• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.700-704
• /
• 2003

This paper describes on characteristics of 2" 3C-SiC wafer bonding using PECVD (plasma enhanced chemical vapor deposition) oxide and HF (hydrofluoride acid) for SiCOI (SiC-on-Insulator) structures and MEMS (micro-electro-mechanical system) applications. In this work, insulator layers were formed on a heteroepitaxial 3C-SiC film grown on a Si (001) wafer by thermal wet oxidation and PECVD process, successively. The pre-bonding of two polished PECVD oxide layers made the surface activation in HF and bonded under applied pressure. The bonding characteristics were evaluated by the effect of HF concentration used in the surface treatment on the roughness of the oxide and pre-bonding strength. Hydrophilic character of the oxidized 3C-SiC film surface was investigated by ATR-FTIR (attenuated total reflection Fourier transformed infrared spectroscopy). The root-mean-square suface roughness of the oxidized SiC layers was measured by AFM (atomic force microscope). The strength of the bond was measured by tensile strength meter. The bonded interface was also analyzed by IR camera and SEM (scanning electron microscope), and there are no bubbles or cavities in the bonding interface. The bonding strength initially increases with increasing HF concentration and reaches the maximum value at 2.0 ％ and then decreases. These results indicate that the 3C-SiC wafer direct bonding technique will offers significant advantages in the harsh MEMS applications.ions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1595-1597
• /
• 2003

This paper presents the deposition of ${\mu}c$-Si:H thin-film and fabrication of a solar cell by VHF-PECVD method. The ${\mu}c$-Si:H thin films and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from ${\mu}c$-Si:H thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, Solar cell characteristic was measured under AM1.5 illumination.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.30-30
• /
• 2000

당사는 각종 진공 장비를 개발/제작한 경험을 바탕으로 25년 동안 진공 산업 발전에 기여하여 왔으며 자체 기술로 HIGH VACUUM 응용시스템 설계 및 제작하고 있다. 이와 함께 3D CAD를 이용한 consulting 및 Modeling 분석을 수행하여, 자체 기술로 설계 및 제작 판매하고 있다. Vacuum System은 In-line System (ITO, SiO2, Cr Tio2, Ag, Al 등), Roll to Roll(Web) Sputtering system (ITO, SiO2, Ar, Metal 등), 유기 EL 박막 진공 증착 장치, PECVD System, Evaporator 시스템 등을 제작 공급하고 있다. 현재 Roll to Roll(Web) Sputtering System은 Dual Cathode를 사용하는 방식으로 개발중에 있으며, 평판 디스플레이용 대면적 Glass를 위한 In-line Sputtering System을 같이 개발하고 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.830-833
• /
• 2003

This paper describes the fabrication and characteristics of 3C-SiCOI sotctures by SDB and etch-back technology for high-temperature MEMS applications. In this work, insulator layers were formed on a heteroepitaxial 3C-SiC film grown on a Si(001) wafer by thermal wet oxidation and PECVD process, successively. The pre-bonding of two polished PECVD oxide layers made the surface activation in HF and bonded under applied pressure. The wafer bonding characteristics were evaluated by the effect of HF concentration used in the surface treatment on the roughness of the oxide and pre-bonding strength. Hydrophilic character of the oxidized 3C-SiC film surface was investigated by ATR-FTIR. The strength of the bond was measured by tensile strengthmeter. The bonded interface was also analyzed by SEM. The properties of fabricated 3C-SiCOI structures using etch-back technology in TMAH solution were analyzed by XRD and SEM. These results indicate that the 3C-SiCOI structure will offers significant advantages in the high-temperature MEMS applications.

• 한국광학회지
• /
• 제8권6호
• /
• pp.500-505
• /
• 1997

광 수신기를 전자 논리 소자에 집적하기 위하여 발생되는 여러 문제점들을 개선하기 위하여 a-Si:H p-i-n 구조를 사용하여 CMOS IC위에 비정질 광 수신기를 제작하였다. 비정질 물질인 a-Si:H을 도입함으로써 PECVD와 같이 저온 공정을 진행하는 장비를 사용할 수 있도록 하여 이미 제작된 IC의 특성이나 구조 특히 금속 배선을 파괴하지 않으면서 집적할 수 있게 하였다. CMOS IC 위에 제작된 비정질 p-i-n 광 수신기는 양호한 순방향 전압 특성을 가지고 있었으며 누설 전류는 약 0.1$\mu\textrm{A}$ 정도, 항복 전압 -20V 이하의 특성을 보였다. 또한 레이저 다이오드 광 신호에 대한 광 수신기의 광 반응 특성을 실험하여 광 신호 검출을 조사함으로써 1V 이하의 작은 전압 스위칭을 통하여 광 검출의 On/Off를 제어할 수 있음을 관찰하였다. 이러한 특성을 이용하면 현재 광 도파로에서 빛 신호를 스위칭 하거나 modulation 할 때 발생하는 고전압 관련 문제점들을 해결할 수 있기 때문에 광 스위치로도 유용하게 이용될 수 있을 것으로 생각되며 나아가서는 광 interconnection에 매우 유용할 것으로 사료된다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.69-72
• /
• 2012

In this study, deposition of low-dielectric constant SiOC(H) films by conventional plasma-enhanced chemical vapor deposition (PECVD) were investigated through various characterization techniques. The results show that, with an increase in the plasma power density, the relative dielectric constant (k) of the deposited films decreases whereas the refractive index increases. This is mainly due to the incorporation of organic molecules with $CH_3$ group into the Si-O-Si cage structure. It is as confirmed by FT-IR measurements in which the absorption peak at 1,129 $cm^{-1}$ corresponding to Si-O-Si cage structure increases with power plasma density. Electrical characterization reveals that even after fast thermal annealing process, the leakage current density of the deposited films is in the order of $10^{-11}$ A/cm at 1.5 MV/cm. The reliability of the SiOC(H) film is also further characterized by using BTS test.

• 센서학회지
• /
• 제13권4호
• /
• pp.264-269
• /
• 2004

This paper describes on an advanced technology of 3C-SiC/Si(100) wafer direct bonding using PECVD oxide to intermediate layer for SiCOI(SiC-on-Insulator) structure because it has an attractive characteristics such as a lower thermal stress, deposition temperature, more quick deposition rate and higher bonding strength than common used poly-Si and thermal oxide. The PECVD oxide was characterized by ATR-FTIR. The bonding strength with variation of HF pre treatment condition was measured by tensile strength measurement system. After etch-back using TMAH solution, roughness of 3CSiC surface crystallinity and bonded interface was measured and analyzed by AFM, XRD, and SEM respectively.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1010-1013
• /
• 2006

Hydrogenated Diamond-like carbon (DLC) films were Prepared by the radio frequency plasma enhanced chemical vapor deposition (RF PECVD) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas for the application to solid lubricant of MEMS devices. We have checked the influence of varying RF power on tribological properties of DLC film. We have checked their performance as two kinds of method such as FFM (Friction Force Microscope) and BOD (Ball-on Disk) measurement. The friction coefficients and the contact number of cycles to steady state decreased as the increase of RF power with FFM and BOD measurement, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.198-200
• /
• 2015

The microwave plasma enhanced chemical vapor deposition (PECVD) system was used to grow a carbon nanowall (CNW) on a silicon (Si) substrate with hydrogen (H₂) and methane (CH₄) gases. To find the growth mechanism of CNW, we increased the growth time of CNW from 5 to 30 min. The vertical and surficial conditions of the grown CNWs according to growth time were characterized by field emission scanning electron microscopy (FE-SEM). Energy dispersive spectroscopy (EDS) measurements showed that the CNWs consisted solely of carbon.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.751-756
• /
• 2001

Carbon nanotubes(CNTs) was successfully grown on Ni coated silicon wafer substrate by PECVD technique(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni thin film of thickness ranging from 15∼30nm was prepared by electron beam evaporator system. In order to find the find the optimum growth condition, initially two different types of gas mixtures such as C$_2$H$_2$-NH$_3$ and C$_2$H$_2$-NH$_3$-Ar were systematically investigated by adjusting the gas mixing ratio in temperature of 600$^{\circ}C$ under 0.4 torr. The diameter of the grown CNTs was 40∼200nm. The diameter of the CNTs increases with increasing the Ni particles size. TEM images clearly demonstrated synthesized nanotubes to be multiwalled.