• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.911-913
• /
• 2008

In this work, nonvolatile memory (NVM) devices for system on panel of flat panel display (FPD) were fabricated using low temperature polycrystalline silicon (LTPS) thin film transistor (TFT) technology with an oxide-nitride-oxynitride (ONOn) stack structure on glass. The results demonstrate that the NVM devices fabricated using the ONOn stack structure on glass have suitable switching characteristics for data storage with a low operating voltage, a threshold voltage window of more than 1.8 V between the programming and erasing (P/E) states after 10 years and its initial threshold voltage window (${\Delta}V_{TH}$) after $10^5$ P/E cycles.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.596-603
• /
• 2000

The hardness and elastic modulus of three bulk materials are computed from the load and displacement data which are measured during basic nanoindentation test and compared with values determined by independent means to assess the accuracy of the method. The results show that with this technique, modulus and hardness and elastic modulus profile through depth of silicon nitride and silicon oxynitride films. The results show that for silicon nitride film deposited on silicon, hardness and elastic modulus increase as the volume ratio of NH3 : SiH4, which had been used for deposition, increases up to 20.0; and for silicon oxynitride film on silicon, the hardness and elastic modulus profile changes distinctly as the relative amount of oxygen in deposition gas mixture changes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.138-140
• /
• 2006

A new diagnosis model was constructed by combining atomic force microscopy (AFM), wavelet, and neural network. Plasma faults were characterized by filtering AFM-measured etch surface roughness with wavelet. The presented technique was evaluated with the data collected during the etching of silicon oxynitride thin film. A total of 17 etch experiments were conducted. Applying wavelet to AFM, surface roughness was detailed into vertical, horizon%at, and diagonal components. For each component, neural network recognition models were constructed and evaluated. Comparisons revealed that the vertical component-based model yielded about 30% improvement in the recognition accuracy over others. The presented technique was evaluated with the data collected during the etching of silicon oxynitride thin film. A total of 17 etch experiments were conducted

• Journal of Information Display
• /
• 제13권3호
• /
• pp.107-111
• /
• 2012

An almost pure phase of $Ba_3Si_6O_{12}N_2$ doped with $Eu^{2+}$ was successfully synthesized through the ammonia nitridation of an oxide precursor prepared through an aqueous-solution method, using propylene- glycol-modified silane. The emission peak intensity of the obtained $Ba_3Si_6O_{12}N_2:Eu^{2+}$ was -2.2 times higher than that of the sample prepared through a solid-state reaction method.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.116-121
• /
• 2002

For the accumulation of a fundamental knowledge about the behavior of glass solder during the joining of ceramics, the wettability of solder on silicon nitride have been measured by sessile drop method. $SiO_2-MgO-Al_2O_3$ g1ass solder and oxynitride glass solders were selected as examples while silicon nitride which were used as substrates. Contact angle of solder on silicon nitride didn't decrease with time at high nitrogen content in the solder, but low nitrogen content in solders have the time-dependent property. Reason which contact angle of low nitrogen content in solders decrease on silicon nitride was that diffusion of nitrogen take place between solder and silicon nitride.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.1-4
• /
• 1998

SiC whisker reinforced Al2O3-SiC composite was fabricated by reaction synthesis method whish is cost ef-fective and allows good dispersion of whiskers. Fracture strength at room temperature showed the highest value with 150$0^{\circ}C$ reaction temperature because a lot of SiC whiskers was formed. Fracture strength at 135$0^{\circ}C$ did not show big differences with reaction temperature due to agglomeration of whiskers and formation of sil-icon oxynitride during hot MO(modulus of rupture) test probably promoting grain boundary sliding.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1058-1061
• /
• 2003

Gallium Nitride (GaN) powders were synthesized by calcining a gallium(III) sulfate salt in flowing ammonia in the temperature range 500-1100$^{\circ}C$. The process of conversion of the salt to GaN was monitored by X-Ray Diffraction (XRD). The salt decomposed to ${\gamma}$-Ga$_2$O$_3$ and then converted to GaN without ${\gamma}$-${\beta}$Ga$_2$O$_3$ phase transition. Variations in XRD patterns and weight loss of samples with temperature indicate that the conversion of ${\gamma}$-Ga$_2$O$_3$ to GaN does not proceed through Ga$_2$O but stepwise via amorphous gallium oxynitride (GaO$\_$x/N$\_$y/) as intermediates. Room-temperature photoluminescence spectra of GaN powders obtained showed the emission peak at 363 nm and no yellow band.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.586-591
• /
• 2004

We studied the dependence of hot-tarrier-induced degradation characteristics on nitrogen concentration in NO(Nitrided-Oxide) gate of nMOS, under ac and dc stresses. The $\Delta$V$_{t}$ and $\Delta$G$_{m}$ dependence of nitrogen concentration were observed, We observed that device degradation was suppressed significantly when the nitrogen concentration in the gate was increased. Compared to $N_2$O oxynitride, NO oxynitride gate devices show a smaller sensitivity to ac stress frequency. Results suggest that the improved at-hot carrier immunity of the device with NO gate may be due to the significantly suppressed interface state generation and neutral trap generation during stress.ess.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.161-162
• /
• 2006

Scaling rules for TFT application devices have led to the necessity of ultra thin dielectric films and high-k dielectric layers. In this paper, The advantages of high concentration of nitrogen in silicon oxide layer deposited by using $N_2O$ in Inductively Coupled Plasma Chemical Vapor Deposition (ICP-CVD) reported about Ellipsometric measurement, Capacitance-Voltage characterization and processing conditions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.384-384
• /
• 2010

Zirconium oxynitride films were obtained by r.f. reactive magnetron sputtering of a zirconium target with nitrogen flow rate ranging from 0 to 60 sccm. The phases present in the films were determined by X-ray diffraction (XRD). Measurements of the oxidation state $ZrON_x$ films were investigated by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). Thickness of these samples was estimated by spectroscopic ellipsometry (SE) and scanning electron microscopy (SEM). We found that the surface morphology of $ZrON_x$ films measured by atomic force microscopy (AFM) was also depended on the nitrogen gas flow.