• 대한조선학회논문집
• /
• 제58권3호
• /
• pp.158-166
• /
• 2021

In this paper, a numerical analysis technique using a body force model is investigated to estimate the available net thrust of multi-pod-driven ice-breaking vessels under bollard pull and overload conditions. To employ the body force model in present flow simulations, drag and thrust components acting on the pod unit are calculated by using Propeller Open Water (POW) test data. The available net thrusts according to the direction of operation are evaluated in both bollard pull and overload conditions under deep water. The simulation results are compared with the model test data. The available net thrusts, calculated by the present analysis for ahead operating modes at 3~6 knots which are typical speeds of the target vessel in arctic field, are agreed well with the model test results. It is also found that the present result for astern operating mode appears approximately 6 % larger than the model test result. In addition, the available net thrusts are calculated under the both operating conditions accompanied by shallow water effects, and the main cause of the difference is studied. Based on the result of the present study, it is confirmed that the body force model can be applied to the performance evaluation of multi-pod propulsion system and the main engine selection in early design stage of the vessel.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.9-15
• /
• 2022

Discarded bio-wastes, such as seeds and rinds, cause environmental problems. Multiple studies have recycled bio-wastes as eco-friendly energy sources to solve these problems. This study uses bio-waste to fabricate a mandarin peel powder based triboelectric nanogenerator (MPP-TENG). The MPP-TENG is based on the contact separation mode. It generates an open-circuit voltage and short-circuit current of 156V and 2µA, respectively. In addition, MPP-TENG shows stable operation over continuous 3000s without any deviation in output. Also, the device exhibits maximum power density of 5.3㎼/cm² when connected to a resistance of 100MΩ. In an energy storage capacity test for 1000s, the MPP-TENG stores an energy of 171.6µJ in a 4.7µF capacitor. The MPP-TENG can power 9 blue LEDs and 54 green lettering LEDs. These results confirm that the MPP-TENG can provide a new avenue for eco-friendly energy harvesting device fabrication.

• 아태비즈니스연구
• /
• 제12권2호
• /
• pp.175-186
• /
• 2021

Purpose - This study intended to identify the effects of varied institutional systems and policies that regulate or define operations of enterprises upon the profitability of private enterprises through case analysis. Design/methodology/approach - The systems and differences in the institution and commodity distribution in Korea and Japan, which define the operation of the "Garak Wholesale Market" and "Ota Wholesale Market". We were examined in the presentthis study, and the statistical data pertinent to the trade volume and profitability of wholesale market corporations that substantially run both markets, were analyzed. Findings - The competition among the corporations that run the "Garak Wholesale Market" substantially is limited due to regulations over the mode of transaction and monopoly of trust thereby significantly higher level of profitability and safety are guaranteed. However, the institutional autonomy that enabled each distributor in the "Ota Wholesale Market" to compete with each other freely caused the distributors therein face difficulties in securing stable profits due to the relatively poor level of profitability resulted from the autonomy. Research implications or Originality - It seems the autonomy in commercial transaction in the "Garak Wholesale Market" in Korea needs to be secured to promote the competition of distributors therein through an amelioration of institutional systems and amendment of relevant laws that prescribe current management of various distributors/operators in the market.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.23-28
• /
• 2023

무선 스마트 유틸리티 네트워크 통신시스템에서는 비동기 저전력 MAC이 IEEE 802.15.4e에 의해 표준화되어 사용되고 있다. RIT(Receiver Initiated Transmission)라고 불리는 비동기 방식 MAC은 체크인터벌(RIT period)에 따라 지연시간과 전력소모가 크게 영향을 받는 특성이 있다. 체크인터벌 마다 수면에서 깨어나 자신이 수신할 데이터가 있는지 확인함으로써, 수신단 전력 소모는 획기적으로 줄일 수 있지만 송신단에서는 과도한 웨이크업 시퀀스(wakeup sequence)로 전력소모가 발생하는 단점을 가진다. 체크 인터벌을 짧게하여 과도한 웨이크업 시퀀스를 줄이면 너무 빈번한 웨이크업으로 수신단 전력 소모가 많아지게 된다. RIT 비동기식 MAC 기법에서 트래픽 부하와 체크인터벌의 운용에 따른 전력소모 성능을 분석하여 Wi-SUN 구축시 적용코자 한다.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.1-9
• /
• 1986

This is the third part of the four-part paper describing the development of a packet-switched computer communication network named the KORNET. In this paper we describe the design and implementation of the X.25 protocol connecting packet mode data terminal equipments(PDTE's) with data circuit terminating equipments(DCE's). In the KORNET, the X.25 protocol has been implemented on the line processing module-A(LPMA) of the network node processor(NNP). In the implementation of X.25, we have divided the software module according to the service function, and have determined the the rules that interact between the modules. Each layer protocol has been developed using the technique of the finite state machine. Before the actual coding of softwares, we hafve used formal software development tools based on the specification and description language (SDL) and program design languate (PDL) recommended by the CCITT. In addition, for the efficient operation of the X.25 protocol system we have analyzed the system performance and the service scheduling method of each module. The results will also be given.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.10-19
• /
• 1986

This is the last part of the four-part describing the development of a packet-switched computer communication network named the KORNET. In this paper we describe the design and implementation of the packet assembler/dissassembler (PAD) protocol for the asynchronous channel service, and of the network management softwares. The line processing module-B(LPMB) system supporting the asynchronous line includes a PAD protocol, a packet mode DTE/DCE protocol converting to the X.25 protocol, and the asynchronous receiver/transmitter(ART) software. The network management software is operated in master central processing module(MCPM) which includes virtual circuit management (VCM) managing the user channel, the routing management and the high level protocol for communication between the network management center (NMC) and the network node processor(NNP). In this paper, the design, implementation and operation of the softwares for the above service functions will be described in detail.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4134-4145
• /
• 2022

The collimator is one of the high-heat-flux components used to avoid a series of vacuum and thermal problems. In this paper, the heat load distribution throughout the collimator is first calculated through experimental data, and a transient thermodynamic simulation analysis of the original model is carried out. The error of the pipe outlet temperature between the simulated and experimental values is 1.632%, indicating that the simulation result is reliable. Second, the model is optimized to improve the heat transfer performance of the collimator, including the contact mode between the pipe and the flange, the pipe material and the addition of a twisted tape in the pipe. It is concluded that the convective heat transfer coefficient of the optimized model is increased by 15.381% and the maximum wall temperature is reduced by 16.415%; thus, the heat transfer capacity of the optimized model is effectively improved. Third, to adapt the long-pulse steady-state operation of the experimental advanced superconducting Tokamak (EAST) in the future, steady-state simulations of the original and optimized collimators are carried out. The results show that the maximum temperature of the optimized model is reduced by 37.864% compared with that of the original model. The optimized model was changed as little as possible to obtain a better heat exchange structure on the premise of ensuring the consumption of the same mass flow rate of water so that the collimator can adapt to operational environments with higher heat fluxes and long pulses in the future. These research methods also provide a reference for the future design of components under high-energy and long-pulse operational conditions.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.452-459
• /
• 2023

The core power control is an important issue for the study of dynamic characteristics in China initiative accelerator driven subcritical system (CiADS), which has direct impact on the control strategy and safety analysis process. The CiADS is an experimental facility that is only controlled by the proton beam intensity without considering the control rods in the current engineering design stage. In order to get the optimized operation scheme with the stable and reliable features, the variation of beam intensity using the continuous and periodic control approaches has been adopted, and the change of collimator and the adjusting of duty ratio have been proposed in the power control process. Considering the neutronics and the thermal-hydraulics characteristics in CiADS, the physical model for the core power control has been established by means of the point reactor kinetics method and the lumped parameter method. Moreover, the multi-inputs single-output (MISO) logical structure for the power control process has been constructed using proportional integral derivative (PID) controller, and the meta-heuristic algorithm has been employed to obtain the global optimized parameters for the stable running mode without producing large perturbations. Finally, the verification and validation of the control method have been tested based on the reference scenarios in considering the disturbances of spallation neutron source and inlet temperature respectively, where all the numerical results reveal that the optimization method has satisfactory performance in the CiADS core power control scenarios.

• 한국ITS학회 논문지
• /
• 제21권1호
• /
• pp.1-16
• /
• 2022

최근 환경에 대한 관심이 커지면서 전동킥보드는 도시 내 친환경 교통수단으로써 주목받고 있다. 이에 따라 실질적 이용행태 및 이용목적에 대한 다양한 연구가 실시되고 있으나, 개인의 통행성향을 반영한 이용의향에 대한 연구는 미비한 실정이다. 따라서, 본 연구에서는 서울시 통근자를 대상으로 실시한 설문조사를 활용하여 요인분석을 통해 응답자의 통행성향을 분석하고, 공유 전동킥보드 이용의향에 대한 이항 로지스틱 회귀모형을 구축하여 개인의 통행행태가 어떻게 영향을 미치는지 규명하였다. 모형추정 결과, 공유 전동킥보드 이용의향에 영향을 미치는 요인으로, 연령, 주수단(승용차), 버스정류장 접근시간, 통행성향 변수(통행 비효용, 직접 운전, 인터넷/스마트폰 친화, 추가 지불 의사)가 통계적으로 유의한 것으로 분석되었다. 본 연구의 결과는 향후 공유 전동킥보드의 효율적인 운영과 이용 활성화를 위한 통행행태적 측면의 기초자료로 활용될 수 있을 것으로 기대된다.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.683-686
• /
• 2023

본 논문에서는 차량 전자 시스템에서 소프트 에러와 공통 고장에 대응하기 위해 두 개의 코어를 지연 동작시킨 후 그 결과를 비교하는 D-DCLS(Delayed Dual Core Lock-Step) 프로세서를 설계하였다. D-DCLS는 어느 코어에서 에러가 발생했는지 알 수 없기 때문에 각 코어를 에러가 발생하기 이전 시점으로 되돌려야 하는데 파이프라인 스테이지 상의 모든 중간 계산값을 되돌리기 위해서는 복잡한 하드웨어 수정이 필요하다. 본 논문에서는 이를 쉽게 구현하기 위해 분기 명령어가 실행될 때마다 모든 레지스터 값을 버퍼에 저장해 두었다가 에러가 발생하면 저장된 레지스터 값을 복구한 후 'BX LR' 명령어를 수행하여 해당 분기 시점으로 자동 복구하도록 하였다. 제안하는 D-DCLS 프로세서를 Verilog HDL로 설계하여 에러가 감지되었을 때 자동으로 복구한 후 정상 동작하는 것을 확인하였다.