• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.706-712
• /
• 2004

This paper presents the design technique of output multiplexer(OMUX) for the Ka-band satellite transponder. Output multiplexer consists of low-pass filter(LPF), channel filter and manifold. Channel filters adopt dual-mode technique in design for mass and volume reduction and frequency response of channel filters is 4-pole elliptic response for high frequency selectivity. w-pass filters are designed to be of 13th order corrugated type for high rejection characteristic over reception band of satellite transponder. After initial design of channel filters and manifold, we optimized only a few design parameters for fast and easy optimization instead of optimizing all the design parameter. Measured results of a realized output umltiplexer for Ka-band satellite transponder show good agreement with the computed ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2291-2293
• /
• 2011

In this paper, the composes with digital position with a computer logical operation order with the signal processing method which is pliability and result of the logical operation which confronts in input signal from the outside input-output Channel leads and about the drive which the possibility to output at the outside is a research. This Decoder IC Multiplexer & De-multiplexer, position the function with from the digital signal circle where the imagination embodiments and BIT outputs of IC etc. are possible is possible in basic and usefully from the general industrial, could be used.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.787-798
• /
• 1995

We implement the E-plane T-juncition manifold mutiplexer having low insertion loss for output multiplexer of Ku-band satellite transponder. Manifold multiplexer implemented here is composed of 2 channel filters, T-junctions, half-wave waveguide connecting channel filters and manifold, and manifold itself.[1-4] Considering the mass and volume of the satellite transponder, the channel filters are designed to dual-mode.[5-13] And Elliptic filter function is used, which has good characteristics of suppressing the interference between 2 channels. Since the performance of manifold multiplexer depends on the manifold waveguide transmission line length, it's necessary proper analysis. In this paper, we do optimization process of T-junction and other elements by using CAD and implement the manifold multiplexer. An experiment shows that characteristic response of multiplexer matches wel its modeling result.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.332-338
• /
• 2022

The article presents a concept of designing a Multiplexer circuit which acts as a "Selector" and that becomes capable to select different speed created at different TTL Gate configurations; Standard TTL(Normal Speed), High Speed TTL(High Speed), Schottky TTL(Super High Speed) and further connect the selected Gate speed to the CAR shape created using C-Programming at Computer Graphics and finally CAR shape display at different speed to the color TV. The Multiplexer supporting efficient and more reliable selection criteria using "Logical based selection criteria" and further the output from multiplexer is provided to CAR shape created using c-programming and finally CAR shape is display to color TV system. Basic purposes and assumptions regarding the design and development of this system as well as a description of its operation have been presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1383-1390
• /
• 2007

In this paper, we study an optical add-drop multiplexer which consists of the fiber Bragg grating filter and investigate the temperature characteristics of it. To resolve the characteristics, we find and analyze numerically its temperature response, and fabricate an optical add/drop multiplexer and measure its output spectrum. From the obtained results, they show that the center wavelength of output spectrum shifts approximately 0.01230 nm/$^{\circ}C$ within a temperature range $-30{\sim}90^{\circ}C$.

• Journal of IKEEE
• /
• v.12 no.1
• /
• pp.43-50
• /
• 2008

In this paper, the output and temperature characteristics for an optical signal of the fiber bragg grating have been considered. Also, output characteristics which depend on the temperature changes have been investigated for an all-optic add/drop multiplexer based on the fiber bragg grating and Mach-Zehnder interferometer. From the obtained results, they show that the center wavelength of output spectrum shifts approximately 0.01230 nm/$^{\circ}C$ within a temperature range $-30^{\circ}C{\sim}90^{\circ}C$.

• Journal of electromagnetic engineering and science
• /
• v.5 no.4
• /
• pp.176-182
• /
• 2005

In this paper, an efficient multipaction analysis method of a manifold multiplexer for satellite applications is presented. While FEM(Finite Element Method) is used for the multipaction analysis of the lowpass filter, the equivalent circuit model is used for the analysis of the channel filters and the manifold. Employing equivalent circuit model for multipaction analysis takes less time than using EM(Electromagnetic) field analysis method while keeping the accuracy of the multipaction analysis. This present analysis method is applied to the manifold multiplexer for Ka-band satellite transponders and the results show that the present method is as accurate as the conventional EM field analysis method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.22-29
• /
• 2007

A 2.5Gb/s 2:1 multiplexer(MUX) IC using $0.18{\mu}m$ CMOS was designed and fabricated. Inductive peaking technology was used to improve the performance. On-chip micro spiral inductor was designed to maximize the inductive peaking effect without increasing the chip area much. The designed 4.7 nH micro-spiral inductor was $20\times20{\mu}m2$ in size. 2:1 MUX with and without micro spiral inductors were compared. The rise and fall time was improved more than 23% and 3% respectively using the micro spiral inductors for 1.25Gb/s signal. For 2.5 Gb/s signal, fall and rise time was improved 5.3% and 3.5% respectively. It consumed 61mW and voltage output swing was 1$180mV_{p-p}$ at 2.5Gb/s.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.237-240
• /
• 2001

Dense Wavelength division multiplexing(DWDM) lightwave system requires multiplexer, demultiplexer and optical filter. In this paper, thus, we propose the Add-Drop Mux/Demux based on a Mach-Zehnder interferometer(MZI) with fiber Bragg grating(FBG). The Add-Drop Mux/Demux using FBG and MZI is able to minimize system and reduce weight. We also analyze output characteristics of Add-Drop Mux/Demux and present the optimum design data through the computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.47-53
• /
• 2003

This paper describes the design of a 155 Mb/s multiplexer-demultiplexer chip. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s serial data output, and is to deinterleave a serial input bit stream of 155 Mb/s into the parallel output of 51 Mb/s The input and output of the device are TTL compatible at the low-speed end, but 100K ECL compatible at the high-speed end The device has been fabricated with a 0.7${\mu}m$ BiCMOS gate array The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 470 ps at the high-speed end. And power dissipation is evaluated under 2.0W.