• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.179-182
• /
• 2007

Polycrystaline (poly) 3C-SiC thin film on n-type and p-type Si were deposited by APCVD using HMDS, $H_2$, and Ar gas at $1180^{\circ}C$ for 3 hour. And then the schottky diode with Au/poly 3C-Sic/Si(n-type) structure was fabricated. Its threshold voltage ($V_d$), breakdown voltage, thickness of depletion layer, and doping concentration ($N_D$) value were measured as 0.84 V, over 140 V, 61nm, and $2.7{\times}10^{19}\;cm^3$, respectively. The p-n junction diode fabricated by poly 3C-SiC was obtained like characteristics of single 3C-SiC p-n junction diode. Therefore, its poly 3C-SiC thin films are suitable MEMS applications in conjuction with Si fabrication technology.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.816-825
• /
• 1998

This study surveys the thermal property and air permeability to the weight reduction rate of PET fabrics. For this purpose, 12 kinds of satin and 18 kinds of plain weave fabrics are prepared with change of the physical properties such as weft yarn count, t.p.m. and density. The weight reduction rate was 0%, 12%, 25% and 30%. The warm/cool feeling(Qmax), thermal insulating value(T.I.V.) and thermal conductivity(K) were measured by KES-F7 System and discussed in relation with the weight reduction rate, weft yarn linear density, t.p.m., weft density of fabric and weave structure.

• 공업화학
• /
• 제30권4호
• /
• pp.472-478
• /
• 2019

막 축전식 탈염(MCDI) 셀에 공급하는 총 전하(TC)를 조절하여 경도물질($Ca^{2+}$)을 안정하게 탈염할 수 있는 방법을 연구하였다. 흡착과정에서 TC를 변화시키면서 흡착(1.5 V)과 탈착(0.0 V)을 30회 반복하였다. 탈염과정에서 유출수의 농도와 pH, 흡착 및 탈착량, 전류밀도와 셀 전위의 변화를 분석하였다. MCDI 셀에 사용된 탄소전극의 최대허용전하(MAC)는 46 C/g로 측정되었다. MAC 이하의 TC (40 C/g)에서 운전한 결과 전극반응이 일어나지 않아 장기간 운전에서도 안정적인 탈염특성을 얻을 수 있었다. 반면, MAC 이상의 TC (50, 60 C/g)에서 운전한 경우 유출수의 농도와 pH가 크게 변하였다. 또한 전극반응으로 인해 전극표면에 스케일이 생성되어 셀의 전기저항이 점차 증가하였다. 이를 통해 흡착과정에서 MCDI 셀에 공급하는 전하를 제어함으로써 전극반응 없이 경도물질을 안정하게 제거할 수 있음을 확인하였다.

• 대한수학회보
• /
• 제50권1호
• /
• pp.37-56
• /
• 2013

This paper deals with the behavior of positive solutions to the following nonlocal polytropic filtration system $$\{u_t=(\mid(u^{m_1})_x{\mid}^{{p_1}^{-1}}(u^{m_1})_x)_x+u^{l_{11}}{{\int_0}^a}v^{l_{12}}({\xi},t)d{\xi},\;(x,t)\;in\;[0,a]{\times}(0,T),\\{v_t=(\mid(v^{m_2})_x{\mid}^{{p_2}^{-1}}(v^{m_2})_x)_x+v^{l_{22}}{{\int_0}^a}u^{l_{21}}({\xi},t)d{\xi},\;(x,t)\;in\;[0,a]{\times}(0,T)}$$ with nonlinear boundary conditions $u_x{\mid}{_{x=0}}=0$, $u_x{\mid}{_{x=a}}=u^{q_{11}}u^{q_{12}}{\mid}{_{x=a}}$, $v_x{\mid}{_{x=0}}=0$, $v_x|{_{x=a}}=u^{q21}v^{q22}|{_{x=a}}$ and the initial data ($u_0$, $v_0$), where $m_1$, $m_2{\geq}1$, $p_1$, $p_2$ > 1, $l_{11}$, $l_{12}$, $l_{21}$, $l_{22}$, $q_{11}$, $q_{12}$, $q_{21}$, $q_{22}$ > 0. Under appropriate hypotheses, the authors establish local theory of the solutions by a regularization method and prove that the solution either exists globally or blows up in finite time by using a comparison principle.

• Annals of Clinical Neurophysiology
• /
• 제19권1호
• /
• pp.28-33
• /
• 2017

Background: Previous studies of radial nerve conduction study (NCS) did not present how to measure the length of the radial nerve across the elbow, and did not even mention how to manage the spiral course of the nerve. This study aimed to applicate the most reliable method to measure the length of the radial nerve during NCS. Methods: Three points (A, B, and C) were determined along the relatively straight course of the radial nerve. The distance was measured using three different methods: L1) straight distance corresponding to the A-C distance, L2) sum of the distances corresponding to the A-B-C distance, L3) based on the L2, but the elbow is flexed at a $45^{\circ}$ angle. We compared the three methods of distance measurement and the calculated nerve conduction velocities (V1, V2, and V3) in normal healthy subjects. Results: 19 normal participants were enrolled. The mean value for method L1, L2 and L3 were $22.5{\pm}1.8cm$, $24.0{\pm}2.1cm$, and $23.2{\pm}2.1cm$ (p < 0.001). Calculated conduction velocities using those distance measurement methods as follows (p < 0.001): V1 ($60.9{\pm}2.7m/s$), V2 ($64.6{\pm}3.3m/s$), and V3 ($63.4{\pm}3.9m/s$). V2 was significantly greater than V1 and V3 (p < 0.001, p = 0.010, respectively). Conclusions: The distance measurement using a stopover point near the lateral epicondyle between two stimulus points in position of a fully extended elbow with forearm pronation is the most appropriate posture for radial motor NCS.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.253-257
• /
• 2010

The frequency is an important operation parameter for the control, protection, and stability of a power system. The frequency as a key index of power quality can be indicative of system abnormal conditions and disturbances. Due to the sudden change in generation and loads or faults in power system, the frequency is supposed to deviate from its nominal value. It is essential that the frequency must be maintained very close to its nominal frequency. An accurate monitoring of the power frequency is essential to optimal operation and prevention for wide area blackout. As most conventional frequency estimation schemes are based on DFT filter, it has been pointed out that the gain error could cause defects when the frequency is deviated from nominal value. This paper presents an advanced frequency estimation technique using gain compensation to improve the performance of DFT filter based techniques. To evaluate performance of the proposed algorithm, the 765kV T/L system in Korea is simulated by EMTP-RV software. The proposed technique can reduce the gain error caused when the power system frequency deviates from nominal value.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.16-19
• /
• 2003

실온에서 p-InP (100) 위에 이온빔 증착법으로 Ni 박막을 성장하였다. Ni 박막의 이차전자방출계수(${\gamma}$)와 일함수를 결정하기 위하여 Ne, Ar, $N_2$, Xe 이온원을 사용하여 가속전압에 따른 $\gamma$를 측정하였다. 여러 가지 기체와 집속이온빔장치의 가속전압에 따른 $\gamma$결과로부터 Ni 박막의 일함 수를 결정하였다. p-InP (100) 위에 성장한 Ni 박막의 일함수는 5.8 eV ~ 5.85 eV 이었다. 실험을 통하여 얻어진 결과들은 실온에서 p-InP (100) 위에 성장한 Ni 박막의 전자적 성질에 관한 중요한 정보를 제공하고 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권3호
• /
• pp.135-146
• /
• 2008

본 연구에서는 에폭시 모르타르 패널을 철근콘크리트 보부재의 전단 보강재로 사용하기 위하여 보강재의 종류와 보강량, 탄소섬유시트의 간격을 변수로 가력실험을 수행하고 부재의 구조적 성능을 파악하였다. 이를 바탕으로 에폭시 모르타르 패널을 철근콘크리트 보부재의 전단 보강재로 사용하기 위한 설계 방법은 $V_c$, $V_s$, $V_{sheet}$, $V_p$의 합으로 전단강도를 가정하였으며, 연구결과에 대한 실험값/제안값의 평균값은 1.10, 표준편차는 8.16%로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3399-3404
• /
• 2013

A new accepter unit, pyrrolo[3,2-b]pyrrole-2,5-dione, was prepared and utilized for the synthesis of the conjugated polymers containing electron donor-acceptor pair for OPVs. Pyrrolo[3,2-b]pyrrole-2,5-dione unit, regioisomer of the known pyrrolo[3,4-c]pyrrole-1,4-dione, is originated from the structure of stable synthetic pigment. The new conjugated polymers with 1,4-diphenylpyrrolo[3,2-b]pyrrole-2,5-dione, thiophene and carbazole were synthesized using Suzuki polymerization to generate P1 and P2. The solid films of P1 and P2 show absorption bands with maximum peaks at about 377, 554 and 374, 542 nm and the absorption onsets at 670 and 674 nm, corresponding to band gaps of 1.85 and 1.84 eV, respectively. To improve the hole mobility of the polymer with 1,4-bis(4-butylphenyl)-pyrrolo[3,2-b]-pyrrole-2,5-dione unit, which was previously reported by us, the butyl group at the 4-positions of the N-substituted phenyl group was substituted with hydrogen and methyl group. The field-effect hole mobility of P2 is $9.6{\times}10^{-5}cm^2/Vs$. The device with $P2:PC_{71}BM$ (1:2) showed $V_{OC}$ value of 0.84 V, $J_{SC}$ value of 5.10 $mA/cm^2$, and FF of 0.33, giving PCE of 1.42%.

• 한국가금학회지
• /
• 제21권3호
• /
• pp.157-168
• /
• 1994

This study was carried out to elucidate the time course variation of vitamin $D_{3}$ (V$D_{3}$) and 25-hydroxyvitamin $D_{3}$ [25(OH)$D_{3}$] contents in the liver and skeleton of 3-wk old broiler chicks when treated with different UV irradiation procedure. Day-old Hubbard chicks were fed vitamin D deficient diet for 3 wk and exposed to medium wave ultraviolet(UVB) light with different irradiation procedures. Procedure I was 30 min continuous irradiation(O.204 mJ /$cm^{2}$) and Procedure II was three seperate 10 min irradiation with 12 h intervals, and Procedure III was three seperate 10 min irradiation with 24 h intervals. The liver and skeleton samples were collected at 10 different times between 0000~2400 h after the last irradiation. The V$D_{3}$ and 25(OH)$D_{3}$ fractions wereseparated by Sep-Pak silica cartridge and the concentrations were determined by normal phase HPLC. The mean content of V$D_{3}$ in the liver of the birds treated by Procedure II was 6.68 ng /g, which was higher than 5.60 and 5.30 ng /g from Procedure I and Ill, respectively(P<.O5). With regard to the effect of elapsed time after UVB irradiation on the V$D_{3}$ concentration of the liver, 96 h treatment showed the highest value(13.08 ng/g)(P<.05). There was a significant(P$D_{3}$ were significantly(P$D_{3}$ in the skeleton of tibia and femur, there were no significant differences among Procedure I, II and III, but significant differences were found among those from various elapsed time after irradiation, The highest value was shown at 96 h(O.99 ng /g) treatment, and interaction between irradiation procedure and elapsed time was not significant. With regard to the mean content of 25(OH)$D_{3}$ in bone, the Procedure II(18.79 ng /g) and III(17.73 ng /g) showed higher values than Procedure I did (P<.05), and the 12 h elapsed time showed the highest value(31.17 ng /g) among 10 treatments (P<.05), however, there was no significant interaction between exposing procedure and elapsed time. In conclusion, the Procedure II would he more desirable than Procedure I or III to produce more V$D_{3}$ and 25(OH)$D_{3}$ in the liver and skeleton of birds by exposing to the UVB light. Also, it was verified that 25(OH)$D_{3}$ increases more quickly than V$D_{3}$ in both tissues tested and is utilized more quickly to recover from the rickets of chicks.