• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.82-85
• /
• 1995

Magnetic-electrolytic-abrasive polishign(MEAP) systemwas newly developed and the finishing characteristics of Cr-coated roller was analyzed. The paper describes the operational principle of MEAP system and magnetic field effect on the MEAP process by experimental results. The finishing characteristics and optimal finishing condition for Cr-coated roller were experimented and analyzed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.137-142
• /
• 1996

Magnetic-electrolytic-abrasive polishing system(MEAPS) was developed for machining national standard electrode and its finishing characteristics was analyzed. The paper describes the operational principle of MEAP system by experimental results. The finishing characteristics and optimal finishing condition for national standard electrodes were experimented and analyzed. As a result, MEAPS can improve straightness as well as surface roughness.

• International Journal of Reliability and Applications
• /
• 제17권1호
• /
• pp.85-105
• /
• 2016

In this paper accelerated life testing is incorporated in quality control technique of acceptance sampling plan to induce early failures in high reliability products.Stress under accelerated condition can be applied in constant-stress, step-stress and progressive-stress or combination of such loadings. A ramp-stress results when stress is increased linearly (from zero) with time. In this paper optimum failure-censored ramp-stress accelerated life test sampling plan for log-logistic distribution has been formulated with cost considerations. The log-logistic distribution has been found appropriate for insulating materials. The optimal plans consist in finding optimum sample size, sample proportion allocated to each stress, and stress rate factor such that producer's and consumer's interests are safeguarded. Variance optimality criterion is used when expected cost per lot is not taken into consideration, and bilevel programming approach is used in cost optimization problems. The methods developed have been illustrated using some numerical examples, and sensitivity analyses carried out in the context of ramp-stress ALTSP based on variable SSP for proportion nonconforming.

• 한국환경보건학회지
• /
• 제29권4호
• /
• pp.4-9
• /
• 2003

Biofiltration can effectively remove both organic and inorganic air pollution compounds from both industrial and public sources. However, for the optimal biofiltration performance, it is necessary to gain a better understanding of the inner environment and destruction mechanisms within a biofilter. The effects of operational factors on removal efficiency was studied. Generally, removal efficiency decreases as the loading rate increases. Temperature, as one of the key factors that affect biofiltration design and performance, was also investigated. Conceptually, the biofilter reactor of this paper was divided into five different consecutive stages. The more ethylbenzene COD degraded at each stage, the higher the temperature increases observed compared to the temperatures of the previous stages. It was observed that for every 1 kg of ethylbenzene COD degraded per cubic meter of biofilter media, there was generally a 0.41$^{\circ}C$ increase in the temperature of that stage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1756-1758
• /
• 1996

In order to optimize the operational characteristics of single elliptical pulsed Nd:YAG laser designed and fabricator compactly, it is very important to design the resonator shape and the PFN(Pulse Forming Network) suitably. We have been shown that the EMTP(Electro-Magnetic Transient Program) simulation. was used effectively in designing PFN. And Next, we have been compared current pulse width, laser beam profile and damping parameter with laser output energy. In this paper, we have suggested the optimalization of PFN design and the best operational condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.66-71
• /
• 2005

본 연구에서는 하이브리드 모터의 연소율 증진을 위해 두 가지 방법을 사용하여 연구하였다. 첫째로, 산화제 유입 시에 스월 유동을 적용하여 연소율 향상을 이룰 수 있도록 산화제 스월 인젝터를 적용하여 실험하였다. 둘째로 연소 면적 증대와 스월 유동을 유도하기 위하여 나사산 형상의 연료 그레인을 제작하여 연구하였으며 PMMA 고체 연료와 기체 산소가 사용하였다. 이전에 진행되었던 실험 결과를 바탕으로 새로운 실험결과를 분석하고, 각 방법의 문제점을 살펴보고 개선점을 연구하였다.

• 한국환경과학회지
• /
• 제31권4호
• /
• pp.295-309
• /
• 2022

The purpose of this study was to evaluate the operational characteristics of wastewater treatment using Sequencing Batch Reactor (SBR) with Aerobic Granular Sludge (AGS) separator in the pilot plant. Pilot plant experiments were conducted using SBR with AGS separator and pollution removal efficiencies were evaluated based on the operational condition and surface properties of AGS. The results of the operation on water quality of the effluent showed that the average concentration of total organic carbon, suspended solids, nitrogen, and phosphorus was 6.89 mg/L, 7.33 mg/L, 7.33 mg/L, and 0.2 mg/L, respectively. All these concentrations complied the effluent standard in Korea. The concentration of mixed liquor suspended solid (MLSS) fluctuated, but the AGS/MLSS ratio was constant at 86.5±1.3%. Although the AGS/MLSS ratio was constant, sludge volume index improved. These results suggested that the particle discharged fine sludge and increased the AGS praticle size in the AGS. Optical microscopy revealed the presence of dense AGS at the end of the operation, and particles of > 0.6 mm were found. Compared to those of belt-type AGS separator, the required area and power consumption of the hydrocyclone-type AGS separator were reduced by 27.5% and 83.8%, respectively.

• 한국미생물·생명공학회지
• /
• 제17권4호
• /
• pp.349-357
• /
• 1989

전분질을 당화시킬 때 유리구와 같은 분쇄마찰매체 (attrition-milling media)를 첨가하여 교반함으로써 생전분질 -효소 현탄액에 분쇄마찰효과를 주어 전분입자를 구조적으로 변화시켜 당화를 현저히 촉진시키는 적절한 무증자 당화법을 연구해오고 있다. 본 연구는 전분질의 무증자 당화에 적합한 고효율 및 저에너지 소모형 분쇄마찰매체 함유 효소반응기의 개발을 목포로, impeller를 갖춘 agitated bead type bloattritor를 설계 제작하여 그 효용성을 검토하였다. 무증자 옥수수전분을 기질로 당화에 적합한 bioattritor의 최적 조작조건을 검토하였고, 일정한 탄성계수를 지닌 spiral spring coil을 내장한 torque 측정장치를 개발하여 부하되는 torque 및 분쇄마찰 매체의 교반에 소요되는 energy를 측정하였고 중요 변수의 영향을 검토하였다. 또한 energy 소모와 생 전분의 효소당화 촉진효과와의 상관관계를 규명하였으며, bioattritor의 경제성을 전망하였다. 전분질의 최적 당화조건에서 분쇄마찰매체의 교반에 소요되는 동력은 1.53watt/ι로서 매우 적었다. 분쇄마찰매체 함유 효소반응계는 에너지 절약형 공정으로 사료되며, 이를 이용한 무증자 전분 효소당화공정의 산업적 활용 전망이 예상된다.

• 한국대기환경학회지
• /
• 제33권6호
• /
• pp.605-615
• /
• 2017

Efficient simultaneous reduction conditions for $NO_x$ and $NH_3$-slip was investigated in SCR (Selective Catalytic Reduction) process with load variation by applying dual catalysts (SCR catalyst, $NH_3$ decomposition catalyst) system. $N_2O$ formation characteristics were analyzed to look into possible undesirable reaction pathways. In the experiments of catalyst characteristics, various operational variables were tested for the combined catalytic system, such as $NH_3/NO_x$ ratio, temperature, oxygen concentration and $H_2O$. The reaction characteristics of $NO_x$, $NH_3$ and $N_2O$ were analyzed and optimal conditions could be evaluated for the combustion facility with varied load. In terms of $NO_x/NH_3$ simultaneous reduction and $N_2O$ formation suppression, optimal condition was considered NSR 1.2 and temperature $300^{\circ}C$. At this operational condition, $NO_x$ conversion was 98%, $NH_3$ reduction efficiency was 95%, generated $N_2O$ concentration 9.5 ppm with inlet $NO_x$ concentration of 100 ppm. In $NH_3-SCR$ process with $NH_3$ decomposition catalyst, $NO_x$ and $NH_3$ can be considered to be reduced simultaneously at limited conditions. The results of this study may be utilized as basic data at facilities requiring simultaneous $NO_x$ and $NH_3$ reduction for facilities with load variation.

• 한국국방경영분석학회지
• /
• 제17권1호
• /
• pp.61-83
• /
• 1991

There has been a great deal of research dealing with the optimal replacement of stochastically deteriorating equipment and research in queueing systems with a finite calling population. However. there has been a lack of research which combines these two areas to deal with optimal replacement for a fixed number of machines and a limited number of repairmen. In this research, an optimal control policy for replacement involving two machines and one repairman is developed by investigating a class of age replacement policies in the context of controlling a G/M/1 queueing system with a finite calling population. The control policy to be imposed on this problem is an age-dependent control policy, described by the control limit $t^{\ast}$. The control limit is operational only when the repairman is idle; that is. if both machines are working, as soon as a machine reaches the age $t^{\ast}$ it is taken out of service for replacememt. We obtain the ${\epsilon}$-optimal control age which will minimize the long-run average system cost. An algorithm is developed that is applicable to general failure time distributions and cost functions. The algorithm does not require the condition of unimodality for implementation.