• 제목/요약/키워드: Open Cell

검색결과 1,059건 처리시간 0.037초

개방셀 세라믹스의 압축강도에 대한 제조공정변수 및 미세구조의 영향 (Effects of Fabrication Variables and Microstructures on the Compressive Strength of Open Cell Ceramics)

  • 정한남;현상훈
    • 한국세라믹학회지
    • /
    • 제36권9호
    • /
    • pp.954-964
    • /
    • 1999
  • The effect of fabrication variables and microstructures on the compressive strength of open cell alumina zirconia and silicon nitride ceramics fabricated by polymeric sponge method was investigated. Bulk density and compressive strength of open cell ceramics were mainly affected by coating characteristics of ceramic slurry on polymeric sponge that controlled a shape thickness and defect of the struts. Sintering temperature was optimized for enhancement of strut strength and compressive strength of open cell ceramics. Relative density and compressive strength behaviors were relatively well matched with the predicted values. Open cell ceramics of lower relative density below 0.1 prepared by first relatively well matched with the predicted values. Open cell ceramics of lower relative density below 0.1 prepared by first coating of ceramic slurry had thin triangular prismatic struts that were often broken or longitudinally cracked. With an application of second coating of slurry shape of struts was transformed into thickner cylindrical one and defects in struts were healed but the relative density increased over 0.2 Open cell zirconia had both the highest bulk density and compressive strength and alumina had the lowest compressive strength while silicon nitrides showed relatively high compressive strength and the lowest density. Based upon the analysis open cell silicon nitride was expected to be one of potential structural ceramics with light weight.

  • PDF

공동골격을 가진 개방셀 세라믹스의 상대밀도와 압축강도 모델 (Models for Relative Density and Compressive Strength of Open-Cell Ceramics with Hollow Struts)

  • 정한남;현상훈
    • 한국세라믹학회지
    • /
    • 제34권11호
    • /
    • pp.1139-1150
    • /
    • 1997
  • A model for predicting the relative density and the compressive strength of open-cell ceramics with three-dimensional network structure was proposed through the interpretation of their macrostructure and fracture mechanics. The equation predicting the relative density was derived under the assumption that the open-cell structure was a periodic array of the tetrakaidecahedron unit cell consisting of cylindrical struts containing the internal hollow with the shape of a triangular prism. The model for compressive strength of open-cell ceramics with the hollow strut was also developed by modifying conventional model which based on fracture behavior of them subjected to the compressive stress. Both the relative density and the compressive strength were expressed in terms of the ratio of the strut diameter to the length together with the ratio of the hollow size to the strut diameter. The proposed model for the relative density and the compressive strength of the alumina-zirconia composite with open-cell structure were accorded well with the experimental values, whereas Gibson-Ashby and Zhang's model did not show such a good agreement.

  • PDF

액화질소를 이용한 오픈 셀 실리콘 폼의 냉동 절삭조건 최적화 (Cryogenic Machining of Open-Cell Silicone Foam)

  • 황지홍;조광희;박민수
    • 한국생산제조학회지
    • /
    • 제23권1호
    • /
    • pp.32-37
    • /
    • 2014
  • Open-cell silicon foam is difficult to cut using conventional machining processes because of its low stiffness. That is, open-cell silicon foam is easily pressed down when the tool is engaged, which makes it difficult to remove the material in the form of chip. This study proposes an advanced method of machining open-cell silicon foam by freezing the material using liquid nitrogen. Furthermore, the machining conditions are optimized to maximize the efficiency of material removal and minimize the usage of liquid nitrogen by conducting experiments under various machining conditions. The results show that open-cell silicone foam products with free surface can be successfully machined by employing the proposed method.

Effect of the Holding Temperature and Vacuum Pressure for the Open Cell Mg Alloy Foams

  • Yue, Xue-Zheng;Hur, Bo-Young
    • 한국재료학회지
    • /
    • 제22권6호
    • /
    • pp.309-315
    • /
    • 2012
  • Metal foam has many excellent properties, such as light weight, incombustibility, good thermal insulation, sound absorption, energy absorption, and environmental friendliness. It has two types of macrostructure, a closed-cell foam with sealed pores and an open-cell foam with open pores. The open-cell foam has a complex macrostructure consisting of an interconnected network. It can be exploited as a degradable biomaterial and a heat exchanger material. In this paper, open cell Mg alloy foams have been produced by infiltrating molten Mg alloy into porous pre-forms, where granules facilitate porous material. The granules have suitable strength and excellent thermal stability. They are also inexpensive and easily move out from open-cell foamed Mg-Al alloy materials. When the melt casting process used an inert gas, the molten magnesium igniting is resolved easily. The effects of the preheating temperature of the filler particle mould, negative pressure, and granule size on the fluidity of the open cell Mg alloy foam were investigated. With the increased infiltration pressure, preheat temperature and granule sizes during casting process, the molten AZ31 alloy was high fluidity. The optimum casting temperature, preheating temperature of the filler particle mould, and negative pressure were $750^{\circ}C$, $400-500^{\circ}C$, and 5000-6000 Pa, respectively, At these conditions the AZ31 alloy had good fluidity and castability with the longest infiltration length, fewer defects, and a uniform pore structure.

무공케이슨 방파제의 원호활동에 대한 신뢰성 분석 (Reliability Analysis of Open Cell Caisson Breakwater Against Circular Slip Failure)

  • 김성환;허정원;김동욱
    • 한국지반신소재학회논문집
    • /
    • 제18권4호
    • /
    • pp.193-204
    • /
    • 2019
  • 본 연구에서는 국내 16개의 무공케이슨 방파제 설계자료를 이용하여 원호활동에 대한 신뢰성분석을 통하여 신뢰성 수준을 분석하였다. 신뢰성 분석을 위하여 지반의 강도 및 단위중량, 피복재와 상치구조물의 단위중량, 상치구조물 상부에 재하되는 하중의 불확실성을 결정하였다. 해석변수의 불확실성을 반영하여 임의로 재현된 무공케이슨 방파제 물성에 대하여 Bishop 간편법을 이용하여 하중 및 저항을 산정하였다. 충분히 많은 회수의 무공케이슨 방파제에 대한 해석을 Monte Carlo Simulation으로 수행하였고, 모든 해석 케이스에 도출된 하중과 저항 값을 수집하여 통계분석을 하였다. Monte Carlo Simulation으로부터 도출되는 파괴확률이 아주 낮은 경우가 파괴확률의 수렴 문제가 발생하여 하중과 저항의 통계특성을 반영하여 FORM(First-Order Reliability Method) 해석을 통해 신뢰수준을 평가하였다. 무공케이슨 방파제의 안전율, 하중 및 저항의 불확실성, 하중 및 저항의 상관성이 신뢰수준에 미치는 영향을 분석하였다.

지능에이전트를 이용한 개방형 셀 제어기 개발 (Intelligent Agent-based Open Architecture Cell Controller)

  • 황지현;최경현;이석희
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.393-397
    • /
    • 2001
  • This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.

  • PDF

실리콘 정포제의 종류에 따른 폴리우레탄 폼 지수제의 내수성 특성에 관한 연구 (Studies on the Water Resistance Properties of the Polyurethane Foam Silicone Foal Control Agent according to the Type of Silicone Foam Stabilizer)

  • 김근허;김현민;김성래;김영근
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제20권2호
    • /
    • pp.60-66
    • /
    • 2016
  • 본 연구는 실리콘계 정포제의 특성에 따른 폴리우레탄 폼 지수제의 cell 구조와 흡수량 변화를 알아보기 위하여 6종의 정포제를 사용하여 폴리우레탄 폼 지수제를 제조하여 FE-SEM으로 분석한 결과 실리콘 정포제의 실록산 주사슬 말단에 PO n개가 결합되어 있는 DC-193, DC-2585, DC-5125, DC-198의 cell 구조는 close cell로 확인이 되었고, 실리콘 정포제의 실록산 주사슬 말단에 EO n개가 결합 되어 있는 DC-5043과 DC-5598은 open cell 구조로 나타났다. 또한 cell 구조 변화에 따른 흡수량 에서는 close cell의 크기가 가장 세밀하고 균일한 DC-193의 흡수량이 가장 적게 나타나 내수성이 가장 우수한 것으로 나타났으며 open cell의 크기가 가장 크게 형성된 DC-5043의 흡수량이 가장 많은 것으로 나타났다. 이들의 방수성능을 콘크리트 구조물을 모사하여 시험한 결과 누수가 없음을 확인하였다.

판이 부착된 개포형 발포 알루미늄의 인장특성 (Tensile Properties of Plate Attached Open Cell Aluminium Foams)

  • 강복현;부성덕;김기영
    • 한국주조공학회지
    • /
    • 제27권2호
    • /
    • pp.83-87
    • /
    • 2007
  • Aluminum plates of the same materials as the foam were attached by the casting process inserting the foam as a core to investigate the tensile property of open cell foams. Tensile properties of the open cell 6063 aluminum alloy foam of $10{\sim}30$ PPI were measured before and after heat treatment. Densities of test specimens were between 0.14 and $0.29g/cm^3$. Tensile strength of the 6063 aluminum foam after heat treatment showed little change. C values were in the range of $0.41{\sim}0.87$ for as cast foams and $0.11{\sim}0.27$ for T6 heat treated foams in the eq. of ${\sigma}^* _{pl}/{\sigma}_{ys}=C({\rho}/{\rho}_s)^{1.5}$, and increased with increase in the cell size.

고탄성 폴리우레탄 발포체의 기포개방 I. 폴리에테르형 기포개방제의 농도 영향 (Cell Opening of High Resilience Polyurethane Foam I. Concentration Effect of Polyether Type Cell Opener)

  • 송기천;이상목;이동호
    • 폴리머
    • /
    • 제25권5호
    • /
    • pp.679-690
    • /
    • 2001
  • 폴리에테르형 기포개방제를 사용한 고탄성 폴리우레탄 발포체의 제조에서 기포개방제의 농도변화가 계의 반응속도, 유변학적 성질, 발포체의 구조적인 안정성, 형태학적 성질 및 개방기포의 함량 등에 미치는 영향을 조사하고 이를 통하여 기포개방에서 기포개방제의 역할을 알아보았다. 또한 기포개방제의 농도에 따른 발포체의 기계적 물성을 관찰하였다. 기포개방제의 높은 친수성으로 인해 우레아 생성반응이 지연됨을 관찰하였다. 유변학적 성질의 관찰을 통하여 기고개방제의 농도 증가에 따라 계의 점도저하와 tan $\delta$의 증가를 확인하였고 이로 인해 얻어진 발포체는 낮은 구조적인 안정성과 높은 개방기포 함량을 나타내었다. 기포개방제의 농도 증가에 따라 matrix의 파괴와 matrix내 수소결합된 우레아의 고른 분산을 발포체의 형태학적 성질의 관찰로 확인할 수 있었다. 결론적으로 고탄성 폴리우레탄 발포체의 제조시 기포개방제의 높은 친수성에 기인하여 matrix의 탄성특성 저하가 일어나고 이로 인해 높은 개랑기포 함량을 가진 발포체가 형성됨을 알 수 있었다. 발포체의 경도, 인장강도, 인열강도, 신율 등은 기포개방제의 농도 증가에 따라 저하하였다.

  • PDF

Cathode에 따른 휴대용 PEM 연료전지의 성능 변화 (Performance of the PEMFC for the mobile devices according to cathode)

  • 이세원;이강인;박민수;주종남
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 춘계학술대회 논문집
    • /
    • pp.550-553
    • /
    • 2008
  • In this paper, experiments of air-breathing proton exchange membrane fuel cell (PEMFC) for mobile devices were carried out according to the cathode conditions. These conditions are defined by the cathode flow field plate type (the channel type, the open type) and the cathode surface direction. Single cell and 6-cell stack were used in this experiments. The experimental results showed that the open type cathode flow field plate gave better performance for small size PEMFCs because the open type cathode plate allowed better air convection than the channel type cathode plate. In the experiments related to the direction of the slits on the cathode flow field plate, the horizontal slit cell was better than the vertical slit cell. With respect to the cathode surface direction, when the cathode surface is placed in the direction normal to the ground, PEMFC generated more stable power in the mass transport loss region.

  • PDF