• Journal of the Korean Statistical Society
• /
• 제31권1호
• /
• pp.33-43
• /
• 2002

The empirical Bayes linear loss two-action problem is studied. An empirical Bayes test $\delta$$_{n}$ $^{*}$ is proposed. It is shown that $\delta$$_{n}$ $^{*}$ is asymptotically optimal in the sense that its regret converges to zero at a rate $n^{-1}$ over a class of priors and the rate $n^{-1}$ is the optimal rate of convergence of empirical Bayes tests.sts.

• 대한산업공학회지
• /
• 제21권4호
• /
• pp.507-517
• /
• 1995

The failure rate of an item depends on operational environment. When an item has a chance failure period and a wearout failure period in sequel, the severity of operational environment causes the increase in the slop of wearout failure rate or the increase in the magnitude of chance failure rate. For such a change of operational environment, this paper concerns the change of optimal preventive replacement time. Two preventive replacement policies, age replacement policy and periodic replacement policy with minimal repair, are considered. Investigated properties are: (a) in age replacement policy, optimal preventive replacement time increases as the chance failure rate increases and optimal preventive replacement time decreases as the slope of wearout failure rate increases, and (b) in periodic replacement policy with minimal repair, optimal preventive replacement time increases as the slope of wearout failure rate increases; however, the change of chance failure rate does not alter the optimal preventive replacement time.

• 품질경영학회지
• /
• 제31권3호
• /
• pp.193-204
• /
• 2003

In this paper, we consider a periodic preventive maintenance(PM) policy in which each PM reduces the hazard rate but remains the pattern of hazard rate unchanged. And the system undergoes only minimal repairs at failures between PM's. The expected cost rate per unit time is obtained. The optimal number N of PM and the optimal period x, which minimize the expected cost rate per unit time are discussed. Explicit solutions for the optimal periodic PM are given for the Weibull distribution case.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.204-207
• /
• 2001

An optimization process for the design of groundwater remediation is developed by simultaneously considering the well location and the pumping rate. This process uses two independent models: simulation and optimization model. Groundwater flow and contaminant transport are simulated with MODFLOW and MT3D in simulation model. In optimization model, the location and pumping rate of each well are determined and evaluated by the genetic algorithm. In a homogeneous and symmetric domain, the developed model is tested using sequential pairs for pumping rate of each well, and the model gives more improved result than the model using sequential pairs. In application cases, the suggested optimal design shows that the main location of wells is on the centerline of contaminate distribution. The resulting optimal design also shows that the well with maximum pumping rate is replaced with the further one from the contaminant source along flow direction and that the optimal pumping rate declines when more cleanup time is given. But the optimal pumping rate is not linearly proportional to the cleanup time and the minimum total pumping volume does not coincide with the optimal pumping rate.

• 대한설비공학회지:설비저널
• /
• 제12권1호
• /
• pp.2-11
• /
• 1983

The solar energy retention rate of a flat plate collector can be increased by increasing water flow rate through the collector which also increases the pumping energy incurred in obtaining that solar energy. The problem of optimal flow rate is formulated to fit within the framework of pontryagin's maximum principle and with a few simplifying assumptions, an optimal solution that can be easily implemented is obtaincd, The optimal solution is used in the simulation of a solar heating system using actual climatological data and the results are compared with that of on-off control. The result that not only the object function but, In some cases, also the solar energy retention rate the collector is increased. In is also found that the optimal control gets more advantageous as the solar insolation level gets lower, and also as tile cost of auxiliary heating fuel gets higher.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 추계학술대회
• /
• pp.188-191
• /
• 2010

The study investigated the optimal configuration of SVC (Scalable Video Coding) to apply to the satellite broadcasting service, and compared the performance of the SVC with that of the AVC (Advanced Video Coding). To get the optimal configuration, we analyzed the optimal bit rate allocation between the layers and the optimal scalability which requires the least bit rate for the required PSNR for various kinds of contents using JSVM. As a result of investigation, we found that the optimal bit rate allocation occurs when the bit rate of the base layer is minimum, and the spatial scalability shows the best performance. The performance of SVC is similar to that of AVC for spatial scalability, but it depends on contents.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.65-75
• /
• 2005

In this paper, we consider a scenario in which the source has been offered QoS guarantees subject to token-bucket regulation. The rate of the source should be controlled such that it conforms to the token-bucket regulation, and also the distortion obtained is the minimum. We have developed an optimal scheduling algorithm for offline (like pre-recorded video) sources with convex distortion function and which can not tolerate any delay. This optimal offline algorithm has been extended for the real-time online source by predicting the number of packets that the source may send in future. The performance of the online scheduler is not substantially degraded as compared to that of the optimal offline scheduler. A sub-optimal offline algorithm has also been developed to reduce the computational complexity and it is shown to perform very well. We later consider the case where the source can tolerate a fixed amount of delay and derive optimal offline algorithm for such traffic source.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권5호
• /
• pp.366-377
• /
• 2005

본 논문은 한국어 철자교정기의 최적교정률을 보이는 모듈들의 나열순서를 찾는 연구이다. 철자교정기의 모듈 개수가 n개이면 모듈나열 경우의 수는 n!가지가 가능하므로 철자교정기의 최적 교정률을 계산하기가 힘들어 진다. 실험에 사용한 한국어 철자교정기는 현재 19개 모듈들로 구성되어 있다. 입력데이타에 대해서 19!개 모듈을 적용하여 최적교정률을 찾는 것은 현실적으로 불가능하다. 따라서 주어진 입력데이타에 대해 이론적인 최대교정률과 최소교정률을 구하여 교정률 범위를 구하고, 최대교정률에 근접한 최적교정률에 대한 모듈나열순서를 구하는 것이 논문의 목적이다. 최적교정률을 구하기 위해 경험적 지식을 사용하였다. 실험에 사용한 입력데이타는 신문사에서 몇 년간 발생한 오류어절 753,191개의 집합이다. 이 오류집합에 대해 철자교정기의 이론적인 최대교정률은 $97.28\%$ (732,764개/753,191개)이나 경험적으로 우리가 찾은 최적교정률은 $96.62\%$ (727,750개 /733,191개)이다. 철자교정기의 성능은 $99.31\%$ (727,750개 /732,764개)이다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.503-508
• /
• 2004

Optimal remediation design using the pump and treat(P&T) method and natural attenuation was accomplished in consideration for degradation processes, such as sorption and first-order decay rate. Variation of both sorption and first-order decay rate has influence on design of optimal remediation application. When sorption effect increases, the more pumping rate and pumping wells are required. The location of operated wells is on the centerline of contaminant plume and wells near hot spot are mainly operated when sorption effect increases. The higher of first-order decay rate, the less pumping rate is required. These results show that the degradation processes have to be considered as one of the essential factors for optimal remediation design.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.121-129
• /
• 2005

In this paper, we consider a periodic preventive maintenance(PM) policy in which each PM reduces the hazard rate of amount proportional to the failure intensity, which increases since the last PM and slows down the wear-out speed to that of new one. And the proportion of reduction in hazard rate decreases with the number of PMs. Our model is similar to $ARI_1$ proposed by Doyen and Gaudoin(2004) in the sense of reduction of hazard rate. Our model has totally different wear-out pattern of hazard rate after PM's, however, and the proportion of reduction depends on the number of PM's. Assuming that the system undergoes only minimal repairs at failures between PM's, the expected cost rate per unit time is obtained. The optimal number N of PM and the optimal period x, which minimize the expected cost rate per unit time are discussed. Explicit solutions for the optimal periodic PM are given for the Weibull distribution case.