• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.343-351
• /
• 2008

In this paper, we investigate the design of the QAM(Quadrature Amplitude Modulation) method for the CACB(Constant Amplitude Coded Multicode Biorthogonal) scheme. The modulation method fan improve the transmission data rate by increasing the BE(Bandwidth Efficiency). Additionally, we can improve the system performance by using the QAM SD(Soft Decision) method with the MDSA(Minimum Distance Selection Algorithm). Finally, the DFE(Decision Feedback Equalizer) for the CACB-QAM is simulated under the MPF(MultiPath Fading) channel for real implementation. The proposed scheme can be used for the PHY(PHYsical layer) standard of the WPAN(Wireless Personal Area Network) requiring high rate data transmission.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1218-1224
• /
• 2023

We investigated the radiation shielding competence for TeO₂-V₂O₅-MoO₃ glasses. The Phy-X software was used to report the radiation shielding parameters for the present glasses. With an increase in TeO₂ and MoO₃ content, the samples' linear attenuation coefficient improves. However, at low energies, this change is more apparent. At low energy, the present samples have an effective atomic number (Z_eff) that is relatively high (in order of 16.17-24.48 at 0.347 MeV). In addition, the findings demonstrated that the density of the samples is a very critical factor in determining the half value layer (HVL). The minimal HVL for each sample can be found at 0.347 MeV and corresponds to 1.776, 1.519, 1.391, 1.210 and 1.167 cm for Te1 to Te5 respectively. However, the highest HVL of these glasses is recorded at 1.33 MeV, which corresponds to 3.773, 3.365, 3.218, 2.925 and 2.908 cm respectively. The tenth value layer results indicate that the thickness of the specimens needs to be increased in order to shield the photons that have a greater energy. Also, the TVL results demonstrated that the sample with the greatest TeO₂ and MoO₃ concentration has a higher capacity to attenuate photons.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.474-481
• /
• 2010

In this paper, we present an effective cross layer-based video transmission algorithm over multi-hop mobile ad hoc networks. The proposed algorithm selects the most efficient PHY mode of wireless LAN multi-rate service at each node in a distributed way based on the available information at application, MAC, and physical layers in order to minimize end-to-end delay and maintain packet loss rate in tolerable range at the receiver. Finally, experimental results are provided to show superior performance of the proposed algorithm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.3
• /
• pp.240-250
• /
• 2010

Double Gate MOSFETs (DG MOSFETs) with doping in one or two thin layers of an otherwise intrinsic channel are simulated to obtain the transport characteristics, threshold voltage and leakage current. Two different device structures- one with doping on two layers near the top and bottom oxide layers and another with doping on a single layer at the centre- are simulated and the variation of device parameters with a change in doping concentration and doping layer thickness is studied. It is observed that an n-doped layer in the channel reduces the threshold voltage and increases the drive current, when compared with a device of undoped channel. The reduction in the threshold voltage and increase in the drain current are found to increase with the thickness and the level of doping of the layer. The leakage current is larger than that of an undoped channel, but less than that of a uniformly doped channel. For a channel with p-doped layer, the threshold voltage increases with the level of doping and the thickness of the layer, accompanied with a reduction in drain current. The devices with doped middle layers and doped gate layers show almost identical behavior, apart from the slight difference in the drive current. The doping level and the thickness of the layers can be used as a tool to adjust the threshold voltage of the device indicating the possibility of easy fabrication of ICs having FETs of different threshold voltages, and the rest of the channel, being intrinsic having high mobility, serves to maintain high drive current in comparison with a fully doped channel.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.44-58
• /
• 2009

To provide efficient video streaming service over a wireless networks, the rate adaptation scheme should be applied at the low layer and the quality adaptation scheme should be considered at the high layer. In this paper, we propose a new cross-layer design which includes rate adaptation scheme at the MAC/PHY layers and quality control at the application layer. Proposed rate adaptation scheme improves the wireless channel utilization by transmitting the consecutive frames and selects optimal transmission mode by calculating the goodputs for each transmission mode. Based on selected transmission mode, the rate adaptation scheme calculates the rate limits and informs that to the application layer. Then the video streaming application utilizes this rate limits to adjust the quality of the video stream. Through performance evaluations, we prove that our cross-layer design improves the quality of the wireless video streaming service by means of the proposed rate adaptation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.230-236
• /
• 2007

This paper presents a resource management mechanism for the mesh networking in IEEE 802.15.3 High-rate WPAN. IEEE 802.15 TGS is standardizing the MAC and PHY for mese networking. This task group researches the mechanism that are extension of network coverage without increasing transmit power of receive sensitivity, and studies the enhanced reliability via route redundancy. In this paper we propose the distributed resource management scheme that is fairly using the channel resource in the piconet without centralized piconet coordinator. Each DEV reserves the channel time and broadcasts its information. This scheme has unfairness for later associated DEV because of preoccupation of earlier associated DEVs. This paper presents the method that fairly allocates the channel time in MAC layer. And we evaluate the performance enhancement using simple simulations.

• Journal of the Korea Society for Simulation
• /
• v.15 no.3
• /
• pp.87-91
• /
• 2006

With the growth of the internet, the number of wireless internet users has increased continuously up to date. However, mobile communications could not support high speed transmission rate with cheap communication fee and wireless LAN has problems in providing terminal mobility and wide area connectivity, respectively. So the WMAN standard has been newly designed to make up for these limits. The initial 802.16 specification effectively offers a solution for providing fixed users with high speed wireless communication but it does not offer terminal mobility. So the 802.16d and 802.16e have been developed as the next generation solution that can support various PHY layer (SC, SCa, OFDM, OFDMA) and offer the terminal mobility. In this paper, we propose an effective uplink scheduling algorithm for VoIP with using UGS, and we show that our proposed algorithm is superior in view of average delay and management of uplink bandwidth to conventional rtPS algorithm and the scheme in reference, with using NS-2 network simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1911-1932
• /
• 2013

Orthogonal frequency-division multiplexing (OFDM) has become a popular modulation scheme for wireless protocols because of its spectral efficiency and robustness against multipath interference. Although the components of various OFDM protocols are functionally similar, they remain distinct because of the characteristics of the environment. Recently, graphics processing units (GPUs) have been used to accelerate the signal processing of the physical layer (PHY) because of their great computational power, high development efficiency, and flexibility. In this paper, we describe the implementation of parameterized baseband modules using GPUs for two different OFDM protocols, namely, 802.11a and 802.16. First, we introduce various modules in the modulator/demodulator parts of the transmitter and receiver and analyze the computational complexity of each module. We then describe the integration of the GPU-based baseband modules of the two protocols using the parameterized method. GPU-based implementations are addressed to explain how to accelerate the baseband processing to archive real-time throughput. Finally, the performance results of each signal processing module are evaluated and analyzed. The experiments show that the GPU-based 802.11a and 802.16 PHY meet the real-time requirement and demonstrate good bit error ratio (BER) performance. The performance comparison indicates that our GPU-based implemented modules have better flexibility and throughput to the current ones.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.62-70
• /
• 2007

In this paper, we design a mobile camera processor to support the MIPI CSI-2 and DPHY specification. The lane management sub-layer of CIS2 handles multi-lane configuration. Thus conceptually, the transmitter and receiver have each independent buffer on multi lanes. In the proposed architecture, the independent buffers are merged into a single common buffer. The single buffer architecture can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. For a key issue for the data synchronization problem, the synchronization start codes are added as the starting for image data. We design synchronization logic to synchronize the received clock and to generate the byte clock. We present the verification results under proposed test bench. And we show the waves of simulation and logic synthesis results of the designed processor.

• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.184-196
• /
• 2023

Background: Radiation protection is crucial in various fields due to the harmful effects of radiation. Shielding is used to reduce radiation exposure, but gamma radiation poses challenges due to its high energy and penetration capabilities. Materials and Methods: This work investigates the radiation shielding properties of polyvinylidene fluoride (PVDF) samples containing different weight fraction of tungsten carbide (WC), tungsten trioxide (WO₃), and tungsten disulfide (WS₂). Parameters such as the mass attenuation coefficient (MAC), half-value layer (HVL), mean free path (MFP), effective atomic number (Z_eff), and macroscopic effective removal cross-section for fast neutrons (Σ_R) were calculated using the Phy-X/PSD software. EpiXS simulations were conducted for MAC validation. Results and Discussion: Increasing the weight fraction of the additives resulted in higher MAC values, indicating improved radiation shielding. PVDF-xWC showed the highest percentage increase in MAC values. MFP results indicated that PVDF-0.20WC has the lowest values, suggesting superior shielding properties compared to PVDF-0.20WO₃ and PVDF-0.20WS₂. PVDF-0.20WC also exhibited the highest Z_eff values, while PVDF-0.20WS₂ showed a slightly higher increase in Z_eff at energies of 0.662 and 1.333 MeV. PVDF-0.20WC has demonstrated the highest Σ_R value, indicating effective shielding against fast neutrons, while PVDF-0.20WS₂ had the lowest Σ_R value. The Monte Carlo N-Particle Transport version 5 (MCNP5) simulations showed that PVDF-xWC attenuates gamma radiation more than pure PVDF, significantly decreasing the dose equivalent rate. Conclusion: Overall, this research provides insights into the radiation shielding properties of PVDF mixtures, with PVDF-xWC showing the most promising results.