• 동력기계공학회지
• /
• 제13권6호
• /
• pp.110-116
• /
• 2009

In the present study, we proposed a simulation model of vacuum booster with AMESIM software to predict the output characteristic. And we performed the sensitivity analysis of output characteristic with main design parameters, such as diaphragm diameter. All of these parameters are main design parameters in the procedure of vacuum booster design. The simulation results of this paper offer qualitative information of vacuum booster output. Therefore, the simulation results of this paper will be used effectively for the design procedure of vacuum booster in the industrial field.

• 산업기술연구
• /
• 제28권B호
• /
• pp.167-174
• /
• 2008

In this paper, the analysis on type effect of inverter output voltage distortion on the control of an induction motor is discussed. The inverter output voltage is distorted differently from the reference voltage owing to the inverter nonlinear characteristic. The inverter nonlinear characteristic results from the voltage drop, the inherent characteristic of the power semiconductor, and the dead time for preventing the short circuit of the inverter leg. This characteristic distorts the inverter output voltage and then, causes the motor flux estimation error. Although this characteristics do not significantly effect in the general-purpose induction motor control, but significantly effect on the low-speed operation of high performance motor control such as the sensorless vector control.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.491-494
• /
• 2006

The output performance characteristics for surveyed sites were analyzed, using developed model. It consists of two main parts, the deciding flow duration characteristic of river and performance prediction model to estimate the output characteristics of small hydropower plants. As a result, it was found that the flowrate concerning with 25% of time ratio on flow duration curve can be selected to design flowrate of small hydropower plants, and the output characteristics of small hydropower plants having overflow dam are different from large scale hydropower plants.

• 대한전기학회논문지
• /
• 제36권9호
• /
• pp.685-690
• /
• 1987

Adaptive design of IIR digiral filters using equation error method has been studied. In this paper, a design technique of IIR digital filters using output error method with adaptive compensator is presented. In computer simulation results, it is shown that flat response characteristic in pass-band, below-40[dB] attenuation characteristic in stop-band, sharf cut-off characteristic in transition-band, and phase characteristic is linearin pass-band.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.85-88
• /
• 2016

90도 하이브리드 커플러에서 두 개의 출력 단자는 일반적으로 90도 위상차의 동일 전력으로 분배된다. 90도 하이브리드 커플러의 두 개의 출력 단자는 입력 단자로부터 전기적 길이가 다르기 때문에 주파수에 따라 서로 다른 출력 기울기를 갖는다. 즉, 동일 전력으로 분배하는 90도 하이브리드 커플러는 중심 주파수에서만 동일한 전력으로 분배되고, 중심 주파수에서 멀어질수록 두 출력 단자에서의 출력 전력은 차이가 크게 발생한다. 본 논문에서는 입력단자와 가까운 거리에 있는 출력단자에 사이에 존재하는 특성임피던스 $35-{\Omega}$의 ${\lambda}/4$ 길이의 선로를 변형시켜 광대역에서 두 개의 출력 단자의 출력 특성이 동일하도록 개선시켰다. 제안된 회로는 ADS(advanced Design System)을 이용하여 살펴보면 두 개의 출력 전력의 차이가 중심주파수 대비 약 20% 대역 이상에서 0.2dB 이내의 값을 가짐을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1462-1464
• /
• 1998

Poly-Si TFT(Thin Film Transistor) is a electronic device that can be applied to the field of large area electronics such as AMLCD. We have fabricated the poly-Si TFT with lateral body terminal that is counter-doped body electrode and investigated the electrical characteristics of it. The lateral body terminal being short with s terminal, we have measured the transfer charac (Vg-ld) and the output characteristic (Vd-ld) fabricated devices. The measured result showe only that leakage current in OFF-state was re and Kink effect in ON-state was suppressed bu that in output characteristic curve the output Id was sustained constantly with the output v Vd in the saturation region.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.29-34
• /
• 2007

The input and output impedances in a low voltage distribution system is one of the most important matters for power line communication because from the viewpoint of communication, the attenuation characteristic of the high frequency signals is greatly caused by impedance mismatch during sending and receiving. The frequency range is from 1MHz to 30MHz. Therefore, this paper investigates the input and output impedances in order to understand the characteristic of high frequency signals in the low voltage distribution system between a pole transformer and an end user. For power line communication, the model of Korea's low voltage distribution system is proposed in a residential area and then the low voltage distribution system is set up in a laboratory. In the low voltage distribution system, S parameters are measured by using a network analyzer. Finally, input and output impedances are calculated using S parameters.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.407-412
• /
• 2012

This study investigated the process of thermal-induced growth of micro-crack developed at the crystalline solar cell using EL image, determined the output characteristic according to the pattern of micro-crack, analyzed the I-V characteristic according to the pattern of crack growth, and predicted the output value using simulation. The purpose of this study was, therefore, to investigate the process of thermal-induced growth of micro-crack developed at the early stage of PV module completion using EL image, to analyze the resulting decrement of output and predict the output value using simulation. It was observed that the crack grew increasingly by the thermal condition, and accordingly the lowering of output was accelerated. The output values of crack patterns with various direction were predicted using simulation, resulting in close I-V curve with only around 4% of error rate. It is considered that it is possible to predict the electric characteristic of solar cell module using only pattern of micro-crack occurred at solar cell based on our results.

• 신재생에너지
• /
• 제2권2호
• /
• pp.81-85
• /
• 2006

The output performance characteristics for surveyed sites were analyzed, using developed model. It consists of two main parts, the deciding flow duration characteristic of river and performance prediction model to estimate the output characteristics of small hydropower plants. As a result, It was found that the flowrate concerning with 25% of time ratio on flow duration curve can be selected to design flowrate of small hydropower plants, and the output characteristics of small hydropower plants having overflow dam are different from large scale hydropower plants.

• 전자공학회논문지
• /
• 제54권2호
• /
• pp.133-138
• /
• 2017

본 논문은 RC 시정수 회로를 이용하여 지터 특성을 개선한 위상고정루프의 구조를 제안하였다. RC 시정수 회로에서는 루프 필터 전압이 작은 시정수와 큰 시정수 값을 가지는 회로를 통과하여 비교기로 전달된다. 작은 시정수 값을 가지는 회로를 지나는 신호는 거의 루프 필터 출력 전압과 같은 값을 가진다. 큰 시정수 값을 가지는 회로를 지나는 신호는 루프 필터 출력전압의 평균값을 가지며, 비교기회로에서 기준 신호 역할을 한다. 비교기의 출력 신호는 루프 필터에 전류를 공급하는 보조 전하펌프를 제어한다. 루프 필터 출력 전압이 상승하면 보조 전하펌프는 루프 필터에서 전류를 방전시켜 루프 필터 출력 전압이 하강하게 하고, 또는 루프 필터 출력 전압이 하강하면 보조 전하펌프는 루프 필터에서 전류를 충전시켜 루프 필터 출력 전압이 상승하게 한다. 이런 부궤환 루프는 필터 출력 전압 변동 폭을 줄여서 지터 크기를 감소시켜준다.