• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.227-230
• /
• 2006

Recently, housing market & circumstances considering society change have changed dramatically. Such changes have affected system exchange of apartment housing greatly and promoted new housing system breaking with bearing wall structure. From this point of view, this study examined ultimate systematic items for promoting better housing system after extracting existing building regulation and housing regulation. This study only analyzed system change considering skeleton(support) with housing regulation, building regulation and fire service law. Consequently, apartment housing will intend residential open building breaking with existing bearing wall structure by promoting change of skeleton & infill system afterward.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.169-176
• /
• 2005

Many RC building structures of multiple uses constructed in Korea have the irregularities of torsion and soft story at bottom stories. A typical irregular building was selected as prototype and shaking table tests were performed to investigate the seismic performance of this building. The objective of this study is to evaluate the correlation between the experimental and analytical responses of this irregular building structure subjected to the earthquake excitation by using OpenSees(Open System for Earthquake Engineering Simulation). The results of analyses simulate well the effect of axial forces on the shear force of column and axial deformation. However, some discrepancy between analytical and experimental results in the distribution of shear forces and overturning deformation were observed.

• 한국CDE학회논문집
• /
• 제15권6호
• /
• pp.467-475
• /
• 2010

Due to the needs of design optimization and productivity for modernized Korean traditional house, standardization of Korean traditional building components is proceeding by BIM (Building Information Modeling). Currently, most of BIM software support object-based parametric modeling. By means of parameterized Korean traditional building components, the shape and assembly relation can be controlled. Although IFC(ISO/PAS 16739), which is an international standard in the AEC field, has been developed for information exchange among BIM software, IFC and other existing common data formats cannot be exchangeable parametric information. For the exchangeable parametric information within IFC, the authors defined meta-data by using Pset(Property-Set). The authors analyzed results about interoperability test in Revit $Architecture^{TM}$, $ArchiCAD^{TM}$ and Digital $Project^{TM}$. In order to solve found problems, the authors developed a translator to improve interoperability among BIM software.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 하계학술발표대회
• /
• pp.26-26
• /
• 2005

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.355-361
• /
• 2002

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires open network with for the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS, a new intelligent control modules with LonTalk protocol and a new control modules for power line communication. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation sub-systems and another BAS with low cost. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• 국제초고층학회논문집
• /
• 제8권3호
• /
• pp.229-234
• /
• 2019

This report introduces the structural design of Hibiya Mitsui Tower built in Tokyo Midtown Hibiya. The upper part of this tower is used for offices and the lower portion is for commercial facilities and a cinema complex which need the large open spaces. The 192m-high building has 35 floors above ground and 4 below ground. The structure is a steel frame using CFT columns to feature the high-performance oil dampers and the buckling restrained braces for vibration control. First, an outline of the structural design of this building is presented. Second, we introduce the transfer frame adopted to realize the large open spaces in the lower part, and the long column supporting the corner part of the high-rise building to avoid making a shade on the adjacent Hibiya Park, which are the feature of this building. Finally, we present an outline of the latest highly efficient semi-active oil dampers adopted in this building, and the vibration responses of this tower.

• 한국CDE학회논문집
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

In recent years, numerous studies have attempted to extract quantity data by using Building Information Modeling (BIM). In terms of open-BIM based quantity take-off at the early design stage, only few studies were conducted in the field of cost engineering. A lack of compatibility of open BIM for information exchange is postulated as the cause. The Industry Foundation Classes (IFC) extension model has been developed to accommodate the interoperability with quantity take-off software. Improvement of open BIM for quantity take-off needs exchange requirements and model guidelines. For this purpose, the quantity data of IFC models were analyzed using BIM analysis tools. This paper also provides a proposal of requirements on open BIM based quantity take-off at the early design stage. Further this study have been develop the interface system for open BIM based quantity take-off requirements with the results on this study.

• 한국조경학회지
• /
• 제29권6호
• /
• pp.21-26
• /
• 2002

The propose of this study is to suggest objective data to be utilized for a plan and the improvement of open space through the analysis of people's behaviour and satisfaction after the introduction of an opened-fence around offices followed by a plan for wall-afforestation of public institution's. The sites examined are four offices; two of them have opened-walls and the others have traditional enclosure. Analysis of frequency is conducted to understand the actual use according to people's individual peculiarities. Pearson's correlation analysis, t-test, multiple regression analysis are carried out to find out relations of fluents. In the end, the satisfaction is high in public institution satisfaction, entrance, space perception. stability, Landscaped office with opened-fence rather than fence, and the increase in usage of fluent of public institution satisfaction, entrance, space perception. stability, confusion brings about rising of use-satisfaction. Satisfaction with the exterior of building is the most important variable that influences the whole urban open space. Furthermore the influences of the approach and stability having connection with open or not-open fence is major variable affecting satisfaction of use of open space. Whether open or not is important factor on satisfaction of open space of office building. Through this study, we can find that opened fence determines use satisfaction of resting space of outdoor-office. So factors affecting satisfaction must be regarded as important requisite on planning, design, development and management in plan for afforestation of fence at public institution.

• Journal of Computational Design and Engineering
• /
• 제2권1호
• /
• pp.16-25
• /
• 2015

Since construction projects are large and complex, it is especially important to provide concurrent construction process to BIM models with construction automation. In particular, the schematic Quantity Take-Off (QTO) estimation on the BIM models is a strategy, which can be used to assist decision making in just minutes, because 70-80% of construction costs are determined by designers' decisions in the early design stage. This paper suggests a QTO process and a QTO prototype system within the building frame of Open BIM to improve the low reliability of estimation in the early design stage. The research consists of the following four steps: (1) analyzing Level of Detail (LOD) at the early design stage to apply to the QTO process and system, (2) BIM modeling for Open BIM based QTO, (3) checking the quality of the BIM model based on the checklist for applying to QTO and improving constructability, and (4) developing and verifying a QTO prototype system. The proposed QTO system is useful for improving the reliability of schematic estimation through decreasing risk factors and shortening time required.

• 한국CDE학회논문집
• /
• 제16권2호
• /
• pp.92-103
• /
• 2011

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. A Building Information Modeling (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. building SMART has developed Industry Foundation Classes (IFC) standard for interoperability of BIM based information. Several software tools are already IFC-compliant. However, there are a lot of problems related to efficient interoperability of software owing to the lack of guide regarding the software usage and insufficiency IFC interfaces of software. The purpose of this study is to suggest efficient IFC support interface development methodologies of existing IFC certified software. The scope of this study is interoperability test for open BIM based quality assurance. To achieve this purpose, the authors have classified subject of open BIM based quality assurance and investigated IFC certification process and certified software. In addition, the authors have exported and imported via IFC files using different IFC interfaces in the software for interoperability of architectural objects and their properties. Finally, the authors have suggested IFC support interface development methodologies and hereafter direction for efficient interoperability of IFC certified software based on open BIM.