• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.170-180
• /
• 1995

A parallel crack in bonded dissimilar orthotropic planes under out-of-plane loading is analyzed. The problem is formulated by Fourier integral transforms, and reduced to a pair of dual integral equations. By solving the integral equations, the asymptotic stress and displacement fields near the crack tip are determined in closed form, from which the stress intensity factor and energy release rate are obtained. Discontinuity in the stress intensity factor as the distance ratio h/a of the parallel crack approaches zero is found, while the energy releas rate is shown to be continuous at h/a = 0. This information can immediately be used to generate the stress intensity factor for the parallel crack near the interface. By employing "the maximum energy release rate criterion", it could be shown in the case of no existing crack initially that the parallel crack is formed far from the interface for the more compliant material, while it is formed close to the interface for the stiffer material. material.

• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.677-691
• /
• 2019

In recent years, interest is growing in the engineering community on the experimental assessment and the theoretical prediction of the out-of-plane (OOP) seismic response of unreinforced masonry (URM) infills, which are widespread in Reinforced Concrete (RC) buildings in Europe and in the Mediterranean area. In the literature, some mechanical-based models for the prediction of the entire OOP force-displacement response have been formulated and proposed. However, the small number of experimental tests currently available has not allowed, up to current times, a robust and reliable evaluation of the predictive capacity of such response models. To enrich the currently available experimental database, six pure OOP tests on URM infills in RC frames were carried out at the Department of Structures for Engineering and Architecture of the University of Naples Federico II. Test specimens were built with the same materials and were different only for the thickness of the infill walls and for the number of their edges mortared to the confining elements of the RC frames. In this paper, the results of these experimental tests are briefly recalled. The main aim of this study is comparing the experimental response of test specimens with the prediction of mechanical models presented in the literature, in order to assess their effectiveness and contribute to the definition of a robust and reliable model for the evaluation of the OOP seismic response of URM infill walls.

• Structural Engineering and Mechanics
• /
• 제81권3호
• /
• pp.379-394
• /
• 2022

Shallow footings usually belonged to the category of thick plate structures. For accurate analysis of thick plates, the contribution of out-of-plane components of the stress tensor should be considered in the formulation. Most of the available shallow footing models are based on the classical plate theories, which usually neglect the effects of the out-of-plane stresses. In this study, a mixed-field plate finite element model (FEM) is developed for the analysis of shallow footings rested on soil foundations. In addition to displacement field variables, the out-of-plane components of the stress tensor are also assumed as a priori unknown variables. For modeling the interaction effect of the soil under and outside of the shallow footings, the modified Vlasov theory is used. The tensionless nature of the supporting soil foundation is taken into account by adopting an incremental, iterative procedure. The equality requirement of displacements at the interface between the shallow footing and soil is fulfilled using the penalty approach. For validation of the present mixed FEM, the obtained results are compared with the results of 3D FEM and previous results published in the literature. The comparisons show the present mixed FEM is an efficient and accurate tool for solving the problems of shallow footings rested on subsoil.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.553-564
• /
• 2020

In this study, a simple numerical approach for a circular tunnel opening in strain-softening surrounding rock is proposed considering out-of-plane stress and seepage force based on Biot's effective stress principle. The plastic region of strain-softening surrounding rock was divided into a finite number of concentric rings, of which the thickness was determined by the internal equilibrium equation. The increments of stress and strain for each ring, starting from the elastic-plastic interface, were obtained by successively incorporating the effect of out-of-plane stress and Biot's effective stress principle. The initial value of the outmost ring was determined using equilibrium and compatibility equations. Based on the Mohr-Coulomb (M-C) and generalized Hoek-Brown (H-B) failure criteria, the stress-increment approach for solving stress, displacement, and plastic radius was improved by considering the effects of Biot's effective stress principle and the nonlinear degradation of strength and deformation parameters in plastic zone incorporating out-of-plane stress. The correctness of the proposed approach is validated by numerical simulation.

• 대한치과교정학회지
• /
• 제10권1호
• /
• pp.29-36
• /
• 1980

Inclined plane, one of frequently used orthodontic appliances, may cause posterior displacement of mandible and injure the normal growth of temporomandibular joint. So author carried out the mandibular posterior displacement experimentally induced by inserting inclined plane in the rat incisors in order to investigate the histological reactions occuring in the temporomandibular joint of experimental animals. Following results were obtained. 1. The posterior displacement of condyle resulted in the widening of anterior synovial space with anterior condylar hyperplasia and posterior condylar atrophy. In addition, tissue changes were more severe in young rats than in adult rats. 2. The tissue reactions were localized only to condylar head ana there were no evidence of traumatic features in young rats. In adult rats, hemorrhage was an additional finding 1 week after experiment. 3. The remodelling processes were accompanied by the increasing or reduction of fibrous layer and subsequent replacement by cartilage layer occured massively and abruptly in young rats, it occured slightly and slowly in adult rats. 4. The remodelling process of injured condyle occured from 1 week to 4 weeks after experiment and completed between 8 weeks after experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.61-67
• /
• 1997

The electronic speckle pattern interferometer (ESPI) has been applied to many technical problems such as deformation and displacement measurement, strain visualization and surface roughness monitoring. In this study, we used an ESPI system based on the dual beam speckle interferometer method in order to measure in-plane displacement and vibration mode using the ESIP technique. This research was carried out for the purpose of applying the vibration analysis method employing Electro-Optic holographic interference technique to the vibration analysis of uniform rectangular cantilevers plate(SS400,STS304) with cantilevers span to breadth ratio of 150 by 75. And thickness of 1mm and 0.8mm respectively. We improved the ESPI technique in order to obtain the distribution of displacement component resolved in one direction through a CCD camera combined with an image processing system. To certify and to assess the accuracy in measuring by this ESPI, the results obtained with the speckle method and vibration mode analysis are to be compared with those results by Warbuton's Theoretical expression and vibration made in FEM analysis.

• Structural Engineering and Mechanics
• /
• 제43권6호
• /
• pp.739-759
• /
• 2012

The tailoring optimization technique recently developed by the author for improving structural response and energy absorption of composites is extended to sandwich shells using a previously developed zig-zag shell model with hierarchic representation of displacements. The in-plane variation of the stiffness properties of plies and the through-the thickness variation of the core properties are determined solving the Euler-Lagrange equations of an extremal problem in which the strain energy due to out-of-plane strains and stresses is minimised, while that due to their in-plane counterparts is maximised. In this way, the energy stored by unwanted out-of-plane modes involving weak properties is transferred to acceptable in-plane modes. As shown by the numerical applications, the critical interlaminar stress concentrations at the interfaces with the core are consistently reduced without any bending stiffness loss and the strength to debonding of faces from the core is improved. The structural model was recently developed by the author to accurately describe strain energy and interlaminar stresses from the constitutive equations. It a priori fulfills the displacement and stress contact conditions at the interfaces, considers a second order expansion of Lame's coefficients and a hierarchic representation that adapts to the variation of solutions. Its functional d.o.f. are the traditional mid-plane displacements and the shear rotations, so refinement implies no increase of the number of functional d.o.f. Sandwich shells are represented as multilayered shells made of layers with different thickness and material properties, the core being treated as a thick intermediate layer.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.131-135
• /
• 1990

The combined technique of holographic interferometry and speckle photography, so called holospeckle interferometry, has been attention for the measurement of 3-D displacements. This new technique enables the researcher to obtain information of in plane and out-of plane displacements from one photographic plate. There is room for further development of special optical arrangement in order to apply holospeckle interferometry in specific field. In this study, the enlarged fringe pattern was obtained by specifical optical arrangement.

• 한국전산구조공학회논문집
• /
• 제22권2호
• /
• pp.189-196
• /
• 2009

본 논문에서는 적층구조 해석을 위해 부분 선형 층별이론에 의해 정식화된 저매개변수 유한요소 모델을 제안한다. 얇은 직교이방성 문제뿐만 아니라, 두꺼운 식교이방성 적층판 해석을 위해 제안된 모델은 2차원 세분화 기법에 기초를 두고 있다. 즉, 이 모델은 두께방향으로의 면내거동에 대해서는 선형변화로 가정하는 층별분리 이론이 적용되고, 두께방향으로의 면외거동에 대해서는 상수로 가정하는 등가단층이론이 사용된다. 변위장을 정의하기 위해 적분형 르장드르 다항식이 사용된다. 또한 가우스-로바토 적분법을 사용하여, 적층평판의 종래의 가우스적분점이 아닌 절점의 위치에 발생하는 최대응력값을 별도의 외삽법을 사용하지 않고 바로 산출하였다. 제안된 모델의 정당성과 특성은 직교이방성 다층적층판 문제를 사용하여 검증되었으며, 그 결과는 출판된 참고문헌의 값들과 비교되었다. 이 연구에서는 최적의 유한요소 적층모델을 결정하기 위해 응력과 최대처짐을 사용한 수렴성조사가 수행되었다. 또한, 적층 수의 증가에 따른 두께방향으로의 변위와 응력분포의 변화가 조사되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.529-533
• /
• 1994

Atrains in microstain range are measured accurately by means of holographic interometric technique. Holographic fringes of the cantilever beam subjected to out-of-plane deflection and in-plane deflection respectively are obtained experimentally. Form these fringe patterns, 3rd order polynomial of displacements is induced using polynomial regression method. And strain stress distribution could be determined from the secound derivative of this polynomial. These results agree well with FEM.