• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.101-104
• /
• 2007

We propose a novel optical configuration for transmissive and reflective mode in the IPS LC cell to improve the viewing angle characteristics in a diagonal direction. The optical design was performed on a Poincar$\dot{e}$ sphere. From the calculation, we confirmed that the proposed configuration provides excellent viewing angle characteristics.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.280-287
• /
• 2015

Three-level PWM rectifiers applied in medium voltage applications usually operate at low switching frequency to keep the dynamic losses under permitted level. However, low switching frequency brings a heavy cross-coupling between the current components $i_d$ and $i_q$ with a poor dynamic system performance and a harmonic distortion in the grid-connecting current. To overcome these problems, a mathematical model based on complex variables of the three-level voltage source PWM rectifier is firstly established, and the reasons of above issues resulted from low switching frequency have been analyzed using modern control theory. Then, a novel control strategy suitable for the current decoupling control based on the complex variables for $i_d$ and $i_q$ is designed here. The comparisons between this kind of control strategy and the normal PI method have been carried out. MATLAB and experimental results are given in detail.

• Journal of Information Display
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2006

We propose optical configurations of a double-cellgap liquid crystal cell for transflective displays with wide viewing angle and high contrast ratio. The reflective part is designed in the wide-band quarter wave structure to achieve good dark state. For the transmissive part, the compensation method is applied to achieve the super-achromatic dark state, and three switching methods are used : which are vertical switching, horizontal switching to $30^{\circ}$and horizontal switching to $120^{\circ}$, to achieve the bright state.

• Journal of the Optical Society of Korea
• /
• v.5 no.2
• /
• pp.39-42
• /
• 2001

A new method of switching mode in AFLC cell is proposed for faster switching time and higher contrast ratio. In this mode the ″dark″ state is obtained by applying negative full voltage while the ″bright″ state is achieved by applying positive full voltage to the cell. The switching time is reduced to 100 $mutextrm{s}$ for the cell whose switching time is 22 ms when operated in conventional mode. The contrast ratio is also improved vastly with this method. The possibility of achieving gray scale was shown in this mode of operation.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.89-96
• /
• 1993

In this paper, an OPS(Optical Protection Socket) unit is designed and prototyped for the application in the optical CPN(Customer Premises Network). The OPS unit, which plays an important role in the CPN for the enhanced network reliability, is consisted of $1{\times}2$ optical fiber splitter, combiner, and $1{\times}1$ optical switch to be a hybrid-typed unit. Various considerations, about power burget and optical information loss have given the most practical design for OPS. From the measurement of the realized OPS unit, it has proved such as the pertinent switching delay time with minimum data loss, the perceptive ability on the ONU degradation, the switching ability on the ONU malfunction.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.119-122
• /
• 2006

We present an intelligent optical switching structure based on our lambda-group model along with a working scheme that can provide a distinctive approach for dividing complicated traffic into specific tunnels for better optical performance and grooming efficiency. Both the results and figures from our experiments show that the particular channel partition not only helps in reducing ports significantly, but also improves the average signal-to-noise ratio of the wavelength channel and the blocking performance for dynamic connection requests.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.55.1-55
• /
• 1998

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.1-6
• /
• 2006

We show for the first time the optical properties of the selectively oxidized vertical cavity laser (VCL) - depleted optical thyristor (DOT), which has not only a low threshold current, but also a high sensitivity to the optical input light. In order to analyze their switching characteristics, nonlinear s-shaped current-voltage characteristics are calculated and the reverse full-depletion voltages (Vneg's) are obtained as function of semiconductor parameters by using a finite difference method (FDM). The selectively oxidized PnpN VCL-DOT clearly shows the nonlinear s-shaped current-voltage and lasing characteristics. A switching voltage of 5.24 V, a holding voltage of 1.50 V, a spectral response at 854.5 nm, and a very low threshold current of 0.65 mA is measured, making these devices attractive for optical processing applications.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.220-221
• /
• 2003

We optimized the structure of a fully depleted optical thyristor (DOT) to achieve the faster switching speed and the lower power consumption by the depletion of charge at the lower negative voltage. The fabricated optical thyristor shows sufficient nonlinear s-shape I-V characteristics with the switching voltage of 2.85 V and the complete depletion voltage of -8.73 V. In this paper, using a finite difference method (FDM), we calculate the effects of parameters such as doping concentration and thickness of each layer to determine the optimized structure in the view of the fast and low-power-consuming operation.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.145-152
• /
• 1999

A new switch architecture is presented to enhance out-put queuing in photonic packet switches. Its appkication is for a packet switching enviroment based on the optical transport of fixed length packets. This architecture consists of a couple of cas-cading switching elements with output queuing, whose buffer ca-pacity is limited by photonic technology. The introduction of a suitable buffer management allows a very good and balanced ex-ploitation of the available optical memories, realized with fiber de-lay lines. In particular, packet loss performance is here evaluated showing the improvement with respect to the single switch and a way to design large optical switches is shown in order to meet broadband network requirements.