• Journal of Korean Society of Water and Wastewater
• /
• 제22권3호
• /
• pp.351-358
• /
• 2008

The modified in-line mixer which was suggested in this study for small water treatment facilities was evaluated on the performance of coagulation. For the objectives of this research, computational fluid dynamics(CFD) simulation was applied for analysis of flow characteristics within the modified in-line mixer. For verifying the results of CFD simulation, wet tests for the pilot plant were conducted. The wet test was to measure the actual coagulant dispersion distribution on the overall cross-section at a distance of 5.5D from the chemical injection point. From the results of CFD simulation and wet test, it was shown that the coagulant dispersion within the modified in-line mixer was occurred more uniformly than within the existing PDM(Pump diffusion Mixer). The results have confirmed the modified in-line mixer had several advantages compared with the existing PDM in terms of dispersion efficiency.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.246-248
• /
• 2002

This paper presents a high-frequency voltage source inverter for silent corona discharge ozonizer application, which is characterized by the power control based on pulse density modulation (PDM). The PDM inverter produces either a square -wave ac-voltage state or a zero-voltage state at its ac terminals to control the average output voltage under constant do voltage and operating frequency. This results in a wide range of power control in the silent corona discharge load with a strong nonlinear characteristics. And proposed addition circuit for maintain discharge on the center of the airgap. In this paper, schemed equivalent electric circuit of the discharge electrode for simulation. Finally, the effectiveness of this discharge tube character of silent corona ozonizer is investigated in the simulation results.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.45-45
• /
• 2018

홍합, 따개비 등의 접착성 해양생물은 선박의 하부나 발전소 해수 공급용 튜브에 부착하여 운영 효율을 저하 시키고, 냉각기기 고장을 유발하는 파울링(Fouling) 문제를 야기시킨다. 일반적으로 이러한 문제에 대응하기 위해서 초접착성 해양생물이 주로 부착하는 부위에 $Cu_2O$, ZnO 등을 포함한 유기화합물로 표면처리를 하여 부착방지를 하고 있지만, 이 소재들을 장시간 사용 시 해양 오염 및 부식을 가속화하는 문제를 초례하기 때문에 최근에는 사용을 금지하고 있다. 이러한 유해성 소재 문제를 해결하고자 친환경적이고 부작용이 없는 초접착성 해양생물 부착방지 소재를 개발하고자 하였다. 본 연구에서는 낮은 표면장력을 갖는 PDMS(Polydimethylsiloxane) 소재를 기반으로 소수성 oil을 침투시킨 I-PDMS(Oil-Polydimethylsiloxane) 표면처리법을 고안하였고, 이 방법을 활용하여 초접착성 해양생물에 대한 부착방지 성능을 향상시키고자 하였다. 기존의 개발품들 보다 성능이 향상된 I-PDMS 제조하고자, Nano-indentation을 이용한 기계적 특성 평가, X컷 및 cross-cut을 이용한 부착력 평가, 실제 바다환경에서 해양생물의 부착력 시험, 바다 환경을 모사한 수조에서의 I-PDMS와 비교군 기판에서의 홍합 거동, 홍합과 기판의 접착강도 시험, 해양 미생물 평가를 실시하였으며, 이를 통해서 I-PDMS 성능 및 내구성을 입증하고자 하였다.

• Journal of KIISE:Computing Practices and Letters
• /
• 제7권5호
• /
• pp.383-391
• /
• 2001

The value of XML as electronic documents is increasing nowadays. The XML document has properties of semistructured data. It can be modeled as object-oriented model which can be easily adapted by object-oriented database. For storing XML documents to conventional database system, extracting schema information from the DTD of a XML document has been studied for several years. In this paper we store XML documents into object-oriented database, which preserve the semantics of the documents. We can store and query by OQL and make applications by C++ and make applications by C++ binding which is the access method of object-oriented database. Therefore, existing database applications can be used without modification.

• Journal of the Society of Naval Architects of Korea
• /
• 제46권1호
• /
• pp.43-56
• /
• 2009

The Korean navy has made many efforts to apply the concepts of PLM (Product Lifecycle Management) and M&S to its naval design and production. However, most of the efforts that have being applied to some acquisition processes, focused only on the element technologies without information models and data frameworks. This study discusses an information model of naval ships for advanced naval acquisitions. We introduce a naval ship product model, and it refers to the DPD (Distributed Product Description) concept of SBA (Simulation-Based Acquisition). To realize the product model concept, we design a data architecture and develop a Product Model Management System (PMMS) based on a PDM System. It is validated through the case study of building the product model of the battle ship that the PMMS has the applicability to effectively manage the naval ship acquisition data on the basis of a 3D product model.

• Journal of the Korean Society of Systems Engineering
• /
• 제2권2호
• /
• pp.45-50
• /
• 2006

Tilting technology is to tilt the train on the curve in order to minimize centrifugal force to passengers and to improve the speed within the limits of passenger's comfort and safety. According to reports from other countries, there is 15~30% speed improvement compared to the conventional trains. Recently, the advent of World-Wide-Web(WWW) and the explosive popularity of the Internet gave birth to collaborative applications which were enabled by computers and networks as their primary media. The progress of 3D computer graphics enabled collaborative applications with 3D virtual environments or distributed virtual environments. In this paper, we explain our implementation of the Share collaboration engine which is for collaboration applications based on a distributed virtual environment. The Share collaboration engine proposes a new Share network architecture for management of participants, and it provides some synchronization methods for 3D objects in virtual collaboration. TTX_PDM is an experimental application that tries to prevent wastes of human, material and time resources in networked virtual collaboration.

• Korean Journal of Optics and Photonics
• /
• 제26권5호
• /
• pp.255-260
• /
• 2015

We have fabricated an optoacoustic ultrasound generator based on nanostructured germanium (Ge). Ge thin films were deposited via e-beam evaporation and then etched using a metal-assisted chemical (MAC) method to form nanostructured Ge films. The measured intensity of ultrasound from the nanostructured Ge covered with PDMS was about 3 times stronger than that of 100-nm-thick chromium (Cr). When the nanostructured Ge was embedded in the PDMS, the intensity of ultrasound became 8.5 times as strong compared to the 100-nm-thick Cr.

• Journal of Digital Convergence
• /
• 제8권4호
• /
• pp.73-82
• /
• 2010

Auto-industry is very difficult to standardize item code generation rule, because it has more than 20,000 parts in this industry. As finished good companies have already used the ERP system such as SAP, they have a good Master Data Management(MDM) system. However, since many supplier companies have poor MDM system, they have a lot of barriers on system implementation like ERP, MES. PDM systems. This study surveys various benchmarking sites and investigates the standardization of item code of the auto-parts manufacturing companies. Finally, this study proposes the implementation guide (IMG) of auto-industry MDM standardization.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1386-1387
• /
• 2006

PDMS와 ITO 유리를 이용하여 continuous-flow PCR chip을 제작하였다. PDMS를 이용하여 microchannel을 형성하여 주었고, ITO electrode를 heater와 sensor로 사용하기 위하여 반도체 공정을 통해 패턴을 형성하였다. microchannel내에 흐르는 시료의 온도를 제어하기 위하여 heater와 sensor를 calibration을 하였다. ITO heater는 인가된 전압에 대해 매우 선형적인 발열을 하였으며, ITO sensor는 온도에 대해 선형적인 저항 변화를 나타낸 바, 그 결과 continuous-flow PCR chip의 정확한 온도 제어가 가능하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.481-484
• /
• 2004

이 논문에서는 소포 배달 서비스를 위한 인텔리전트 모니터링 시스템(Intelligent Monitoring and Control System; IMCS)에 대해 기술한다. IMCS 는 GIS, GPS 그리고 무선 통신 기술을 이용하여 택배의 접수와 배달 업무를 효율적이고 효과적으로 개발하기 위한 시스템이다. IMCS는 모두 세개의 서브 시스템으로 구성되어 있는데 접수와 배달 계획을 수립하는 PDPS(Pick-up and Delivery Planning System)과 접수/배달 현황과 차량의 위치를 파악할 수 있는 PDMS(Pick-up and Delivery Monitoring System), 그리고 개인휴대단말기(PDA)을 이용한 실시간 업무 처리 시스템인 MOCS(Mobile Operations and Communication System)으로 구성되어 있다. PDPS는 GIS와 최적화 알고리즘을 이용하여 접수와 배달을 위한 방문 순서와 경로 그리고 고객에게 방문할 예정시간 등을 생성한다. MOCS에서는 GPS와 무선 통신을 이용하여 업무 중 발생한 접수/배달 결과와 위치 정보를 실시간으로 PDMS에 전송하고 바코드 스캐닝과 전자 서명 등의 업무를 지원한다. PDMS에서는 수신한 정보에 따라 소포의 접수/배달 현황과 차량의 위치를 전자지도 상에 표현하고 업무 차량의 이동 궤적을 표시하여 계획된 경로와 비교하여 모니터링하고 관제할 수 있다. 현재 IMCS는 국내 한 우체국에서 시범 운영되고 있다.