• 제목/요약/키워드: Overdentures

검색결과 80건 처리시간 0.027초

완전 무치악 환자에서 하악 임플란트 지지 피개의치 사용 후의 환자만족도에 관한 전향적 연구 (A prospective study of patient satisfaction after implant supported mandibular overdenture treatment in fully edentulous patients)

  • 홍주희;정겨운;신상완;방은경
    • 대한치과보철학회지
    • /
    • 제53권1호
    • /
    • pp.1-8
    • /
    • 2015
  • 목적: 이 연구의 목적은 하악 임플란트 지지 피개의치와 전통적인 총의치의 환자 만족도를 비교하기 위함이다. 재료 및 방법: 하악 임플란트 지지 피개의치 치료가 계획된 40명의 상하악 완전 무치악 환자(51세 - 82세)를 대상으로 하였고, 모든 환자는 저작기능, 발음, 심미, 통증, 전반적인 만족도를 기존의 총의치 장착 시와 임플란트 지지 피개의치 장착 1주 후, 12주 후에 visual analog scale법을 이용하여 답하였다. 각 시기의 만족도 비교를 위해 반복측정 분산분석(repeated-measures ANOVA)을 시행하였다(P<.05). 결과: 모든 설문 항목에서 임플란트 지지 피개의치 장착 1주 후, 12주 후에 총의치를 장착했을 때보다 높은 만족도를 보였다(P<.05). 임플란트 지지 피개의치 장착 12주 후에 저작기능, 발음, 통증, 전반적인 만족도는 장착 1주 후에 비해 증가된 결과를 보였고, 심미에 대한 만족도와 전체적인 만족도는 감소함을 나타냈으나, 통계적인 유의성을 보이지는 않았다. 결론: 임플란트 지지 피개의치는 기존의 총의치에 만족하지 못하는 환자들의 만족도를 높임으로써 환자의 삶의 질을 개선시킬 수 있는 효과적인 치료 방법 중 하나가 될 수 있으리라 생각된다.

Finite element analysis on stress distribution of maxillary implant-retained overdentures depending on the Bar attachment design and palatal coverage

  • Kim, Min-Jeong;Hong, Sung-Ok
    • The Journal of Advanced Prosthodontics
    • /
    • 제8권2호
    • /
    • pp.85-93
    • /
    • 2016
  • PURPOSE. The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-retained overdenture. MATERIALS AND METHODS. Maxillary implant-retained overdentures with 4 implants placed in the anterior region of edentulous maxilla were converted into a 3-D numerical model, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional finite element analysis. RESULTS. In all experimental models, the highest stress was concentrated on the most distal implant and implant supporting bone on loaded side. The stress at the most distal implant-supporting bone was concentrated on the cortical bone. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant and implant supporting bone on loaded side. CONCLUSION. It could be suggested that when making maxillary implant retained overdenture, using Hader bar instead of milled bar and full palatal coverage rather than partial palatal coverage are more beneficial in distributing the stress that is applied on implant supporting bone.

Clinical outcome of double crown-retained implant overdentures with zirconia primary crowns

  • Rinke, Sven;Buergers, Ralf;Ziebolz, Dirk;Roediger, Matthias
    • The Journal of Advanced Prosthodontics
    • /
    • 제7권4호
    • /
    • pp.329-337
    • /
    • 2015
  • PURPOSE. This retrospective study aims at the evaluation of implant-supported overdentures (IODs) supported by ceramo-galvanic double crowns (CGDCs: zirconia primary crowns + galvano-formed secondary crown). MATERIALS AND METHODS. In a private practice, 14 patients were restored with 18 IODs (mandible: 11, maxilla: 7) retained by CGDCs on 4 - 8 implants and annually evaluated for technical and/or biological failures/complications. RESULTS. One of the 86 inserted implants failed during the healing period (cumulative survival rate (CSR) implants: 98.8%). During the prosthetic functional period (mean: $5.9{\pm}2.2years$), 1 implant demonstrated an abutment fracture (CSR-abutments: 98.2%), and one case of peri-implantitis was detected. All IODs remained in function (CSR-denture: 100%). A total of 15 technical complications required interventions to maintain function (technical complication rate: 0.178 treatments/patients/year). CONCLUSION. Considering the small sample size, the use of CGDCs for the attachment of IODs is possible without an increased risk of technical complications. However, for a final evaluation, results from a larger cohort are required.

Survival rate and clinical evaluation of the implants in implant assisted removable partial dentures: surveyed crown and overdenture

  • Kang, Soo-Hyun;Kim, Seong-Kyun;Heo, Seong-Joo;Koak, Jai-Young
    • The Journal of Advanced Prosthodontics
    • /
    • 제12권4호
    • /
    • pp.239-249
    • /
    • 2020
  • PURPOSE. The purpose of this study was to investigate survival rates of the implants used in implant assisted removable partial dentures (IARPDs). MATERIALS AND METHODS. The study was conducted on 21 patients who were treated with IARPDs. The mean follow-up period for IARPD patients ranged from 12 to 185 months (mean 47.9 months). A total of 58 implants were used for IARPDs in two different modalities: 41 for surveyed crowns and 17 for overdentures. The survival of implants was determined by clinical and radiographic evaluations considering relevant factors: location, RPD classification, opposing dentition, splinting, and implant diameter. RESULTS. The survival rate of total 58 implants was 93.1%: 95.1% for implants supporting surveyed crowns and 88.2% for implants used in overdentures. Considering only the implants supporting surveyed crown, regular diameter implants showed a higher survival rate than narrow or wide diameter implants. CONCLUSION. The survival rate of the implants used in IARPDs was 93.1% (surveyed crown: 95.1%, overdenture: 88.2%).

하악 임플란트 오버덴쳐에서 어태치먼트 종류에 따른 응력분포 (The Influence of Attachment Type on the Distribution of Occlusal Force in Implant Supported Overdentures)

  • 성채련;조인호
    • 구강회복응용과학지
    • /
    • 제25권4호
    • /
    • pp.375-390
    • /
    • 2009
  • 하악 완전 무치악 환자에서 이공 사이에 2개의 임플란트를 식립한 후 4종류의 어태치먼트를 사용한 하악 오버덴쳐를 제작하여 유한요소 모델을 만들고 여기에 3가지 하중 조건을 가하여 유한요소 해석 프로그램인 ANSYS 10.0을 이용하여 어태치먼트 종류에 따른 임플란트 주위골과 보철물 및 임플란트와 골 사이 계면에 발생하는 최대 응력의 크기와 응력 분포양상을 분석하였다. 하악골체의 전체적인 골격구조에서 치아 부분은 오버덴쳐로 모델을 형성하였고 오버덴쳐와 하악골 사이에 2mm 두께의 점막을 삽입하였다. 임플란트 오버덴쳐의 유한요소 모델은 ball and socket, Locator, magnet, bar의 각각 4가지 형태를 제작하였다. 고정체의 식립 위치는 양측 이공 전방이고, 경계 조건 중 고정점은 하악각 부위와 모형의 최후방 절점들을 고정점으로 설정하였다. 하중조건은 오버덴쳐의 좌측 제 2소구치에서 제 2대구치 편측 부위에 170N의 하중을, 좌 우측 제 2소구치에서 제 2대구치 양측 부위에 170N의 하중을, $90^{\circ}$수직 방향, $45^{\circ}$경사, 그리고 $0^{\circ}$ 수평 방향으로 가하였다. 결과 분석시 모든 하중방향에서 응력의 크기는 bar에서 임플란트나 오버덴쳐에서 가장 크게 나타났으며, 계면에서의 응력은 모든 어태치먼트에서 비슷한 응력분포가 나타났다. Ball and socket, Locator, magnet에서는 유의성을 보이지 않았다. 응력의 분포도에서는 4종류의 어태치먼트 모두 임플란트 치경부에서 응력이 집중된 양상을 보였으며 bar타입에서는 bar의 중앙에 응력이 크게나타났다. 이상의 결과로 볼 때 어태치먼트의 종류에 따라 응력분포의 차이가 있었음을 확인할 수 있었다. 어태치먼트의 선정 시 응력집중을 완화시킬 수 있는 바람직한 설계와 선택이 필요하리라 사료된다.

두 종류의 임플란트 시스템을 이용한 하악의 미니-임플란트지지 피개의치 수복 증례 (Mandibular implant supported overdentures with two different mini-implant systems: A case report)

  • 박진홍;이정열;류재준;신상완
    • 대한치과보철학회지
    • /
    • 제54권3호
    • /
    • pp.267-272
    • /
    • 2016
  • 본 증례는 치조골의 흡수가 심한 두 명의 완전무치악 환자에서 서로 다른 임플란트 시스템을 이용한 하악의 미니-임플란트 지지 피개의치에 대한 증례보고이다. 두 환자는 하악 의치의 유지력 부족으로 인한 의치 사용시 불편감 및 동통을 주소로 호소하였다. 각각의 환자는 4개의 미니 임플란트를 이공사이에 판막의 거상없이 식립하였다. 첫번째 증례는 미니볼 어태치먼트와 일체형으로 된 미니-임플란트(Slimline, Dentium, Seoul, Korea)를 식립하고 구강내 직접법으로 어태치먼트를 연결하여 즉시하중을 시행하였다. 두번째 증례는 분리형으로 로케이터 어태치먼트와 연결되는 미니-임플란트(LODI, Zest Anchors, Escondido, CA, USA)를 이용하였으며, 임플란트 식립 8주 후 간접법으로 어태치먼트를 연결하였다. 최종 의치 장착 후 6개월 정기검진까지 미니볼과 로케이터 어태치먼트를 이용한 하악의 미니-임플란트 지지 피개의치 증례에서 환자의 전반적인 만족도가 개선되었으며 주목할 만한 합병증 없이 만족할 만한 임상적 결과를 얻었다. 단 추후 지속적인 유지관리 및 장기적인 평가가 더 필요하리라 사료된다.

유전성 외배엽 이형성증 환자 수복에 관한 계속적 연구 (LONGITUDINAL PROSTHODONTIC STUDY OF HEREDITARY ECTODERMAL DYSPLASIA - 6 YEAR STUDY -)

  • 이진걸;양재호
    • 대한치과보철학회지
    • /
    • 제29권1호
    • /
    • pp.249-254
    • /
    • 1991
  • Two male patients of hereditary ectodermal dysplasia with oligodontia aged 12years and 10years 6months were recalled after 6 years and treated by reconstructing overdentures according to the growth. Patients were improved functionally and cosmetically. Periodic recall is reguired and denture should be reconstructed according ato their growth.

  • PDF

Open and Closed Mouth Impression Techniques for Mandibular Implant Overdenture: Two Cases Report

  • Ha-Jin, Yoon;Jung-Yoon, Bae
    • Journal of Korean Dental Science
    • /
    • 제15권2호
    • /
    • pp.152-161
    • /
    • 2022
  • Mandibular implant overdenture is a good treatment option for complete edentulous patients with restoring removable prosthesis. Mandibular implant overdenture with two implants and locator attachments is widely used. It is tissue-supported overdenture that is made with the concept of conventional complete denture fabrication. There are two patients who provided impressions by open mouth technique and closed mouth technique in each case. In both cases, mandibular implant overdentures were restored with functionally and aesthetically satisfying results.

Stress analysis of mandibular implant overdenture with locator and bar/clip attachment: Comparative study with differences in the denture base length

  • Yoo, Jin Suk;Kwon, Kung-Rock;Noh, Kwantae;Lee, Hyeonjong;Paek, Janghyun
    • The Journal of Advanced Prosthodontics
    • /
    • 제9권3호
    • /
    • pp.143-151
    • /
    • 2017
  • PURPOSE. The design of the attachment must provide an optimum stress distribution around the implant. In this study, for implant overdentures with a bar/clip attachment or a locator attachment, the stress transmitted to the implant in accordance with the change in the denture base length and the vertical pressure was measured and analyzed. MATERIALS AND METHODS. Test model was created with epoxy resin. The strain gauges made a tight contact with implant surfaces. A universal testing machine was used to exert a vertical pressure on the mandibular implant overdenture and the strain rate of the implants was measured. RESULTS. Means and standard deviations of the maximum micro-deformation rates were determined. 1) Locator attachment: The implants on the working side generally showed higher strain than those on the non-working side. Tensile force was observed on the mesial surface of the implant on the working side, and the compressive force was applied to the buccal surface and on the surfaces of the implant on the non-working side. 2) Bar/clip attachment: The implants on the both non-working and working sides showed high strain; all surfaces except the mesial surface of the implant on the non-working side showed a compressive force. CONCLUSION. To minimize the strain on implants in mandibular implant overdentures, the attachment of the implant should be carefully selected and the denture base should be extended as much as possible.