine LCs. The residual DC voltage of the IPS cell by capacitance-voltage (C-V) hysteresis method was decreased with increasing concentration of cyano LCs. The residual DC property of the IPS cell on the rubbed PI surface can be improved by high polarity of cyano LC.