• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.261-270
• /
• 2013

Purpose: Adsorption properties of lysozyme and albumin according to physiochemical properties of commercial contact lens classified with the FDA categories and a contact lens fabricated in the laboratory were investigated. Methods: The contact lens were prepared using HEMA(2-hydroxyethyl methacrylate) and TRIM(3-(trimethoxysilyl) propyl methacrylate) in a cast mold. Artificial tears containing lysozyme and albumin were prepared. We measured the amounts of protein adsorbed on the each lenses with varying adsorbed time (48 hour) and the pH range (6, 6.8, 7.4, 8.2, 9) of artificial tear. Amount of the proteins absorbed on the contact lenses were measured by using HPLC. Results: Time to reach the equilibrium of protein adsorption for silicone hydrogel lens was taken longer than hydrogel lens. The amount of adsorbed both lysozyme and albumin at equilibrium were greater for the hydrogel lens than the silicone hydrogel lens, and larger for the ionic lens than the non-ionic lens. Lysozyme was more adsorbed on the higher water content of contact lens, whereas albumin was more adsorbed on the lower water content of contact lens. Only lysozyme was adsorbed on the Group IV hydrogel lens of ionic higher water content. The adsorption of protein on contact lens increased with pH of artificial tears as close to the isoelectric point of each protein. Conclusions: The adsorption amount of lysozyme is more affected by the ionic strength of the contact lens surface than the water content of contact lens. Albumin adsorption is more affected by water content than the ionic strength of the contact lens surface. For the adsorption of proteins on the silicone hydrogel lens, the pore size, determined both by the number of Si atoms and the chemical structure of the silicone-containing monomers, as well as the polarity of contact lens should be also considered.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.581-596
• /
• 1994

This in vitro study was undertaken to obtain optimal tetracycline concentration that aids proliferation and spreading of human periodontal ligament cells, for clinical application in root surfaces of periodontally diseased teeth. Periodontal ligament cells used in this study were obtained from explants of periodontal ligament of 1st premolar teeth which were extracted for the purpose of orthodontic treatment. The cells were cultured in Dulbecco's Modified Eagle Medium(DMEM) supplemented with 100 U/ml penicillin, $100\;{\mu}g/ml$ streptomycin and 10% FBS at $37^{\circ}C$, 100% humidity, 5% $CO_2-95%$ air. Cells were used between the third to 4th passage. After root planing of periodontally extracted teeth, the root slabs were cut with carborundum disk. In the cell proliferation experiment, experimental groups were root planing only group, immersed groups in 25, 50, 75, 100, 150mg/ml aqueous solution of Tetracycline HCl followed by a vigorous rinse in PBS. Human PDL cells at concentration of $1{\times}10^5\;cells/ml$ were seeded in each culture well which contained root slabs and incubated for 6 hours. Then, all of the root slabs were moved into new 24 culture well and incubated 24, 48 and 72 hours. The cell counting was done by inverted phase contrast microscope after trypsinization. The following results were obtained. The cell number was increased in order root planing only group, 25, 150, 50, 75, 100mg/ml of Tetracycline HCl treated group in 24, 48 and 72 hours. The maximal cell number was obtained when the root slabs were immersed in solution with 100mg/ml of Tetracycline HCl. There were statistically significant between the root planing only group and 75, 100 mg/ml of Tetracycline HCl treated group in 24 hours, between the root planing only group and 100mg/ml of Tetracycline HCl treated group in 48 hours, between the root planing only group and 50, 75, 100mg/ml of Tetracycline HCl treated group, between 25 and 100mg/ml of Tetracycline HCl treated group in 72 hours(p<0.05). In the cell spreading experiment, after 30 minutes of incubated, in the root planing only group, the cells were generally round in shape. The cell surface was mostly covered with blebs. The cells started to attach to root surface by cytoplasmic extension in 50, 100mg/ml of Tetracycline HCl treated groups, more numerous cells attached to root surface than root planing only group. Many orifices of dentinal tubule were exposed, cells showed radially spreaded cytoplasm and unspreaded central region of the cell was covered with blebs. After 6 hours of incubation, in the root planing only group, cells showed radially spreaded cytoplasm and were attached flat appearance. In 50, 100mg/ml of Tetracycline HCl treated groups, cellular margin was concaved and cytoplasm showed elongated appearance with polarity. After 24 hours of incubation, in the root planing group, cells showed characteristic polarity. In 50, 100mg/ml of Tetracycline HCl treated groups, cells showed more elongated and spindle - like appearance.

• Clinical and Experimental Pediatrics
• /
• v.48 no.8
• /
• pp.826-831
• /
• 2005

Purpose : This study is directed to evaluate standardized developmental test performances of infants and children who, as fetuses, had mild isolated cerebral ventriculomegaly diagnosed by ultrasound. Methods : All prenatal sonographic findings from 2001 to 2002 were evaluated. Live isolated mild ventriculomegaly(IMVM) of 10-15 mm were observed in 95 cases(1.1 percent). Standardized developmental testing of 40 cases of IMVM and 36 cases in a comparison group were offered to parents Both groups of children were adjusted to normal antepatum subjects with respect to sex, race, indication for ultrasound and gestational age at the time of ultrasound. Test of cognitive and motor development(Bayley Scales of Infant Development, Second Edition; BSID-II) were administered by developmental examiners. Results : Forty cases and 34 comparison sujects completed the testing. The IMVM and comparison groups were similar with respect to parental age, gestational age, birth weight, familial socioeconomic status. The IMVM subjects scored lower than the comparison group on both the BSID-II, but there was not statistically significant. differences; metal development index(MDI)($92.7{\pm}12.9$ vs $94.7{\pm}14.1$, P=0.47) and psychomotor development index(PDI)($100.3{\pm}14.1$ vs $101.3{\pm}10.7$, P=0.75). Eleven cases(27.5 percent) of IMVM group and five cases(14.7 percent) of the comparison group were developmentally delayed, but most cases in both groups showed mild delays. Resolution or lack of progression, lateral ventricle diameter ${\leq}12mm$ and females were associated with better scores, but there were not statistically significant. Polarity, and head circumference were not related to later development. Conclusion : This study show children with MIVM did not delay performance in the developmental test, but we might suggest a tendency to increase the risk of mild developmental delay.

• Journal of Life Science
• /
• v.17 no.9 s.89
• /
• pp.1298-1302
• /
• 2007

A hallmark of cancers is 'leaky' tight junctions (Tjs). TJs mediated paracellular permeability is elevated and TJs maintained cell polarity is frequently lost. Concomitantly, TJs-associated proteins including members of the claudin family of proteins are dysregulated. Recent findings indicate that these TJs changes can contribute to cancer progression. In this study, we examined the effects of ${\beta}-lapachone$, a quinone compound obtained from the bark of the lapacho tree (Tabebuia avellanedae), on the Tjs-associated regulators in human hepatocarcinoma cell lines, HepG2 and Hep3B. ${\beta}-lapachone$ treatment downregulated the levels of insulin-like growth factor 1 receptor (IGF-lR) proteins in both HepG2 and Hep3B cells. But the levels of claudin-3 and -4 proteins were increased in ${\beta}-lapachone$-treated HepG2 and Hep3B cells. And also the zonnula occludens-l (la-I) and p-catenin protein levels by ${\beta}-lapachone$ were increased in a time-dependent manner. However, claudin-3 and -4 mRNA levels were uninhibited by ${\beta}-lapachone$ in HepG2 and Hep3B. The present results suggest that the upregulation of claudin-3 and -4 protein levels by ${\beta}-lapachone$ occurs by a post-transcriptional mechanism and points to a novel mechanism by ${\beta}-lapachone$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.381-388
• /
• 2014

The antioxidant activities of extracts from Rubus coreanus Miquel (black raspberry) and Morus alba L. (mulberry) fruits were investigated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, 2,2-azino-bis-(3-ethylbenzo-thiazoline-6-sulfonic acid) (ABTS) assay, and reducing power assay. Aqueous mixtures of ethanol, methanol, and acetone were analyzed in order to determine the most effective extraction solvent for the two fruits. Black raspberry and mulberry extracts with the 60:40 acetone-water mixtures (v/v) showed the highest DPPH radical scavenging activities (56.2 and 85.2%, respectively) compared to the other extraction solvents. The 60% acetone extract was finally selected as an extraction solvent and then sequentially fractionated according to solvent polarity. Among the fractions of the two fruits, the ethyl acetate fraction showed the highest antioxidant activity as well as total phenolic and total flavonoid contents. In addition, there were high correlation coefficients between antioxidant activities and their contents. The $EC_{50}$ value of the ethyl acetate fraction from mulberry fruit was 2.2 times lower than that of butylated hydroxytoluene (BHT) in DPPH assay. The major phenolic acid and anthocyanin of the two fruits were protocatechuic acid and cyanidin-3-glucoside, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.3
• /
• pp.148-157
• /
• 2004

A rapid analytical method was developed to determine multiple pesticide residues in apples and pears using gas-liquid chromatography (GLC). The samples were extracted with water-miscible solvents and purified by cleanup procedures serially comprising liquid-liquid partition and solid-phase extraction (SPE). Each analyte was separated and determined by a high-resolution GLC equipped with electron-capture detector (ECD) and nitrogen-phosphorous detector (NPD). A total of 196 pesticides, which were previously classified into 5 groups each for ECD and NPD based on their retention behaviors on the capillary column and responses to the detector, were subjected to the recovery experiment. In compliance with the analytical criteria, 70 to 120% of recovery and less than 20% relative standard deviation the proposed method could be successfully applied to analyze 136 and 133 pesticide residues in apples and pears, respectively, which enabled not only rapid screening but quantitation of the residues. Even though less reliability was resulted from unacceptable recovery range, rest of pesticides including 43 and 45 analyzes in apples and pears, could be also detected for their identity. The proposed method fliled to cover 17 and 18 pesticides for apples and pears, which mostly showed high polarity or heat-lability but could be suitable far fast surveilance or monitoring of fruit harvests.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.40-40
• /
• 2010

Studies on attractive color changing property of dye chromophore and fluorophore have been greatly enjoyed in the related industrial and research fields such as optoelectronics, chemosensor, biosensor and so on. The optical property based on D-$\Pi$-A intramolecular charge transfer (ICT) system of chromophore molecules can be utilized as suitable sensing probes for checking media polarity and determining colorimetric chemosensing effect, especially heavy metal detection. These finding are obtained by absorption and emission properties. In this work, donor-acceptor D-$\Pi$-A type fluorescent dyes were designed and synthesized with the corresponding donor and acceptor groups. The selected donor moieties might be provided prominent amorphous properties which are very useful in designing and synthesizing functional polymers and in fabricating devices. Another reasons to choose are commercial availabilities in high purity and low price. Donor-bridge-acceptor (D-A) type dyes can produce impressive optical-physical properties, yielding them potentially suitable for applications in the synthesis of small functional organic molecules. Small organic functional molecules have unique advantages, such as better solubility, amorphous character, and represent an area of research which needs to be explored and developed. Currently, their applications in metalorganic compounds is rapidly expanding and becoming widespread in self-assembly processes, photoluminescence applications, chiral organocatalysts, and ingrafts with nanomaterials. Colloidal nanoparticles have received great attentions in recent years. The photophysical properties of nanoparticles, particularly in terms of brightness, photostability, emission color purity and broad adsorption range, are very attractive functions in many applications. To our knowledge background, colloidal nanoparticles have been enjoyed their applications in bio-probe research fields. This research interest can be raised by the advantages of the materials such as high photoluminescence quantum yields, sharp emission band, long-term photostability and broad excitation spectra. In recent, the uses of nanoparticles being embedded in a polymer matrix and binded on polymer surface have been explored and their properties such as photo-activation and strong photoluminescence have been proposed. The prepared chromophores and nanoparticles were investigated with absorption and emission properties, solvatochromic behaviors, pH induced color switching effects, chemosensing effects and HOMO/LUMO energy potentials with computer simulation. In addition, synthesized fluorophore dyes and particles were applied onto PE/Aramid fiber fluorescing colorations. And the related details were then discussed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.462-466
• /
• 2010

The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.335-342
• /
• 2017

Spiraea prunifolia Sieb. et Zucc. var. simpliciflora Nakai (SSN) has been used for the anti-inflammation in traditional folk medicine. To compare water and methanol extracts of SSN, we analyzed major components using LC IT TOF MS. The major components of hot water extract were identified as caffeic acid and p-coumaric acid, but methanol extract was not well established. However, methanol extract was detected with less polarity compounds compared to hot water extract. Next, we investigated the inhibitory effects of SSN water extract on the lipopolysaccharide (LPS)-induced inflammatory response or $H_2O_2-induced$ oxidative stress in Raw 264.7 macrophage cells. SSN strongly suppressed the production of nitric oxide in LPS-induced inflammatory response without cytotoxcity. The SSN possessed free radical scavenging activities such as DPPH ($IC_{50}=320.2{\mu}g/m{\ell}$), ABTS ($IC_{50}=124.0{\mu}g/m{\ell}$), and superoxide anion radical ($IC_{50}=122.6{\mu}g/m{\ell}$). The total phenol and flavonoid content of SSN was 56.7 mg/g, and 15.1 mg/g, respectively. Furthermore, SSN decreased the $H_2O_2-induced$ cytotoxicity by enhancing the cell viability, and SSN significantly reduced the intracellular reactive oxygen species (ROS) level. Therefore, SSN may be recommended as an effective strategy to prevent and/or treat various inflammation and ROS-induced diseases.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.1
• /
• pp.68-76
• /
• 2017

Antioxidative capacities of Stachys sieboldii MIQ and 6-year-old ginseng powder were assessed after extraction with 80% ethanol, and their addition effects on quality characteristics of cookies were determined. Stachys sieboldii MIQ showed 3.12-fold higher total phenol content (TPC) and higher antioxidative capacities than ginseng based on higher values of 2,2-diphenyl-1-picrylhydrazyl radical scavenging capacity, ferric reducing antioxidant capacity, and Trolox equivalent antioxidant capacity (P<0.05). The 80% ethanol extract was then fractionated with $H_2O$ (Fr. I), 30% (II), 50% (III), 70% (IV), and 100% ethanol (V). Fractions of Stachys sieboldii MIQ extract showed 2.2-fold (Fr. I)~6.1-fold (III) higher TPC and higher antioxidative capacities than ginseng extract fractions. TPC was in the order of fractions III> II> I> IV> V for Stachys sieboldii MIQ extract while in the order of fractions I~III> IV~V for ginseng extract, assuming that Stachys sieboldii MIQ contained more phenolic compounds with higher polarity than ginseng. Addition of 5% and 10% Stachys sieboldii MIQ and ginseng powder increased spread ratio in cookies compared to 100% wheat flour, and 10% addition of Stachys sieboldii MIQ resulted in the darkest and most reddish cookies. In the sensory evaluation, cookies with 5% and 10% Stachys sieboldii MIQ received higher scores for taste preference and higher overall acceptability than ginseng or control cookies. Therefore, powder of Stachys sieboldii MIQ could impart more favorable sensory characteristics as well as higher antioxidative capacity than ginseng in bakery products.