• 태양에너지
• /
• 제19권4호
• /
• pp.63-69
• /
• 1999

The conventional grid connected PV(Photovoltaic) system has a unstable output pattern due to its dependence on the weather condition, although solar-cell array averagely has a regular output characteristics to have a peak output nearly at noon. Therefore assuming the high density grid connection in the future, this unstable output pattern can be one of the main reasons to generate power disturbance such as voltage variation, frequency variation and harmonic voltage generation in low voltage distribution line. However general grid connected solar-cell system do not have functions to cope with these disturbances. Therefore this study proposed a advanced type grid connected PV system with functions to suppress output power fluctuation due to solar-cell array output variation and showed the levelling effect of fluctuation due to instantaneous array output variation.

• 기술혁신학회지
• /
• 제7권2호
• /
• pp.283-304
• /
• 2004

Evaluating the sources of economic output is obviously important, and numerous attempts have been made to judge the impact of many different factors on economic output. It is widely accepted that high-technology(HT) is one of the important factors in economic output. This paper empirically explores the impacts of HT exports on economic output using a cross-county analysis based on data from 89 countries for the year 1988-2000. To this end, several versions of the neoclassical growth models, explicitly including HT exports, are estimated. Subject to the appropriate caveats, the results provide further support for several key conclusions of the former studies - investment in physical capital, population growth, and the human capital are important in accounting fer economic output across countries. More importantly, it is concluded that HT exports significantly contribute to economic output. Interestingly, the conclusion is valid f3r developing countries, but not far developed countries.

• 한국전자통신학회논문지
• /
• 제10권10호
• /
• pp.1079-1086
• /
• 2015

본 논문은 안전 무결성 레벨이 4(: Safety Integrity Level 4)인 안전 관련 시스템에 적합한 출력 모듈의 구조를 설계하였고, 설계된 출력 모듈에 요구되는 정량적 목표치의 수준을 제시하였다. 특히 다양한 출력 방식 중에서 릴레이 출력 신호와 아날로그 신호로 구성된 출력 모듈이 안전 기능을 수행하는 시스템의 구성 요소인 경우를 적용하였다. 분석 방법은 FMEA(: Failure Modes and Effect Analysis), FTA(: Fault Tree Analysis) 방식을 이용하였다. 그 결과로 철도 응용 규격인 IEC 62425의 요구사항을 준수하는 SIL4 안전 관련 시스템의 출력 모듈의 구조와 고장빈도인 정량적 목표치를 제시하였다.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.65-80
• /
• 2007

The input and output device requires precise color representation and CMS (Color Management System) because of the increasing number of ways to apply the digital image into electronic publishing. However, there are slight differences in the device dependent color signal among the input and output devices. Also, because of the non-linear conversion of the input signal value to the output signal value, there are color differences between the original copy and the output copy. It seems necessary for device-dependent color information values to change into device-independent color information values. When creating an original copy through electronic publishing, there should be color management with the input and output devices. From the devices' three phases of calibration, characterization and color conversion, the device-dependent color should undergo a color transformation into a device-independent color. In this paper, an experiment was done where the input device used the linear multiple regression and the sRGB color space to perform a color transformation. The output device used the GOG, GOGO and sRGB for the color transformation. After undergoing a color transformation in the input and output devices, the best results were created when the original target underwent a color transformation by the scanner and digital camera input device by the linear multiple regression, and the LCD output device underwent a color transformation by the GOG model.

• The Journal of Korean Physical Therapy
• /
• 제23권3호
• /
• pp.37-42
• /
• 2011

Purpose: The principal objective of this study was to evaluate the power output of ultrasound in Korean clinics and compare the value with Korean and global standards. Methods: A total of 69 units were measured for ultrasound power output. The normal range of power output level was ${\pm}30%$ of the output set according to KFDA standards. Device model, manufacturer, ERA, and BNR were obtained via simple questionnaires. A portable ultrasound power meter was used for output measurement. Results: 37 machines, with reported ERA values, were assessed for power output per unit area. Of these machines, 13 (37.14%) were considered to be compliant with US FDA standards at 0.5, 1.0, 1.5, $20W/cm^2$ and 18 (51.43%) were considered within KFDA standards. The remainder of the machines were outside the standard error and evidenced irregular output levels, even though most of them were the same model. Conclusion: Appropriate ultrasound intensity is incredibly important for safety and effective use. Therefore, the KFDA standards regarding ultrasound may require revision in light of global standards, including BNR and ERA additionally, attention should be paid to regular calibration for safe use in clinical practice.

• 전기전자학회논문지
• /
• 제9권1호
• /
• pp.72-78
• /
• 2005

본 논문은 단일입력 단일출력 비선형 계통에 대해서 강인한 출력궤환 제어기를 제시한다. 이전의 출력궤환 비선형 제어기가 모두 동적인 관측기 기반으로 설계된 반면 본 논문에서는 출력의 과거값들만을 이용하여 상태변수를 추정하는 새로운 방식을 제안하고 이를 후방차분 상태추정기라 명했다. 실제 상태변수값과 추정치와의 오차를 보상하기 위해서 제어입력에 강인제어항을 추가하였고 그것의 이득을 자동으로 조정하는 적응 알고리듬을 채택했다. 전체 폐루프 시스템은 출력 추종 오차가 점근적으로 안정하도록 그리고 모든 신호가 유계이도록 제어입력과 적응법칙이 설계된다. 제시된 제어기를 역진자 계통에 적용한 모의실험을 통해서 성능을 검증하였다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1912-1919
• /
• 2018

The output capacitance of power semiconductor devices is important in determining the switching losses and in the operation of some resonant converter topologies. Thus, it is important to be able to accurately determine the output capacitance of a particular device operating at elevated power levels so that the contribution of the output capacitance discharge to switch-on losses can be determined under these conditions. Power semiconductor switch manufacturers usually measure device output capacitance using small-signal methods that may be insufficient for power switching applications. This paper shows how first principle methods are applied in a novel way to obtain more relevant large signal output capacitances of Gallium-Nitride (GaN) FETs using the drain-source voltage transient during device switch-off numerically. A non-linear capacitance for an increase in voltage is determined with good correlation. Simulations are verified using experimental results from two different devices. It is shown that the large signal output capacitance as a function of the drain-source voltage is higher than the small signal values published in the data sheets for each of the devices. It can also be seen that the loss contribution of the output capacitance discharging in the channel during switch-on correlates well with other methods proposed in the literature, which confirms that the proposed method has merit.

• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• 전자공학회논문지SC
• /
• 제42권3호
• /
• pp.25-32
• /
• 2005

PLC는 공장자동화 설계에서 가장 많이 사용되고 있으며, PLC 언어에 대한 연구도 활발히 이루어지고 있다. 본 논문에서는 PLC를 사용한 공장 자동화 설계에서 제어하고자 하는 출력 기기의 수가 증가되었을 때 출력을 확장하는 방법을 제안한다. 기본 베이스에 출력 유닛을 더 이상 장착할 수 없는 상태에서 출력 점수를 $2{\sim}3$점 확장하고자 한다면, 증설베이스와 파워서플라이, 증설케이블 및 출력 유닛을 별도로 장착하여야 한다. 그러면 비용이 상당히 추가되어야 한다. 본 논문에서는 출력을 소량으로 확장하는 방법을 제안한다. 즉, 출력 유닛의 접점을 입력받아 디코딩하는 확장모듈과 인코딩 및 디코딩하여 최종 출력접점으로 확장하는 프로그램 모듈을 설계하고, 실험을 통해 그의 타당성을 확인하였다.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.171-178
• /
• 1998

일반적으로 발진기 설계에서 출력에 가장 큰 영향을 미치는 부분이 출력단 정합부분인데 기존의 출력단 정합 방법은 스미스차트의 무한대 임피던스 근방에서 정합회로를 설계해야 하므로 최적의 출력 정합회로를 구현해 주기가 어렵다. 본 논문에서는 초고주파 발진기를 설계하는데 있어서 보다 쉽게 최대 발진출력을 얻기 위한 출력단 정합방법에 관하여 연구하였다. 출력단이 정합되지 않은 발진기에 3-dB Coupler Tuner를 연결하고 발진기가 동작하고 있는 상태에서 Tuner 의 가변 단락회로를 조정하여 최대출력이 나오는 지점을 확인하고, Tuner의 S 파라미터를 측정한 후 이를 마이 크로스트립으로 구현하는 벙법을 이용하여 최대 발진출력이 나오는 발진기를 쉽게 설계 제작할 수 있었다. 본 논문에서 제안한 방법으로 설계 제작한 발진기 출력과 기존 정합방법에 의한 발진기 출력을 비교해 보면, 기존의 정합방법에 의한 발진기 출력은 발진주파수 1.0338 GHz에서 6.45 dBm을 나타내었고, 본 논문에서 제시 한 방법으로 제작된 발진기의 출력은 9.71 dBm으로 기존의 정합방법에 의한 발진기 출력보다 3.26 dBm 높은 출력을 나타내었다.