• 헤리티지:역사와 과학
• /
• 제56권4호
• /
• pp.192-214
• /
• 2023

목조건축문화재는 그 나라의 정체성을 보여주는 가시적인 유물 가운데 하나이다. 문화재의 원형에 대한 개념이 정확하게 이해되지 않은 상태에서도 문화재는 '원형보존' 또는 '원형유지'를 보존관리의 원칙으로 삼았다. 더구나 요즈음은 국제적인 보존원칙의 흐름을 따라 문화재를 '역사적 대상물로의 가치'로서 중요하게 생각하고 있다. 이 논문은 목조건축문화재의 원형유지를 위해 어떤 부분을 모니터링 해야 하는가의 범위와 내용을 정해 보기 위한 시도의 결과이다. 목조건축문화재의 모니터링에 있어서 첫 번째로 해야 할 부분은 지면과 기단의 상태를 점검하는 일이다. 지면과 기단은 목조건축문화재가 오랫동안 서 있을 수 있도록 모든 힘을 받아 주는 곳이기 때문이다. 따라서 기단부와 낙수의 관계, 기단부의 침하 유무, 배수로의 유무와 구배 상태 확인 등을 모니터링 하였다. 두 번째는 기둥 부분이다. 기둥 기울음의 유무, 귀솟음과 안쏠림의 기법의 유무, 기둥 치수의 변화 유무, 기둥과 초석의 변위 발생 등을 확인하는 일이다. 기둥의 불안정성은 각 부재와의 이음과 맞춤 부분의 파손을 발생시키고 이로써 벽체의 손상까지로 이어지는 물리적 변화를 초래하기 때문이다. 세 번째는 지붕의 번와 유무, 번와에 따른 신·구 기와의 점유상태, 그에 따른 편심하중의 유무, 강우·강설에 의한 기와 사이의 이격 발생, 누수의 유무를 점검하였다. 지붕은 기와의 이격이나 파손에 의해 건물 내부로 누수가 지속되면 창방 이상을 부분 해체보수 해야 하기 때문에 가급적 원형유지를 위해서 모니터링 해야 한다. 시기적으로, 상태적으로 기준이 모호한 '원형보존'이나 '원형유지'를 문화재보존의 기본으로 하였어도 당시의 모든 현상은 문화재의 '원형'으로 보아야 한다. 그렇기 때문에 문화재돌봄에 있어서 기단부, 기둥, 지붕의 모니터링 범위는 당해 문화재에 어떠한 훼손이 일어나고 있는가를 확인하는 기준점이 된다. 다시 말하면 모니터링을 시작한 그 시점의 자료는 당해 연도의 '원형'이 된다. 지금에라도 현상에 대한 기록을 남기고 그것이 어떻게 변화되고 있는지, 훼손되고 있는지의 사진, 측정값, 도면 등의 여러 자료를 남겨두어야 후대가 필요로 하는 문화재의 '원형'에 대한 정보로 활용할 수 있을 것이다. 또 문화재 원형보존을 위한 모니터링의 분석에 따른 대안을 적극 도입하여야 한다. 그리고 문화재 모니터링의 결과물인 문화재의 현재 상태 및 상황을 여러 관련 기관과 공유하여서, 문화재의 '개입'에 의한 보존보다 예방보존을 구축해 나아가야 한다.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.411-421
• /
• 2013

Digital fountain codes are record-breaking codes for erasure channels. They have many potential applications in both wired and wireless communications. Most existing digital fountain codes operate over binary fields using an iterative belief-propagation (BP) decoding algorithm. In this paper, we propose a new iterative decoding algorithm for both binary and nonbinary fields. The basic form of our proposed algorithm considers both degree-1 and degree-2 check nodes (instead of only degree-1 check nodes as in the original BP decoding scheme), and has linear complexity. Extensive simulation demonstrates that it outperforms the original BP decoding scheme, especially for a small number of source packets. The enhanced form of the proposed algorithm combines the basic form of the algorithm and a guess-based algorithm to further improve the decoding performance. Simulation results demonstrate that it can provide better decoding performance than the guess-based algorithm with fewer guesses, and can achieve decoding performance close to that of the maximum likelihood decoder at a much lower decoding complexity. Last, we show that our nonbinary scheme has the potential to outperform the binary scheme when choosing suitable degree distributions, and furthermore it is insensitive to the size of the Galois field.

• Journal of Ship and Ocean Technology
• /
• 제9권3호
• /
• pp.1-13
• /
• 2005

A design procedure for a ship with minimum total resistance has been developed using a numerical optimization method called SQP (Sequential Quadratic Programming) to search for optimized hull form and CFD(Computational Fluid Dynamics) technique. The friction resistance is estimated using the ITTC 1957 model-ship correlation line formula and the wave making resistance is evaluated using a potential-flow panel method based on Rankine sources with nonlinear free surface boundary conditions. The geometry of hull surface is represented and modified using B-spline surface patches during the optimization process. Using the Series 60 hull ($C_B$ =0.60) as a base hull, the optimization procedure is applied to obtain an optimal hull that produces the minimum total resistance for the given constraints. To verify the validity of the result, the original model and the optimized model obtained by the optimization process have been built and tested in a towing tank. It is shown that the optimal hull obtained around $13\%$ reduction in the total resistance and around $40\%$ reduction in the residual resistance at a speed tested compared with that of the original one, demonstrating that the present optimization tool can be effectively used for efficient hull form designs.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2000

Two hull forms of 2, 500 TEU Container Vessel, designed by Daedong Shipbuilding CO., LTD. were tested at the Circulating Water Channel of Chosun University for the evaluation of resistance performance. The test results of resistance, wave profile measurement and trim-sinkage measurement are compared in the form of diagrams and figures, and the results are discussed. A conclusion is drawn that the performance of modified form (model number : CU-201F2A2) is improved about 8% resistance performance at the design speed compare with original form (model number : CU-201F1A1).

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.197-206
• /
• 2012

This study focuses on comparative study of the representation of 'traditionality' in Asian hotel guest rooms. Hotel can be a concentration of the country's culture and tradition and provide unique experience to guests through its space, decoration, and material. However, most hotels in Korea are lack of a strong identity based on the Korean culture and tradition, due to adoptation of the western hotel styles without any criticism. The purpose of this study was to investigate the expression methods of the traditionality in Asian hotel guest rooms to provide design guideline to enhance identity of hotel guest rooms in Korea. Through analysis of the previous researches, criteria of the three design application methods and the five design elements were defined to analyze the representation of the traditonality. Design application methods were categorized as "Original form", "Partial adoption", and "Metaphor". Five design elements include "Shape", "Material", "Color", "Object", and "Pattern". Thirty nine Asian hotels containing the traditional design elements were explored in the study. In result, design application methods in Korea used all three methods equally, while other Asian countries used mainly the Partial adoption and Metaphor methods to express their traditions rather than the Original form method. All five deign elements were mostly used in case of the Original form methods, and two or three elements among five elements were used for the Partial adoption and Metaphor methods. The traditional representation of hotel guest rooms in Korea, reflecting current thinking, living pattern and culture, will be a solution for the new hotel design as well as elevation of Korea's status to a higher level.

• 건축역사연구
• /
• 제26권6호
• /
• pp.19-28
• /
• 2017

In this paper, I have reviewed some of the Korean traditional architectural vocabularies that have to be reconsidered in terms of the problem of decode, the problem of meaning, the meaning of explain meaning, and the problem of form analysis. Especially, correct decode and interpretation of Uigwe's Korean ancient architecture borrowed character can correct old decode and interpretation. Furthermore, I confirmed that I could correct the Korean ancient architecture vocabulary that was expiscated wrongly. Especially borrowed characters corresponding to 머름[meoreum](paneling) have been known only far away 遠音[meoreum]. In addition, there were also 遠驗[meolheom] 亇乙軒[meolheon] 亇乙險[meolheom] 亇乙音[meoreom], and so on. Furthermore, in the process of decode these notations, it has become possible to assume that the original words of the modern language 머름[meoreum] also came from *멀험[meolheom]. On the other hand, there are many kinds of people like 付叱心[bussim] 夫叱心[bussim] 扶叱心[bussim] 富叱心[bussim] 富心[bussim]과 北叱心 [bussim] 北心[bussim]. You can also check the Korean ancient architecture vocabulary. However, corresponding words are difficult to find in modern Korean languages. However, in Jeju dialect, we can confirm the corresponding word. This word was used in the Joseon Dynasty, and confirmed that it is dead language today. As mentioned above, it is confirmed that there are many misconceptions about the decode and meaning of the architectural vocabulary made of borrowed character in existing architectural dictionaries, Korean dictionaries, and Korean ancient architecture related papers. Also, although the form is being confirmed, it has been confirmed that there are many things that need to be clarified, such as what the decode is, what the meaning is, and the origin I have also confirmed a number of things that need to be properly expomed in the original form, the original word. In the future, those who study Korean ancient architecture vocabulary and traditional architectural vocabulary should also be interested in these things and research it properly.

• 한국수학사학회지
• /
• 제21권3호
• /
• pp.97-112
• /
• 2008

이 연구에서는 한국어 수사 하나, 둘, ..., 열의 어원에 대한 현재까지의 연구 결과를 수학사적인 관점에서 비판적으로 조망했다. 수학사적인 관점에서 보면, 하나, 둘, 셋의 어원을 찾는 일은 사실상 가능해 보이지 않는다. 셋과 넷, 넷과 다섯 사이에는 단절이 있었을 가능성이 있다. 하나, 둘, 셋, 넷의 어원은 다섯, 여섯, ..., 열의 어원과는 다른 측면에서 찾아야 할 것이다. 여섯과 일곱 사이에 단절이 있었을 가능성이 있다. 일곱, 여덟, 아홉의 조어 메커니즘은 동일할지 모른다. 아홉과 열 사이에 단절이 있었을 가능성이 있다. 현재까지의 연구에서는 이러한 단절에 충분히 주목하지 않고 있으나, 수학사에 따르면 수사의 발달에는 여러 번의 단절이 존재 했다.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.53-60
• /
• 1998

본 논문에서는 키보드를 사용하지 않는 PDA 등 휴대형 컴퓨터에서 입력의 수단으로 사용하는 온-라인 문자 인식기를 위한 문자 필기글꼴을 제안하였다. 제안된 필기글꼴은 키보드를 통하여 입력 가능한 수준의 한글 자소와 영숫자이며, 필기글꼴의 정의를 위하여 한글의 풀어쓰기 글꼴과 영문자의 PDA용 필기 패턴인 그래피티 문자를 분석하여, 한글과 영숫자 입력 모드 전환이나 필기 영역의 구분 없이 연속 필기하여도 인식 가능하도록 중복되는 글꼴을 갖지 않도록 하면서 최대한 원형을 유지하도록 하였다. 본 논문에서 제안한 필기글꼴의 타당성을 고찰하기 위하여 그래피티 문자를 알고 있는 PDA 사용자 그룹과 일반인들을 대상으로 인지도와 만족도를 조사하였다. 두 피실험 그룹의 영숫자 및 한글의 자음의 인지도 및 만족도는 98% 이상이었고 한글 모음의 경우 95% 이상의 긍정적인 반응을 얻었다.

• 패션비즈니스
• /
• 제17권1호
• /
• pp.131-144
• /
• 2013

The purpose of this study was to analyse the structure and contents of clothing construction field in the middle-school textbook of technology and home economics with curriculum revised in 2007. 10 kinds of textbooks certified by Ministry of Education, Science and Technology in 2010 were selected and home economics field in them was the subject of this study with the external characteristics such as textbook system, instruction area and contents included. This study was content analysis-oriented and descriptive with data calculated by frequency and percentage. The findings are as follows. In 'Reality of Home-Life', food life area showed highest as 34.4% followed by clothing life(28.7%) and dwelling life(28.7%). The portion of present teachers in writing staffs was highest while there was no textbook where professors of each field were included in writing staffs. The contents of costume society, clothes material, clothes management from section 'Choice and Management of Clothes' in the chapter 'Family Life' and clothing construction from the section 'Making and Modifying Clothes' of the chapter 'Reality of Home-Life' were analysed in this study. Clothing construction-related fields were suggested separately by method of measurement, construction theory, drafting theory, drafting an original form, fabric trimming, utilization of the original form, length measure, cloth cutting, hand stitching, how to use a sewing machine, basting and correction, needlework process, completion, and evaluation. The contents of the unit 'Making Shorts' were about clothing construction theory, human body measurement, drafting an original form, process of making shorts and activity/research/experience. The contents of the unit 'Wearing Clothes after Fixing' in clothing construction-related field were about how to fix and recycling.

• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.63-71
• /
• 2010

FormFactors is one of the most critical design factors in early development of mobile phone, and proper selection of FormFactors is necessary for smoothness of product development and customer satisfaction. Especially, emergence of mobile convergence added so various functions besides its original call function that importance of selecting FormFactors has increased because multiform FormFactors are needed. However there is problem such as frequent change of decision making in existing process because established process picks out FormFactors sensibly and arbitrarily through idea pull and so forth. We proposed FormFactors selection process by Axiomatic Design, set approach method and block approach method for reasonable and systematical FormFactors selection. First of all, we set the purpose of mobile phone development, and it is examined by Axiomatic Design. FormFactors design matrix is deduced through this process, the numbers of axes and rails are proposed using set approach method, and then patterns of FormFactors are embodied by block approach method. Particularly process application was tried through case study of mobile phone development, and we ensured that new FormFactors can be presented to a designer by systematical verification if change of customer requirements occurs through our process.