• 월간포장계
• /
• 통권229호
• /
• pp.46-49
• /
• 2012

• Transactions on Electrical and Electronic Materials
• /
• 제9권2호
• /
• pp.79-83
• /
• 2008

The dampness by treating the surface with polyethylene terephthalate (PET) film was measured to grasp the plasma parameters and was observed the surface condition with an atomic force microscope (AFM) to find the causes of the dampness. Also, the vibrational and rotational temperatures in the plasma were calculated after identifying the radicals within the plasma by analyzing the emission spectral with an emission spectrum. The hydrophilic properties were enhanced, by treating the surface of the PET film with non-equilibrium atmospheric discharge plasma. When the rotational temperature was 0.22 to 0.31 eV within the plasma, surface modification control could be easily carried out to surface treatment of PET film on non-equilibrium atmospheric pressure plasma.

• 한국재료학회지
• /
• 제18권1호
• /
• pp.32-37
• /
• 2008

The electrical, optical, structural and surface properties of an indium tin oxide (ITO) film grown on a flexible PET substrate using a specially designed roll-to-roll (R2R) sputtering system as a function of the DC power, $Ar/O_2$ flow ratio, and rolling speed is reported. It was observed that both the electrical and optical properties of the ITO film on the PET substrate were critically dependent on the $Ar/O_2$ flow ratio. In addition, x-ray diffraction examination results showed that the structure of the ITO film on the PET substrate was an amorphous structure regardless of the DC power and the $Ar/O_2$ flow ratio due to a low substrate temperature, which was maintained constant by a main cooling drum. Under optimized conditions, ITO film with resistivity of $6.44{\times}10^{-4}{\Omega}-cm$ and transparency of 86% were obtained, even when prepared at room temperature. Furthermore, bending test results exhibited that R2R-grown ITO film had good flexibility which would be applicable to flexible displays and solar cells.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.111-118
• /
• 2023

본 연구에서 연속형 레이저와 나노초 레이저의 경우에는 고분자와 물성 조건이 맞지 않아서, 고분자 필름 표면에 특정 패터닝이 구현되지 않았다. 그러나, 펨토초 레이저를 활용하여 HDPE, PP, PET 등의 식품포장 필름의 표면에 패터닝이 구현됨을 확인하였다. 따라서, 본 연구에서 식품포장 필름에서 펨토초 레이저 패터닝 공정 조건을 확립하였고, 싱글 펄스에 의한 대면적 원형 패턴, 싱글 펄스를 30%를 중첩한 대면적 거칠기 패턴, 직선 패턴, 직선 패터닝을 중첩한 대면적 거칠기 패턴, 직선 패터닝을 교차하여 격자 패턴 등의 표면 패터닝 필름을 제작하였다. 또한, 표면 패턴 구조와 크기에 따른 패터닝 HDPE, PP, PET 필름은 SEM, AFM, 접촉각 분석을 통하여 그 특성을 확인하였다. 펨토초 레이저 패터닝을 하지 않은 각 대조군 필름의 표면 대비 대면적 원형 패터닝 HDPE 및 PP 필름, 싱글 펄스를 30%를 중첩한 대면적 거칠기 패터닝 및 직선 패터닝을 중첩한 대면적 거칠기 패터닝 PET 필름의 표면은 27.1-37.5°의 접촉각을 나타냄으로써, 패터닝 후에 HDPE, PP, PET 필름은 친수성 표면으로 변화되었다. 반면, 나노-마이크로 크기의 돌기 표면구조를 갖고 있는 대면적 격자 패터닝 HDPE 필름의 경우에는 120.4°의 접촉각을 보임으로써, 패터닝 후에 소수성 표면으로 변화되었다. 따라서, 패터닝을 통해 친수성 표면으로 바뀐 필름들은 단백질, 세포, 바이러스 등을 비롯하여 식품의 물질들이 달라붙지 못하거나, 쉽게 떨어지는 엔티파울링 응용분야에 활용이 가능하다. 또한, 향후 좀더 정밀한 나노 및 마이크로 돌기 구조를 갖는 격자 패터닝을 통해 150° 이상의 초소수성 표면을 제작하게 된다면, 자가 청소(Self-cleaning) 등의 초소수성 표면 응용분야에 활용 가능할 것이다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.143-144
• /
• 2008

We developed that the film fibers which was vacuum-metalized silver on the PET film played a part increasing durable on the alkali, antibiotic and another functional property. For this usage, PET film fibers with fine denier vacuum-metalized silver manufactured through changing the micro slitting machine's drive process.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.201-206
• /
• 2020

A SiOxCy(-H) thin film was synthesized by atmospheric pressure dielectric barrier discharge(APDBD), and a SiO₂-like layer was formed on the surface of the film by oxidation treatment using oxygen plasma. Hexamethylcyclotrisiloxane was used as a precursor for the SiOxCy(-H) synthesis, and He gas was used for stabilizing APDBD. Oxygen permeability was evaluated by forming an oxidized SiOxCy(-H) thin film on a PET film. When the single-layer oxidized SiOxCy(-H) film was coated on the PET, the oxygen gas permeability decreased by 46% compared with bare PET. In case of three-layer oxidized SiOxCy(-H) film, the oxygen gas permeability decreased by 73%. The oxygen permeability was affected by the thickness of the SiO₂-like layer formed by oxidation treatment rather than the thickness of the SiOxCy(-H) film. The excellent corrosion resistance was demonstrated by coating an oxidized SiOxCy(-H) thin film on the silver-coated aluminum PCB for light emitting diode (LED).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1425_1426
• /
• 2009

In this study, commercially available polyethylene terephthalate(PET), which is widely used as a substrate of flexible electronic devices, was modified by dielectric barrier discharge(DBD) method in an air condition at atmospheric pressure, and aluminium - doped zinc oxide (ZnO:Al) transparent conducting film was deposited on PET substrate by r. f. magnetron sputtering method. Surface analysis and characterization of the plasma-treated PET substrate was carried out using contact angle measurements, X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscopy (AFM). Especially the effect of surface state of PET substrate on some important properties of ZnO:Al transparent conducting film such as electrical and morphological properties and deposition rate of the film, was studied experimentally. The results showed that the contact angle of water on PET film was reduced significantly from $62^{\circ}$ to $43^{\circ}$ by DBD surface treatment at 20 min. of treatment time. The plasma treatment also improved the deposition rate and electrical properties. The deposition rate was increased almost linearly with surface treatment time. The lowest electrical resistivity as low as $4.97{\times}10^{-3}[\Omega-cm]$ and the highest deposition rate of 234[${\AA}m$/min] were obtained in ZnO:Al film with surface treatment time of 5min. and 20min., respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.585-586
• /
• 2012

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 춘계 학술논문발표회 논문집
• /
• pp.439-444
• /
• 2002

PET(Polyethylene terephthalate)수지는 engineering plastic으로서 film, 각종 용기 등의 소재로 널리 사용되고 있다 특히 PET의 투명성, 위생성, 내약품성, 우수한 기체 차단성, 내열성 등 우수한 물성을 이용한 음료용 PET bottle은 식음료 산업의 발전에 따라 그 사용량이 크게 증가하여 발생되는 폐기물 발생량 또한 사회문제로 대두되고 있으나 가공성의 문제로 재생원료로서의 이용이 미비한 실정이다.(중략)

• 한국진공학회지
• /
• 제8권4A호
• /
• pp.438-444
• /
• 1999

The characterization of the reactively sputtered ITO layer on the PET film has been studied. The PEM device has been used to determine the optimum stoichimetry through control of the amount of oxygen incorporated into the alloy target and the optimum operation conditions to produce films with the highest electrical conductivity and visible transparency. The PEP film was pre-treated under the plasma discharge condition to remove the adsorbed gases and to modify the surface morphology. The results revealed that by adjusting the flow rate of oxygen with the spectral intensity of indium target, the composition of plasma gas can be kept constant during the entire deposition period. The resistivity of ITO film obtained was fond to be about 37$\Omega\Box$, and the transmittance of visual range was about 86%.