• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.886-892
• /
• 2007

This paper presents examples of trolley wire resistance influential on the movement of tensioning devices. Therefore, this study is on the examples of trolley wire resistance which keep tensioning devices from working properly to the expansion and contraction in accordance with temperature change of overhead trolley wire system such as messenger wire and contact wire. Trolley wire resistance interrupts the working of tensioning device and drops the capacity of trolley wire. Reduced trolley wire capacity lowers the performance of current collection and has a bad effect on electrical train operation. So it is desirable to reduce the factors increasing trolley wire resistance to the minimum from the designing and construction stage of overhead trolley wire system. This study will introduce this problem and suggest the solution.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.128-135
• /
• 2005

Overhead crane systems consist of trolley, girder, rope, objects, trolley motor, girder motor, and hoist motor. The dynamic system of these systems becomes a nonlinear state equations. These equations are obtained by the nonlinear equations of motion which are derived from transfer functions of driving motors and equations of motion for objects. From these state equations, Lyapunov functions of overhead crane systems are derived from integral method. These functions secure stability of autonomous overhead crane systems. Also constraint equations of driving motors of trolley, girder, and hoist are derived from these functions. From the results of computer simulation, it is founded that overhead crane systems is secure.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.166-171
• /
• 1999

An overhead crane system consists of trolley, girder, rope, object, trolley motor, girder motor, and hoist motor. An analytic model which derived from the modelling of the overhead crane system is nonlinear model which includes the swing and the twist angle of the object. this model consists of the equation of motion for motors and object. If the swing angle and the acceleration of Z for the object are small, this model becomes a simple nonlinear model which doesn't include the swing and the twist angle of the object. From the results of computer simulation, the characteristics of an actual overhead crane system could be predicted by the simple nonlinear model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2240-2245
• /
• 2003

In this paper, the controller design by coefficient diagram method (CDM) for controlling the trolley position, load-swing angle and hoisting rope length of the overhead crane system simultaneously is proposed. The overhead crane system is a MIMO system consisting of two inputs and three outputs. Its mathematical model is nonlinear with coupling characteristics. This nonlinear model can be approximated to obtain a linear model where the first input mainly affects the trolley position and the load-swing angle while the second input mainly affects the hoisting rope length. In order to utilize the CDM concept for assigning the controllers, namely PID, PD and PI controllers separately, the model is approximated to be three transfer functions in accordance with trolley position, the load-swing angle and the hoisting rope length controls respectively. The satisfied performances of the overhead crane system controlled by the these controllers and fast rejection of the disturbance effect occurred at the trolley position are shown by simulation and experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.297-304
• /
• 1997

This paper presents a systematic design method of an anti-swing control law for overhead cranes. A velocity servo system for the trolley of a crane is designed based on the dynamics of the trolley and its load. The velocity servo system compensates for the effects of load swing on the trolley dynamics so that the velocity servo is independent of load swing. The velocity servo system is used for the design of a position servo system for the trolley via the loop shaping method. The position servo system and the swing dynamics of the load are then used to design an angle control system for load swing based on the root locus method. The combined position servo and the angle control systems constitute the overall control system. In the presence of low frequency disturbances, the proposed control law guarantees accurate position control for the trolley and fast damping for load swing. Furthermore, the performance of the proposed control law is independent of the mass of the load. Experimental results on a prototype crane show the effectiveness of the proposed anti-swing control law.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1919-1925
• /
• 2001

Overhead cranes consist of trolley, girder, rope, objects, trolley motor, girder motor, and hoist motor. If objects are regarded as mass point, and the acceleration of hoisting motion for objects is neglected, analytical model of overhead cranes becomes a nonlinear model because the length of a rope changes. Equations of motion this model is derived of simultaneous differential equations fur motors and object. Positions of the model are controlled by optimal inputs which obtain from a nonlinear optimal control method. From the results of computer simulation, even if initial states of objects suing, it is founded that position of overhead cranes is controlled, and that swing of objects is suppressed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.6
• /
• pp.975-980
• /
• 2017

Overhead catenary system of electric railway has overlap sections which devide and tighten trolley wire supplying electric power to train, where current collection performances may become worse according to railway speed-up. Current collection tests conducted at 400 km/h test-bed section of Honam high-speed railway show that balanced line arrangement at overlap section is needed to secure current collection without arc generation between trolley wire and train current collection device. This paper proposes a design procedure of the overlap section to allow for tension increase and uplift of the trolley wires according to railway speed-up. By applying the proposed procedure to the overhead catenary system of Honam high-speed railway, it is suggested that the minimum span length should be 33.2 m for railway speed-up to 350 km/h and 43.7 m for speed-up to 400 km/h.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1468-1474
• /
• 2001

In this paper, a new fuzzy-logic anti-swing control scheme is proposed for a three-dimensional overhead crane. The proposed control consists of a position servo control and a fuzzy-logic control. The position servo control is used to control the trolley position and rope length, and the fuzzy-logic control is used to suppress load swing. The proposed control guarantees not only prompt suppression of load swing but also accurate control of trolley position and rope length for the simultaneous travel, traverse, and hoisting motions of the crane. The effectiveness of the proposed control is shown by experiments with a prototype three-dimensional overhead crane.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1391-1401
• /
• 1995

This paper addresses design procedure and testing results of a closed-loop motion control of the cranes. When the object is stopped at the desired position, swinging occurs, and such swinging deteriorates the safety and efficiency of the operation of the crane. Therefore, in this paper, the cascade anti-swing and trolley position feedback controller are designed. Anti-swing controller rapidly eliminates swinging of object and position feedback controller reduces the trolley position error. The performance of this controller is investigated through the computer simulation and experiment. From the results of a series of computer simulations and experiments it can be concluded that proposed controller effectively reduces swinging of the object and trolley position error, which shows this controller can be used as an effective tool for the precise control of overhead cranes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.395-398
• /
• 1996

In this study, when the nonlinear overhead crane which allows simultaneously travel and traverse motion moves a desired transport route, the object suspended the end of rope does undesirable swing motion. Nonlinear overhead crane pertubes in the vicinity of an operating point, therefore the nonlinear overhead crane is modified to linear overhead crane for the operating point. The linear overhead crane was controlled to swing angles of the object by the ratio of torque inputs to motors of the girder and the trolley. As a basis for the result of the linear overhead crane, the nonlinear overhead crane was controlled swing angles of the object and positions of the overhead crane without collision with environmental equipment by partial state feedback control.