• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.250-256
• /
• 2005

This study was aimed to investigate treatment feasibility of leachate from D landfill that is located in gyr대ungbuk. From the analytical results of leachate, organic and nonbiodegradable matters were contained in high concentration. Thus chemical treatment was introduced to degrade nonbiodegradable matters in pre or post biological process. Two types of Fenton oxidation were adapted in this study. The first one is pre treatment process before biological treatment. The second one is post treatment process after biological treatment. The optimal conditions of both treatment methods were investigated as follows. In case of pre treatment process, the optimal conditions appeared in $Fe^{+2}/H_2O_2$(mmol/mmol): 0.1, $H_2O_2/CODcr$(mg/mg): 27.0, pH: 3 and reaction time: 2hrs. On the other hand, in case of post treatment process, the optimal conditions appeared in $Fe^{2+}$(mmol/mmol): 0.14, $H_2O_2/COD_{cr}$(mg/mg): 57.4, pH: 3 and reaction time: 1.25hrs. In the above optimal conditions, high COD removal was obtained in pre and post treatment process. Also it can expect that Fenton oxidation converted nonbiodegradable matters into biodegradable matters.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.4
• /
• pp.379-384
• /
• 2005

In general, water treatment sludge (WTS) had high concentration of heavy metal, thus it made the reuse or recycling of WTS difficult. The optimal solidification conditions for maximum suppression of heavy metal elution from WTS were decided in this study. Under the optimal solidification conditions (i.e., temperature, $320^{\circ}C;$ ratio of WTS and MgO, 9:1; solidification time, 1hr), all of heavy metal including aluminum were not detected. Therefore there are no problems for reuse or recycling of WTS which was solidified under the optimal solidification conditions found in the study.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.3
• /
• pp.219-224
• /
• 2001

This study was conducted to investigate the optimal conditions for the growth of soybean sprouts by ozone water watering. Optimal conditions for ozone water watering of soybean sprouts during cultivation at 2$0^{\circ}C$ were evaluated with ozone concentration(0.1~O.5 ppm) and watering frequency(1~9 times) by response surface methodology. The optimal conditions for growth of soybean sprouts were ozone concentrations of 0.20~0.32 ppm, ozone treatment frequency of 3.0~4.4 times. Germination rates, hypocotyl weights and hypocotyl lengths in the soybean sprouts cultivated under the optimal conditions increased by 13.3, 10.1 and 11.9%, respectively, whereas root weights decreased by 89.0%.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.61-61
• /
• 2022

For high quality bread wheat production in Korea, it is necessary to develop optimal nitrogen (N) fertilizer methods. For optimal N fertilizer, we evaluated the alteration of growth, yield, yield components and end-use qualities according to the treatment of N fertilizer amounts and timings at heading stages. Growth, yield, yield components, and end-use quality weren't altered by various timings of N fertilizer treatment conditions whereas, 1,000 grain weight and lodging degree was increased by increasing amounts of N fertilizer treatment conditions at 7 days after heading (7 DAH). Especially, lodging degree was significantly increased by 6kg/10a of N fertilizer treatment conditions at 7 DAH. The flour protein contents increased by various amounts of N fertilizer treatment conditions. However, SDS-sedimentation and bread loaf volumes were decreased by exceeding 6kg/10a of N fertilizer treatment conditions at 7 DAH. When considering the quality of bread, 6kg/10a N fertilizer treatment is best, but 3kg/10a N fertilizer treatment is more suitable for both quality and lodging at 7 DAH. Therefore, it is preferable to fertilize 3kg/10a of nitrogen at 7 DAH in addition to standard fertilizer when cultivate bread wheat.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.20-25
• /
• 2000

The wastewater treatment for the purpose of water-recycling was performed using Fenton's & ozone's methods. These methods were used to increase the treatment efficiency of textile wastewater and to search for the optimal operating conditions. The optimal conditions by Fenton process were determined so that input amounts of $FeSO_4{\cdot}7H_2O$ and $H_2O_2$ were $7.2mM/{\;}{\ell}$ and $49.0m/{\;}{\ell}$ respectively, treatment by ozone process had 92% removal efficiency at ozone concentration of 9.73g/min and $130mM/{\;}{\ell}$ of $H_2O_2$.

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.160-166
• /
• 2004

The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % KH$_2$PO$_4$, 0.05% The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % KH$_2$The optimal conditions for production of Monascus sp. KM100l cell mass on submerged culture and production of monacolin K on rice solid culture were investigated. An overproducing mutant of Monascus pigments, KM 1001 mutant, from Monascus purpureus KCCM60016 was selected by NTG treatment. The optimal medium for the production of KM100l mutant cell mass is instructed to be composed of 3% glucose, 2% yeast extract, 0.1 % $(KH_2PO_4$, 0.05% $MgSO_4{\cdot}7H_2O$, 0.2% L-asparagine, pH 4.5, and the optimal inoculum size and shaking speed were $1.5{\times}10^6$ spores/50 m1 medium and 150 rpm, respectively. On optimal conditions, 4.1 g/l of the cell mass was obtained at 28$^{\circ}C$ for 3 days. The mycelium were inoculated on 500 g of steamed rice using vinyl bag ($30.6{\times}44$ cm) and incubated at $30^{\circ}C$, 85% humidity for 21 days. Lactone form monacolin K was rapidly increased for 2 days and reached highest concentration of monacolin K (2,930 mg/kg) for 15 days, and monacolin K was decreased after 15 days.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.653-662
• /
• 2012

This study measured the effect of general pre-treatment on PLA fabrics to confirm the benefits of enzymatic processing on PLA fabrics in the textile industry as well as evaluated the hydrolytic activities of three lipases. The effects of lipase hydrolysis were analyzed through moisture regain, dyeing ability, tensile strength, and surface morphology. As a result, PLA fibers were easily damaged by a low concentration of sodium hydroxide and a low treatment temperature. The optimal treatment conditions of Lipase from Candida cylindracea were pH 8.0, $40^{\circ}C$, and 1,000 U. The optimal treatment conditions for Lipase from Candida rugosa were pH 7.2, $37^{\circ}C$, and 1,000 U. The optimal treatment conditions for Lipase from Porcine pancreas were pH 8.0, $37^{\circ}C$, and 2,000 U. The moisture regain and dyeing ability of PLA fabrics increased and the tensile strength of PLA fabrics decreased. The results of surface morphology revealed that there were some cracks due to hydrolysis on the surface of the fiber.

• Journal of Environmental Health Sciences
• /
• v.37 no.2
• /
• pp.159-164
• /
• 2011

We describe a method for effectively pretreating soil highly that has been contaminated with fluorene (${\gg}$ 120 mg/kg soil), i.e., we apply Fenton oxidation in which ethanol is added to increase fluorene removal. To obtain maximum fluorene removal efficiency, a minimum of 1.0 ml of ethanol, 0.35 ml of $H_2O_2$, and 0.2 ml of 0.5M $Fe^{2+}$ was needed per 1 g of fluorene-contaminated soil. Under optimal Fenton oxidation conditions, 13% of 9-fluorene was generated during Fenton oxidation of 43% fluorene. The biodegradability of 9-fluorenone was subsequently confirmed to be much more rapid than that of fluorene, i.e., biodegradability of 96% versus 35% over 31 days. These results demonstrate that the proposed treatment method can be effectively applied to remove fluorene prior to disposal at industrial waste sites.

• Journal of Animal Science and Technology
• /
• v.55 no.6
• /
• pp.545-549
• /
• 2013

The optimal conditions for applications of an atmospheric pressure plasma (APP) jet for the inactivation of Salmonella Typhimurium in chicken breast and pork loins were investigated. APP jet treatment for 10 min (versus 5 minutes) showed a higher inactivation of S. Typhimurium in an agar plate, with the best effect at a distance of 20 mm. A treatment on both sides (both-side treatment) for 2.5 + 2.5 min showed a greater inhibition on S. Typhimurium growth compared to single-side treatment for 5 min, with reduction levels of 0.66 log CFU/g in chicken breast and 1.33 log CFU/g in pork loin, respectively. However, there was no significant difference between single-side treatment for 10 min and both-side treatment for 5 + 5 min in chicken breasts and pork loin samples. In conclusion, APP jet treatment conditions, including distance, time, and direction, may affect the inactivation efficiency of S. Typhimurium. In this experiment, distance of 20 mm and both-side treatment were the best conditions. Therefore, the optimal APP jet treatment conditions were evaluated to maximize its practical efficiency.

• Applied Biological Chemistry
• /
• v.37 no.4
• /
• pp.295-302
• /
• 1994

For the development of biological wastewater treatment process using photosynthetic bacteria (PSB), photosynthetic sludge process consisted of anaerobic digestion and PSB reactor were designed for the treatment of swine wastewater and the optimal operating conditions in flask-scale were examined. Photosynthetic bacteria from soil, pond, rice field, ditch etc. were isolated in synthetic medium containing high amount of organic acids and finally isolated one strain KK14 which showed the most degradating ability of organic acids was selected for the treatment of swine wastewater. It was identified as Rhodopseudomonas palustris. In the anaerobic digestion stage, the maximum organic acid productivity was obtained at pH 5.0, $37^{\circ}C$, HRT 2 day and under anaerobic standing condition. The optimal operating conditions of PSB reactor for the treatment of swine wastewater were pH 7.0, $30^{\circ}C$ under 4,000 lux illumination, and optimal initial COD loading (kg COD/kg D. C. W of PSB) was 2 (20% v/v seeding) in the main purification stage. Maximum removal rate of COD reached 92% under the above optimal conditions for 5 days.