• 품질경영학회지
• /
• 제38권4호
• /
• pp.540-548
• /
• 2010

We consider the problem of selecting the most profitable initial process mean and length of production cycle for manufacturing processes subject to a constant linear trend during the same cycle that varies after resetting the processes. Assuming that the quality characteristic of interest is normally distributed, the optimum initial process mean and the length of production cycle are jointly obtained by minimizing the expected loss per unit time. We assume that the quality loss function due to the deviation from the target value is quadratic and resetting loss is constant. We consider both cases of symmetric and asymmetric quality loss function. An illustrative example is given and sensitivity analysis performed.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.187-192
• /
• 1991

We consider a filling process problem on a production line. Up to present this problem have examined by 100% inspection. Thus a target value is determined which takes into account the regular selling prices, the reprocess cost, the excess quality cost and the process variability and so on. However, in this paper we propose a solution under specified sampling plan when the inspection is nondestructive.

• Journal of Information Technology Applications and Management
• /
• 제13권4호
• /
• pp.1-12
• /
• 2006

Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimator and maximum likelihood estimator for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

• 전자공학회논문지
• /
• 제52권3호
• /
• pp.13-18
• /
• 2015

본 논문은 GNSS의 문제점인 위치오차와 실외음영지역을 해소하기 위하여 GNSS와 vision system을 융합한 신뢰성있는 고정밀 측위와 최적의 vision system을 분석하였다. 위치결정을 위해서는 최소 4개 이상의 GNSS로부터 신호를 수신 받아야 한다. 그러나 도심지역에서는 고층건물이나 장애물 또는 반사파에 의해 정확한 위치가 어렵다. 이러한 문제점을 해결하기 위하여 vision system을 이용한다. GNSS를 사용하기 열악한 도심지역의 target object에 정확한 위치 값을 결정해 놓는다. 그리고 vision system을 이용해 target object를 인식하고, 인식된 target object를 이용하여 위치오차를 보정해 준다. 이동체는 이동 중 vision system을 이용하여 target object를 인식하여 위치 데이터 값을 만들어내고, 위치 계산을 수정하여 안정되고 신뢰성 있는 고정밀 측위를 할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1109-1112
• /
• 2005

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. The optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권1호
• /
• pp.18-25
• /
• 2002

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. the optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.

• 공업화학
• /
• 제21권5호
• /
• pp.559-563
• /
• 2010

천연색소를 이용한 컬러의 재현은 현대의 웰빙 생활과 밀접한 연관성을 갖게 된다. 이 연구는 일상생활에서 자주 쓰이는 녹색 계, 황색 계, 그리고 적색 계의 컬러를 자연 상의 녹차, 치자, 흑미를 색소원으로 하여 목표 색을 설정하였다. 목표색의 명도(L), 색 좌표(a, b)의 정량적 수치 값을 지정하고 추출용매의 물성을 조절함으로써 목표 색에 가장 접근하는 색을 추출하여 표현하였다. 색소추출 공정에서 용매의 pH, 추출온도, 추출시간이 변수로 설정되었다. 치자의 경우 추출시간이 길수록 진한색이 추출되었다. 추출색소는 색차계를 이용해 색의 L-a-b좌표를 측정하여 목표 색과 비교하였다. 실험조건을 최적화함으로써 목표 색과 가장 색차 값(${\Delta}E$)이 적은 녹색, 황색, 적색의 CIE 기준 값을 제시하고 이 좌표에 맞는 색을 표현하였다.

• 대한산업공학회지
• /
• 제25권1호
• /
• pp.1-7
• /
• 1999

This paper considers the problem of determining the optimum target values of the quality characteristic of interest Y and the screening limits of a surrogate variable X which is correlated with Y under two-stage screening procedure. In the two-stage screening procedure, X is measured first to decide whether an item should be accepted, rejected or additional observations should be taken. If it is difficult to decide on the result of measured value of X, Y is then observed to classify the undecided items. Assuming that Y and X are jointly normally distributed, a model is constructed which involves selling and reduced prices, production, inspection, and penalty costs. Methods of finding the optimum process mean and the screening limits are presented. A numerical example and analysis of the results are also presented.

• 한국물환경학회지
• /
• 제21권4호
• /
• pp.379-384
• /
• 2005

In this research, coagulation was employed as the pretreatment for membrane process. The effective coagulation conditions were decided after the discussion of different coagulant doses and mixing conditions, etc. Raw water was taken from Nakdong River. The best operation occurred when G value was $230s^{-1}$ and the slow mixing lasted around 5 minutes at G value was $23s^{-1}$. To investigate the optimum coagulant dosage, the optimum organics removal was target as organic removal reduces membrane fouling effectively than particle removal. This result indicated that organics are more important causes than turbidity for membrane fouling. However, turbidity becomes an important factor after certain amount of organic matters is removed.