• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.517-524
• /
• 2015

The fast and accurate spectrum sensing over an ultra-wide bandwidth is a big challenge for the radio environment cognition. Considering sparse signal feature, two novel compressed sensing schemes are proposed, which can reduce compressed sampling rate in contrast to the traditional scheme. One algorithm is dynamically adjusting compression ratio based on modulation recognition and identification of symbol rate, which can reduce compression ratio. Furthermore, without priori information of the modulation and symbol rate, another improved algorithm is proposed with the application potential in practice, which does not need to reconstruct the signals. The improved algorithm is divided into two stages, which are the approaching stage and the monitoring stage. The overall sampling rate can be dramatically reduced without the performance deterioration of the spectrum detection compared to the conventional static compressed sampling rate algorithm. Numerous results show that the proposed compressed sensing technique can reduce sampling rate by 35%, with an acceptable detection probability over 0.9.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2001.04a
• /
• pp.153-165
• /
• 2001

In this paper we point out another advantage of systematic sampling over simple random sampling, which have not yet been spelled out in the literature. After a single sample is drawn by a sampling scheme, it is important to check whether the achieved sample represents the pupulation well or out. Therefore, a sampling scheme which avoids the possibility of selecting non-preferred samples is desirable. The simulation results are given to illustrate that, in the ordered population, the possibility of selecting non-preferred sample by systematic sampling is lower than that by simple random sampling.

• Survey Research
• /
• v.2 no.2
• /
• pp.153-165
• /
• 2001

In this paper we point out another advantage of systematic sampling over simple random sampling, which have not yet been spelled out in the literature. After a single sample is drawn by a sampling scheme, it is important to check whether the achived sample represents the population well or not. Therefore. a sampling scheme which avoids the possibility of selecting non-preferred samples is desirable. The simulation results are given to illustrate that, in the ordered population, the possibility of selecting non-preferred sample by systematic sampling is lower than that by simple random sampling.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.6 no.9
• /
• pp.1-5
• /
• 1983

This study takes over the application of survey sampling theory to activity sampling and the application of activity sampling to time standard estimation. Cluster, stratified, and multistage sampling are studied in conjunction with random and systematic sampling. Estimation procedures that will maximize the information obtained per cost expended on the study and specification of the procedure to be used to estimate the accuracy of the estimates for the adopted procedure are considered. The use of multiple regression md linear programming to estimate standard element performance time from typical job lot production data is also considered.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.23-31
• /
• 2008

The purpose of this study was to investigate proper sampling duration while executing quiet stance of feet together position and a preferred foot position with eyes open using COP variables through GRF system. The subjects participated in this study were twenty healthy elderly women individuals($68.9{\pm}6.8$ years). It represented that the sampling duration needed over 20 s in the FTP and over 60 s in the PFP during assessment of quiet stance. The sampling duration shorter than 20 s in the FTP and 60 s in the PFP may not provide the sample showing stability. Inversely if the sampling duration becomes longer, it can distort the sample showing stability. In the future, I expect more studies of the proper sampling duration through various groups and the study of characteristics of participants caused by more sampling duration.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2000.11a
• /
• pp.157-168
• /
• 2000

In this paper we point out another advantage of systematic sampling over simple random sampling, which have not yet been spelled out in the literature. After a single sample is drawn by a sampling scheme, it is important to check whether the achived sample represents the population well or not. Therefore, a sampling scheme which avoids the possibility of selecting non-preferred samples is desirable. The simulation results are given to illustrate that, in the ordered population, the possibility of selecting non-preferred sample by systematic sampling is lower than that by simple random sampling.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.123-130
• /
• 1999

In discrete-time controlled system, sampling time is one of the critical parameters for control performance. It is useful to employ different sampling rates into the system considering the feasibility of measuring system or actuating system. The systems with the different sampling rates in their input and output channels are named multirate system. Even though the original continuous-time system is time-invariant, it is realized as time-varying state equation depending on multirate sampling mechanism. By means of the augmentation of the inputs and the outputs over one period, the time-varying system equation can be constructed into the time-invariant equation. The two multirate formulations have some trade-offs in the simplicity to construct the controller, the control performance. It is good issue to determine the suitable formulation in consideration of performance of them. In this paper, the two categories of multirate formulations will be compared in terms of the linear quadratic (LQ) cost function. The results are used to select the multirate formulation and the sampling rates suitable to the desired control performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.2
• /
• pp.131-138
• /
• 1999

In discrete-time controlled system, sampling time is one of the critical parameters for control performance. It is useful to employ different sampling rates into the system considering the feasibility of measuring system or actuating system. The systems with the different sampling rates in their input and output channels are named multirate system. Even though the original continuous-time system is time-invariant, it is realized as time-varying state equation depending on multirate sampling mechanism. By means of the augmentation of the inputs and the outputs over one Period, the time-varying system equation can be constructed into the time-invariant equation. In this paper, an alternative time-invariant model is proposed, the design method and the stability of the LQG (Linear Quadratic Gaussian) control scheme for the realization are presented. The realization is flexible to construct to the sampling rate variations, the closed-loop system is shown to be asymptotically stable even in the inter-sampling intervals and it has smaller computation in on-line control loop than the previous time-invariant realizations.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.71-78
• /
• 2019

This study aims to identify good borrowers within the context of P2P lending. P2P lending is a growing platform that allows individuals to lend and borrow money from each other. Inherent in any loans is credit risk of borrowers and needs to be considered before any lending. Specifically in the context of P2P lending, traditional models fall short and thus this study aimed to rectify this as well as explore the problem of class imbalances seen within credit risk data sets. This study implemented an over-sampling technique known as Synthetic Minority Over-sampling Technique (SMOTE). To test our approach, we implemented five benchmarking classifiers such as support vector machines, logistic regression, k-nearest neighbor, random forest, and deep neural network. The data sample used was retrieved from the publicly available LendingClub dataset. The proposed SMOTE revealed significantly improved results in comparison with the benchmarking classifiers. These results should help actors engaged within P2P lending to make better informed decisions when selecting potential borrowers eliminating the higher risks present in P2P lending.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.106-114
• /
• 2013

This paper deals with the effect of the internal sampling frequency and core band down sampling ratio on the overall performance of the MPEG USAC. Here, the internal sampling frequency is the sampling frequency of a signal actually coded. The core band down sampling ratio is the ratio of the width of the core band over that of the coded band. The performance was measured on 6 different test sound sources by the MUSHRA test with 10 subjects. The experiments showed that 1/3 or 1/4 core band down sampling ratio could yield the better performance than the conventional 1/2 ratio, especially at low rates.