• Journal of Korean Society for Quality Management
• /
• v.38 no.4
• /
• pp.540-548
• /
• 2010

We consider the problem of selecting the most profitable initial process mean and length of production cycle for manufacturing processes subject to a constant linear trend during the same cycle that varies after resetting the processes. Assuming that the quality characteristic of interest is normally distributed, the optimum initial process mean and the length of production cycle are jointly obtained by minimizing the expected loss per unit time. We assume that the quality loss function due to the deviation from the target value is quadratic and resetting loss is constant. We consider both cases of symmetric and asymmetric quality loss function. An illustrative example is given and sensitivity analysis performed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.24
• /
• pp.187-192
• /
• 1991

We consider a filling process problem on a production line. Up to present this problem have examined by 100% inspection. Thus a target value is determined which takes into account the regular selling prices, the reprocess cost, the excess quality cost and the process variability and so on. However, in this paper we propose a solution under specified sampling plan when the inspection is nondestructive.

• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.1-12
• /
• 2006

Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimator and maximum likelihood estimator for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.13-18
• /
• 2015

This paper proposes an optimum vision system analysis and a reliable high-precision positioning system that converges a GNSS and a vision system in order to resolve position error and outdoor shaded areas two disadvantages of GNSS. For location determination of the object, it should receive signal from at least four GNSS. However, in urban areas, exact location determination is difficult due to factors like high buildings, obstacles, and reflected waves. In order to deal with the above problem, a vision system was employed. First, determine an exact position value of a target object in urban areas whose environment is poor for a GNSS. Then, identify such target object by a vision system and its position error is corrected using such target object. A vehicle can identify such target object using a vision system while moving, make location data values, and revise location calculations, thereby resulting in reliable high precision location determination.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1109-1112
• /
• 2005

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. The optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.1
• /
• pp.18-25
• /
• 2002

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. the optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.559-563
• /
• 2010

The representation of color with natural dyes is closely related with the modern well-being life. This study is focused on the representation of target color of the blue, yellow, and red color system, these color sources were originated from the green tea, gardenia, and black rice respectively. The quantitative numerical value of brightness (L), color coordinates (a, b) were designated for the target color, the optimum color nearest to the target value was extracted with the solvent pH, temperature, and extraction time. The longer the extraction time had more thickening color in case of the gardenia. The L-a-b coordinate of extracted color were analyzed with the color difference meter and compared with the target color. The experimental variables were optimized to extract the color of the smallest ${\Delta}E$ with the target color. As a result, the CIE standard value was proposed and the color was represented.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1999

This paper considers the problem of determining the optimum target values of the quality characteristic of interest Y and the screening limits of a surrogate variable X which is correlated with Y under two-stage screening procedure. In the two-stage screening procedure, X is measured first to decide whether an item should be accepted, rejected or additional observations should be taken. If it is difficult to decide on the result of measured value of X, Y is then observed to classify the undecided items. Assuming that Y and X are jointly normally distributed, a model is constructed which involves selling and reduced prices, production, inspection, and penalty costs. Methods of finding the optimum process mean and the screening limits are presented. A numerical example and analysis of the results are also presented.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.379-384
• /
• 2005

In this research, coagulation was employed as the pretreatment for membrane process. The effective coagulation conditions were decided after the discussion of different coagulant doses and mixing conditions, etc. Raw water was taken from Nakdong River. The best operation occurred when G value was $230s^{-1}$ and the slow mixing lasted around 5 minutes at G value was $23s^{-1}$. To investigate the optimum coagulant dosage, the optimum organics removal was target as organic removal reduces membrane fouling effectively than particle removal. This result indicated that organics are more important causes than turbidity for membrane fouling. However, turbidity becomes an important factor after certain amount of organic matters is removed.