• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.33-35
• /
• 2002

This paper proposes the optimal design method to reduce the cogging torque of the interior permanent magnet motor using the design of experiment. The slot opening. tooth tips and the pole arc/pole pitch are chosen as factors of the design of experiment in order to find optimal conditions of the interior permanent magnet motor. Finally, the cogging torque of the optimized motor compares with that of the original motor.

• 전기전자학회논문지
• /
• 제13권3호
• /
• pp.24-31
• /
• 2009

The computation time of FEA(finite element analysis) for one model may range from a few seconds up to several hours according to the complexity of the simulated model. If these FEA is used to calculate the objective and the constraint functions during the optimal solution search, it causes very excessive execution time. To resolve this problem, the distributed computing technique using internet web service is proposed in this paper. And the dynamic load balancing mechanisms are established to advance the performance of distributed computing. To verify its validity, this method is applied to a traditional mathematical optimization problem. And the proposed FEA-based optimization using internet distributed computing is applied to the optimal design of the permanent magnet dc motor(PMDCM) for automotive application.

• Journal of Power Electronics
• /
• 제4권4호
• /
• pp.228-236
• /
• 2004

This paper describes the optimal current-control of a permanent magnet synchronous motor by the use of robust and simple current controllers, based upon the analytical procedure known as the inverse LQ (ILQ) design method. The ILQ design method is a strategy for finding the optimal gains based on pole assignment without solving the Riccati equation. It is very important to keep the motor in robust servo-lock. By experiments and simulations, we will show that the ILQ optimal servo-system with servo-lock is more insensitive at low speeds to variations in armature inductance than the standard PI servo-system. Variations in armature inductance have the greatest influence on the responses of a servo-system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.126-129
• /
• 1991

The effect of each tooth for optimal design of Hybrid permanent magnet step motor is presented on this paper. For this consideration, Hybrid permanent magnet step motor was designed in the first consideration tooth structure on the stator and the rotor and poles structure, as number of teeth on the stator and the rotor and slot depth and pitch of teeth, simulated by AutoLISP. During actual rotating, a chracteristic of Hybrid permanent magnet step motor which designed by AutoLISP program is considered. A chracteristic of Hybrid permanent magnet step motor is considered in change each variable, also. As a result, it was found that characteristic of Hybrid permanent magnet step motor changed in accordance with tooth structure and number of teeth and optimal design is possible by AutoLISP.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.84-89
• /
• 2003

The finite element method (FEM) is typically used in the process of motor design. However, the FEM requires computation time, Therefore, decreasing the number of FEM simulations may also decrease the simulation cost. Several optimal design methods overcoming this problem have been recently studied. This paper investigates the optimal design of the magnet pole of a BLDC motor through reducing simulation cost. The optimization minimizes the magnet volume and limits the average and cogging torques to certain values. In this paper, the response surface methodology and Taguchi's table for reducing the number of FEM simulations are used to approximate two constraints. The optimization result shows that the presented strategy is satisfactorily performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.649-650
• /
• 2006

In this paper, finite element analysis (FEA)-based optimization using Internet distributed computing is proposed for the real world and complex optimization such as optimal design of permanent magnet do motor (PMDCM).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.869_870
• /
• 2009

This paper presents optimal design of tooth and yoke width for increasing torque density when designing concentrated winding Interior Permanent Magnet Synchronous Motor(IPMSM) which is used currently. In case of IPM, characteristic of motor chages according to saturation, thus design consib dering saturation should be done. This paper proposed method to decide tooth and yoke width using magnetic equivalent circuit with calculated magnetic resistance. This method provide less effort and time than FEM using optimal design when deciding tooth and yoke width. Proposed method and FEM are compared and verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.895-897
• /
• 2001

It must be able to calculate thrust to design and manufacture linear BLDC motor by required specification. If magnetic energy with respect to displacement of mover of linear BLDC electric motor be obtained, thrust can be calculated. It can decide optimal design factor of linear BLDC motor through change of thrust by design variable using magnetic energy method. It can predict variation of thrust by pitch of pole and design optimally using coenergy that is attained from FEM.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권7호
• /
• pp.329-334
• /
• 2005

This paper presents the optimal design for reducing the rotor inertia in order to improve the driving characteristic of BLDC motor for robots. The parallel Genetic Algorithm is performed to rotor inertia minimization in optimal design. Also, velocity profile with finite jerk method is introduced to reduce vibration of BLDC motor. As a result, a torque characteristic is same although rotor inertia is reduced to 2/3 compared with prototype model. And, maximum vibration value is reduced by 63.4[$\%$] according to the application of finite .jerk method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.672_673
• /
• 2009

In this paper seeks the parameter which relates with the efficiency from premium efficiency level single-phase induction motor. Also it compares with the parameters and it analyzes and an optimum parameter it seeks by FEM. Consquently, a optimal design is accomplished from the this paper. Also parameters compare efficiency. And it analyzes and studies about optimum parameter by FEM. The sample single-phase induction motor selection selected existing premium level motor. We analyze each parameter using 2-D finite element analysis (FEM). According to Study of losses and Design flow, losses and efficiency can be explain by many parameter. So this paper present optimal parameters. Finally, this paper presents the method which raises the efficiency of premium efficiency level single-phase induction motor.