• Textile Coloration and Finishing
• /
• v.31 no.3
• /
• pp.195-213
• /
• 2019

The purpose of this study was to identify novel extracts of brawn algae with the high deodorant capacity and antioxidant activity. To achieves this, an composition, deodorant performance and free radical scavenging activity were analyzed in powder and water extracts of Ecklonia cava(PEC/EEC), Saccharina japonica(PSJ/ESJ), Eisenia bicyclis(PEB/EEB), Sargassum spp.(PSS/ESS) and Hizikia fusiformis(PHF/EHF) using several analytical methods. Major component of five powders was verified as PEC, phlorotannin; PSJ, alginic acid and glutamic acid; PEB, carotenoid, chlorophyll, phlorotannin, tocopherol and fucoxantin; PSS, ${\beta}$-carotene and polyphenol; PHF, tannin. The highest level of DPPH scavenging activity was detected in EEC($IC_{50}=23.018{\mu}g/ml$), followed by EEB, ESJ, EHF and ESS. The deodorizing performance to ammonia was maintained high level in PEC, PSJ, PEB and PSS, while PHF showed low level in the same condition. But, the deodorizing performance to acetic acid was slightly higher in PSJ and PEC than those of PEB, PSS and PHF. Based on the results of DPPH scavenging activity and deodorizing capacity, we selected fractions of S. japonica as leading extracts and further prepared the 70% acetone extract (AESJ) and 70% ethanol extract (EESJ) from PSJ. The contents of total flavonoid, total phenol and total condensed tannin was significantly increased with 112-209% in AESJ and EESJ compared to those of ESJ. Also, a similar enhancement was observed on the level of DPPH scavenging activity and deodorizing performance against ammonia/acetic acid in AESJ and EESJ. Therefore, these results suggest that AESJ and EESJ contained with high total phenol and total condensed tannin contents may exhibit high deodorant capacity and antioxidant activity as well as has the potential for use as a powerful biomaterial for antibacterial deodorant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.68-72
• /
• 2003

In this paper, we developed a new thick photoresist fabrication technology for 3-dimensional microstructures. In general, like as AZ photoresist was coated with thin film thickness about 1 $\mu\textrm{m}$ to 30 $\mu\textrm{m}$, but photoresist like SU-8 has thickness of several tens $\mu\textrm{m}$ or more and high aspect ratio. When we fabricate a microstructure using the thick photoresist like SU-8, cracks on the SU-8 thick photoresist are appeared by stress which was caused by sudden cooling down during bake of the thick photoresist spun on wafer. Thus, it was hard to fabricate the microstructure using the thick photoresist for electroplating. In this paper, we developed a new process to produce a 3-dimensional microstructure without the crack by stress through a suitable thick photoresist coating, time control of cool down and time control of PEB (Post Expose Bake).

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.487-493
• /
• 2004

The distribution of particles, in the mixture of poly(ethyl acrylate-co-t-butyl acrylate) (PEB) emulsion polymer and silica nanoparticles, was determined mainly depending on the pH of the mixture. The weak interfacial interaction was responsible for the severe coagulation of silica particles and the irregular dispersion for these nanocomposites. Methacryloxypropyltrimethoxysilane (MPS) was used to modify both the polymer and the silica. The nanocomposites which were prepared with these modified components had finer dispersion of silica nanoparticles and core-shell morphology due to the strong interfacial interaction. The strong hydrogen bonds were identified for these nanocomposites with FT-IR. The nanocomposites having strong interfacial interaction showed the increased glass transition temperature, the decreased ΔC$_{p}$ , and the increased decomposition temperature of the polymer chains. polymer chains.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.549-558
• /
• 2007

Hook bolt brace is being used to construct pre-engineered building's (PEB) systematic frames in steel factory building, but they pose difficulties in terms of their structural performance. There are also few studies on their behavior and there is a need to develop elementary techniques by conducting loading tests on other types of braces (e.g., rod bar, rod shoe, angle), which is used in Japan and the USA. Its structural performance is compared with that of current hook bolt-type brace. Therefore, in this study, we present a basic step in the structural performance of these specimens to examine its performance qualitatively and theof application to PEB frames.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.2
• /
• pp.193-201
• /
• 2009

Structural design of most nonprismatic Pre-Engineered Building Systems (PEBS) is performed using optimizing software developed in foreign countries. In this study, a structural optimizing software for the design of 3-D structures of nonprismatic PEBS is developed according to the allowable stress design method of AISC2005 and KBC. Optimizing structural design with nonprismatic members is carried out by repeating the process of structural analysis and member design to minimize the weight of a structure. According to the optimizing design results of 2-D and 3-D structures with nonprismatic members, there are considerable steel savings in designing structures with nonprismatic H-shaped built-up sections rather than with H-shaped rolled sections. When H-shaped built-up sections were used, the weight of the structural steel was reduced when AISC2005 specification rather than AISC1898 was used in the design. It is therefore concluded that utilizing the new AISC2005 specification is safer in preventingweb buckling because the height of a member is designed to be small despite some differences depending on the structural type.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.23-30
• /
• 1999

We experimented on the sub 50nm patterning using E-beam lithography system. SAL601 negative E-beam resist was used for this experiment. In order to utilize the maximum ability of E-beam system, firstly, we reduced the PR thickness to 100nm, and the field size to 200 ${um}m$. Then PEB (Post Expose Bake) time/temperature, which is one of the very important factors when SAL601 is used, were reduced for minimum line width. In addition, digitizing is optimized for better results. Quantum wire and quantum dot which can be used for nanoscale memory device, such as single electron memory device, are fabricated using these developed lithography techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3619-3626
• /
• 2015

The coal shed at thermal power plant(T.P.P) is the biggest building on size among nuclear, coal and other power plant industry buildings. This the coal shed of indoor type is mass volume, the size of 6 soccer fields and 73 meter in height. Structural and functional elements take priority over aesthetic factors. The shed is built to make mighty space for structural safety and functional store by using the concrete, $75,000m^3$ on the total of central retaining wall and sub buttress, and the steel frame used by 11,744-ton P.E.B. system. The design requirement on its wall and frame, P.E.B. system's feature, and specific data of main process followed by construction are inquired. The aim of this study is to suggest the design requirement and guide for the indoor type of the coal shed.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.238-242
• /
• 2002

본 논문에서는 3차원 마이크로구조물을 위한 새로운 Thick Photoresist(TPR) 공정 기술을 개발하였다. 일반적으로 Thin Photoresist는 얇은 두께로 코팅을 할 수 있다. 그러나 SU-8과 같은 TRP은 몇 십 ㎛ 또는 그 이상으로 코팅이 가능하고 높은 종횡비를 얻을 수 있다. SU-8과 같은 TPR을 사용하여 마이크로구조물을 제작할 때 TPR의 crack들은 bake시의 갑작스런 tool down에 의한 stress에 의해 나타나는데, 이러한 crack들은 마이크로구조물의 도금을 어렵게 만든다. 본 논문에서는 TPR의 코팅, baking 시간 조절, cool down과 PEB(Post Expose Sake) 시간 조절을 통하여 stress에 의해 발생되는 crack이 없는 3차원 마이크로구조물을 제작할 수 있는 새로운 공정 기술을 개발하였다.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.158-158
• /
• 2006

The correlation between liquid-liquid phase separation (LLPS) and crystallization at several compositions in statistical copolymer blends of poly (ethylene-co-hexene) (PEH) and poly (ethylene-co-butene) (PEB) has been examined. In this case, the LLPS is coupled with the other ordering process, i.e. crystallization. The overwhelming change in the crystallization kinetics due to the composition fluctuation caused by the spontaneous spinodal LLPS is observed. This coupling mechanism suggests a new mechanism in the nucleation-crystallization process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.536-538
• /
• 2015

전기 에너지가 우리 생활에 유용하게 사용되는 부분이 정말 많다. 최근에는 자전거 열풍이 불면서 덩달아 전동 자전거 업계에도 호황이 일고 있는데, 21C 기후 변화와 환경오염, 교통체증 등의 문제해결을 위한 저탄소 녹색성장의 인식 전환으로 전동 자전거 이용이 늘어나고 있다. 이는 전동 자전거도 전기 에너지가 사용되고 있다 점이다. 하지만 이런 장점을 가지고 있는 전동 자전거를 많은 사람들이 구입하지 못하는 이유가 있다. 대부분의 이유가 '집에 자전거 1대씩 가지고 있는데, 굳이 비싼 돈을 주고 전동 자전거를 구입해야하나?' 라는 생각을 가지게 된다. 또 다른 이유로는 기존의 전동 자전거가 탈 부착 형식이 아닌 일체형으로 나오기 때문에 다른 신제품의 전동 자전거가 나온다면 기존의 전동 자전거의 부품을 사용하지 못 하고 새로운 자전거를 사야 한다는 단점 때문이다. 따라서 본 논문에서는 탈 부착이 가능한 전기 자전거 시스템을 구현하고자 한다.