• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.103.2-103
• /
• 1998

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.356-358
• /
• 2010

Cuprous oxide ($Cu_2O$)를 기초로 하여 산화 박막 트랜지스터에 대하여 연구를 하였다. 일정한 두께의 cuprous oxide ($Cu_2O$) 박막을 조건별로 열처리 공정을 하고 그에 따른 변화를 측정을 하였다. 그 측정한 결과 중 가장 좋은 열처리 조건으로 열 증착 방식(Vacuum Thermal Evaporation)을 사용하여 cuprous oxide ($Cu_2O$) 비정질 산화 박막 트랜지스터를 제작 및 측정했다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권2호
• /
• pp.55-58
• /
• 2003

This paper examines the electrical characteristic of single oxide layer due to various diffusion conditions, substrate orientations, substrate resistivity and gas atmosphere in a diffusion furnace. The oxide quality was examined through the capacitance-voltage characteristic due to the annealing time after oxidation process, and the capacitance-voltage characteristics of the single oxide layer by will be described via semiconductor device simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.41-44
• /
• 2000

Ultra large scale integrated circuit(ULSI) & complementary metal oxide semiconductor(CMOS) circuits require gate electrode materials such as meta] silicides, titanium-silicide for gate oxides. Many previous authors have researched the improvements sub-micron gate oxide quality. However, little has been done on the electrical quality and reliability of ultra thin gates. In this research, we recommend novel shallow trench isolation structure and two step TiSi$_{2}$ formation for sub 0.1${\mu}{\textrm}{m}$ gate oxide.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1519-1523
• /
• 2002

A procedure for preparing semiconductor/metal nanowire arrays is described, based on a template method which entails electrochemical deposition into nanometer-wide parallel pores of anodic aluminum oxide films on aluminum. Aligned CdS/Co heterostructured nanowires have been prepared by ac electrodeposition in the anodic aluminum oxide templates. By varying the preparation conditions, a variety of CdS/Co nanowire arrays were fabricated, whose dimensional properties could be adjusted.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.875-877
• /
• 2007

Zinc tin oxide (ZTO) sol-gel solution was synthesized for ink-jet printable semiconducting ink. Bottom-contact type TFT was produced by printing the ZTO layer between the source and drain electrodes. The transistor involving the ink-jet printed ZTO had the $mobility\;{\sim}\;0.01\;cm^2V^{-1}s^{-1}$. We demonstrated the direct-writing of semiconducting oxide for solution processed TFT fabrication.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.25-29
• /
• 1997

Capacitor-type MONOS (metal-oxide-nitride-oxide- semiconductor) NVSMs with 23$\AA$ tunneling oxide and 40$\AA$ blocking oxide were fabricated. The thicknesses of nitride layer were 45$\AA$, 91$\AA$ and 223$\AA$, Breakdown characteristics of MONOS devices were measured to investigate the reliability of superthin ONO structure using ramp voltage and constant voltage method. Reducing the nitride thickness will significantly increase the reliablity of MONOS NVSM.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.362-364
• /
• 2016

본 논문에서는 MOS(Metal Oxide Semiconductor) Capacitor의 산화막내에 다양한 원인에 의해 존재하는 비이상적인 전하들 중 Fixed Oxide Charge가 소자의 문턱전압에 어떤 영향을 주는지 분석했다. 분석한 결과 n+ polysilicon Gate를 가지고, 산화막인 $SiO_2$의 두께가 3nm이고, 도핑농도가 $10^{18}cm^{-2}$인 P형 실리콘 기판으로 이루어진 MOS Capacitor에서 Fixed Oxide Charge Density가 $C/cm^2$ 이상일 때 문턱전압을 0.01V 이상 감소시키고 $C/cm^2$ 이하일 때 문턱전압을 0.01V 이상 증가시켰다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.86.1-86.1
• /
• 2015

As the feature size of Si-based semiconductor shrinks to nanometer scale, we are facing to the problems such as short channel effect and leakage current. One of the solutions to cope with those issues is to bring III-V compound semiconductors to the semiconductor structures, because III-V compound semiconductors have much higher carrier mobility than Si. However, introduction of III-V semiconductors to the current Si-based manufacturing process requires great challenge in the development of process integration, since they exhibit totally different physical and chemical properties from Si. For example, epitaxial growth, surface preparation and wet etching of III-V semiconductors have to be optimized for production. In addition, oxidation mechanisms of III-V semiconductors should be elucidated and re-growth of native oxide should be controlled. In this study, surface preparation methods of various III-V compound semiconductors such as GaAs, InAs, and GaSb are introduced in terms of i) how their surfaces are modified after different chemical treatments, ii) how they will be re-oxidized after chemical treatments, and iii) is there any effect of surface orientation on the surface preparation and re-growth of oxide. Surface termination and behaviors on those semiconductors were observed by MIR-FTIR, XPS, ellipsometer, and contact angle measurements. In addition, photoresist stripping process on III-V semiconductor is also studied, because there is a chance that a conventional photoresist stripping process can attack III-V semiconductor surfaces. Based on the Hansen theory various organic solvents such as 1-methyl-2-pyrrolydone, dimethyl sulfoxide, benzyl alcohol, and propylene carbonate, were selected to remove photoresists with and without ion implantation. Although SPM and DIO3 caused etching and/or surface roughening of III-V semiconductor surface, organic solvents could remove I-line photoresist without attack of III-V semiconductor surface. The behavior of photoresist removal depends on the solvent temperature and ion implantation dose.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.6-11
• /
• 2008

In this study, we investigated effects of hydrogen annealing (HA) and plasma nitridation (PN) applied in order to improve $Si/SiO_2$ interface characteristics of TiN metal gate. In result, HA and PN showed a positive effect decreasing number of interface state $(N_{it})$ respectively. After FN stress for verifying reliability, however, we identified rapid increase of $N_{it}$ for TiN gate with HA, which is attributed to hydrogen related to a change of $Si/SiO_2$ interface characteristic. In contrast to HA, PN showed an improved Nit and gate oxide leakage characteristic due to several possible effects, such as blocking of Chlorine (Cl) diffusion and prevention of thermal reaction between TiN and $SiO_2$.